Marvin Ultimate Double/Single Hung Top Sash Channel Balance, Mill Finish
2 Sash Stop V784. Window Type: Ultimate Double Hung / Single Hung. Finish: Mill / Aluminum. Balance Type: Double-ribbed channel balance. 2 Check Rail Plug and Pile Weatherstrip. Locate the ID code (stamped number and weight code) from your existing balance tube.
Marvin Ultimate Double Hung Sash Lock w/ Tilt Feature CAV.8 P.N. 41131
Markings: CAV.8 P.N. 41131. This lock has a built-in tilt feature – a small cam under the sash lock retracts the tilt latches for easy tilt-in operation. Marvin Ultimate Double Hung Sash Lock with Tilt Feature.
Marvin Sash Pivot Pin For Integrity Double Hung Windows Sash Pivot Pin
Sash Pivot Pin for Integrity Double Hung Windows by MarvinOriginal sash pivot pin looked different and was handed (see second image for comparison). This is the replacement that Marvin manufactures. Non-handed (can be used on either side of window)Contents: 1 Pivot Pin
Marvin Inactive / Dummy Trim for Passive door – PVD Brass
Marvin inactive or dummy trim for hinged passive door. Inactive: Levers move so they can operate an inactive lock, No Thumb TurnÂ. Related Marvin Trim for Inactive or Dummy Hardware Color / Finishes: High Performance (PVD) Polished Brass (will not tarnish).
Marvin Inactive/Dummy Trim Passive Door Satin Chrome
Marvin inactive or dummy trim for passive door. Levers move to operate inactive lock with no thumb turn, or convert to dummy with fixing plate where levers do not move. Inactive: Levers move so they can operate an inactive lock, No Thumb Turn.
Marvin Screen Door Rollers 2 Pack Replacement Wheels For Top Hung Screen Doors
We are an Authorized Distributor for Andersen, Larson, Marvin, Pella, GU Ferco, Hoppe, Emtek, Roto, Milgard, Peachtree, Weathershield, and many more. Shop our store for your door and window hardware needs. Customer Service Hours Monday- Friday 8am-4pm CST Screen Roller Assembly Replacement wheels for Marvin 9311006 (top hung screen roller assembly) Includes: 2 – Rollers 2 – Machine Screws To Install New Rollers – Remove screen panel with roller bar from the door and disconnect the roller from the roller bar. – Drill through the rivet holding the screen roller to the height adjustment mechanism. – Remove the roller and align the new roller into position. – Insert the attachment screw through the hole left by the removal of the rivet. – Tighten the screw. Priced and sold as a package.
Marvin Ultimate Casement Folding Handle With Cover – Right Hand 4-3/8″
This is the right hand version and includes the handle, cover, and set screw. The Casemaster series uses a smaller 3-5/8″ handle – this is not the Casemaster version. There are two sizes of covers and handles for Marvin windows.
Mortsie Lock Single Point Active 60mm Backset Marvin, Caradco, Jeldwen doors
ingle point active lock (SPL) for Marvin Ultimate and other inswing doorsmanufactured 1/17/2000 to present.For mortise lock faceplate, see part # 395040Lock Body Type: American cylinderHandle spacing: 3-5/8 inch (92 mm) Center of handle to center of cylinderBackset: 2-3/8 inch (60 mm) Measured from door edge to center of handleBackset without Face plate (measures 2-5/16 as shown in 2nd image)Deadbolt throw: 1 inch (25.4 mm) TaperedPatent NO. 6,209,931Single point locks used by Marvin, Caradco, Jeldwen and othersPriced and sold each.NOTE: Does Not include faceplate or Strike, lock body onlyScrew between Latch and Deadbolt is a # 6 Flat head, not includedChange Handing:1. Insert screw driver into slot behind latch2. Pull down on handing release, latch pops out3. Rotate latch and push back into lock caseALWAYS Check Function of lock before closing doorOperation:1. Lift handle to engage2. Turn Thumbturn or key to extend the deadbolt
Mortise Lock Active Multi-Point Lock Body Fits Marvin Ultimate Inswing Doors
We are an Authorized Distributor for Andersen, Larson, Marvin, Pella, GU Ferco, Hoppe, Emtek, Roto, Milgard, Peachtree, Weathershield, and many more. Shop our store for your door and window hardware needs. Customer Service Hours Monday-Friday 8am-4pm CST Marvin Ultimate Inswing doors manufactured 1/17/2000 to present.Active Multi-Point lock body, used with Concealed Rods that screw into top and bottom.DOES NOT include rods, lock case only. American 5 pin cylinderHandle Spacing: 3-5/8 inch (92mm)Backset: 2-3/8 inch (60mm) with faceplate (measures 2-5/16 as shown)Tapered Deadbolt throw 1 inch (25.4mm)Markings: Patent NO. 6,209,931Marvin Part Number 05700130Marvin Related Parts:40160 – Single point lock, no rods395040 – Face plate for single point lockHow to Operate Lock:1. Lift handle to Extend vertical shootbolt rods2. Turn Key or Thumbturn to extend deadbolt and secure rods in locked position3. Reverse process to unlock door.Change Handing:1. Insert screw driver into slot behind latch2. Pull down on handing release, latch pops out3. Rotate latch and push back into lock caseAlways check function of lock before closing doorRemoval / Installation Note:Removal:1. Remove door from hinges and lay on edge2. Remove Top and Bottom plastic guides, held in place with Philip head screw3. Remove rods from top and bottom of door, Unscrew, counter clockwise4. Remove handle set and faceplate5. After removing faceplate from door edge, remove screws holding lockInstallation:1. Install lock body in door2. Re-install Lock faceplate and handle set.3. Test lock after you install in door and before putting the plastic guides in place.4. If working properly, install plastic guides and try again, Shootbolts should extend 3/4″ – 1″5. Install door back in frame and test lock again before closing door.NOTE:You can disconnect the top rod and most of the time pull the bottom rod out with the gearbox.However, to get it back in the door, the plastic guide in the bottom is a problem, and you will most likely have to remove the guide to get the rod back in the door.
Marvin Ultimate Casement Awning Sash Lock Handle w/ Escutcheon Color 9
For units manufactured 10/04/2008 and later. Part number 93550020. Component: Lock Handle and Escutcheon. For units manufactured before 10/04/2008, the older lock handle and escutcheon has been discontinued and replaced by this current style.