2 Pcs Max Water O ring for BB Filter Housings Size 10″ & 20″x4.5″ Double Oring C
2 Pcs Max Water BB O ring for Big Blue water filter housings size 10 Inch & 20 Inch x4.5 Inch(Double Oring) Please check your O ring CS size before consider buying this item. This o rings will not fit to our single o rings filter housings model. Please make sure you are ordering the right spare O rings. FDA Graded Inside Diameter / ID = 5-5/8 inch Outside Diameter / OD = 5.75 inch CS / 0.170 inch If you are looking for 10 inch & 20 inch Double o ring Non Brass PVC Port Please Click Here 153184443697 If you are looking for 10 inch & 20 inch Single o ring Please Click Here 152015455855NOTE: this o-ring will fit only this housing head please check before you purchase (Brass NPT port + 1/8″ Gauge Hole)
6 Pcs Standard double O Ring 10″ Housings for Max Water Reverse Osmosis Systems.
6 Pcs Standard 10 Inch Double O ring housing O Rings for Max Water reverse osmosis systems and double o-ring 10″ whole house systems. Max Water Reverse Osmosis 10-inch Heavy Duty Housings O Ring. Please make sure about the O ring sizes before buying this item. For Single o-ring please click here 153094140666Diameter: 3 O rings CS = 3.5 MM //Approx 1/8 inch OD = 85 MM // Approx = 3-1/2 inchID = Approx 3-1/4 inch and 3 O rings CS = 3.5 MM //Approx 1/8 inch OD = 84.3 MM // Approx = 3-1/3 inchID = Approx 3.15 inch
3 Stage lime Anti Scale Inhibiting 10″ White Whole House Water Filtration System
Detailed Description: 3-stage Whole House/Cottage Water Filter Are you concerned with scale and mineral deposits in your pipes and appliances? Our 10” Standard Whole House is a cost effective for smaller spaces such as RV’s, apartments, cottages and any other light duty applications where space is at a premium. This system will not disinfect water should only be used in areas where the water supply is biologically safe, or in conjunction with a UV sterilizer or other disinfection techniques. If you have a larger home/cottage or have more than 2 people using the water consistently, you may want to consider looking at some of our higher capacity systems. Pre-loaded Filter Cartridges: –> –> Vertical Hydraulic Gauge Having a pressure gauge is helpful in monitoring your incoming water pressure, internal unit pressure & when to replace the filters. It’s best to replace the filters when you see changes in reading start, an increasing pressure drop is a good indication that the cartridges are starting to clog with particulate or the filter’s media is exhausted as the water inside the system can’t pass through the filters normally. Removes/Reduces: Sediment (silt, dirt, rust, ETC.) Pesticides Bad Taste & Odors Giardia Cysts Chlorine Turbidity Herbicides VOCs (Volatile Organic Compounds) THMs (Trihalomethanes) MTBEs (Methyl Tert-Butyl Ethers) Includes: 1x 3-Stage White Steel Mounting Bracket Set of 3 filters 3x 10″ Filter Housing, ¾ NPT Inlet/Outlet 1 x Opening Spanner / Wrench 2x Dry Pressure Gauges Specifications: Filter Life: Approx. 6 to 12 months Maximum Recommended Operating Pressure: 90 psi Maximum Operating Temperature: 125°F Recommended Operating Temperature Range: 40-100°F Dimensions: H 14 inch x W 5.25 inch x L 17 Total Weight: Approx. 14 Lbs with Filters Flow Rate: 1-10 gpm* for ¾” Inlet/Outlet *Pressure drop will be determined based on feed water pressure, filter cartridge, fluid viscosity, filter life and conditions. Replacement filters for this system. Sediment, Iron Manganese, CTO Filter Set192248132458 Filter cartridges should be changed every 6-12 months under domestic conditions. Filter life varies and depends on the water source quality. –>
Reverse Osmosis RO 100 GPD Booster Pump + Transformer
Detailed Description: Reverse Osmosis 100 GPD Diaphragm Booster Pump 110 ACDC 24 V Transformer + 2 Pcs Connect Fittings (1/4 tube x 3/8 Threaded) Note: Using Booster pump is recommended for those who they have low incoming city water pressure less than 50 PSI or well water tank pressure 40 – 60 PSI. Buy this product only when your waste is not shutting off and/or the tank is not filling up after 2 hours. (do not buy this pump if you are on city water pressure is 55 PSI and up). Contact us first if you are not sure what you are buying. This pump will not increase the production volume or the pressure for those who they are on city water pressure 55 PSI and up. This pump will not help for those who would like to increase the water transfer volume to the ice maker or the fridge, that product named a demand pump or delivery pump which is completely different product. Reverse osmosis systems will increase your system input pressure then will increase the water production & purity as well if your city water pressure is lower than 50 PSI. Boost pressure 80 PSI Increases your membrane performance if your municipality water pressure (PSI) rated low. Using Booster pump for Reverse osmosis systems will increase your system input pressure then will increase the water production & purity as well. Boost pressure 80 PSI. High pressure switch for reverse osmosis booster pump (on – off) operation control is required to operate you RO system automatically. High pressure switch job is to turn off the booster pump when the tank is full. This auction includes: pump, transformer and two fittings only. Features: This 100 GPD booster pump is designed for membranes rated 100 GPD. It can be mounted in several positions Safe power operation with, low energy (low voltage – 24 volt). Transformer included. The motor of these boosters is Duty cycle will vary with load and ambient temperature; smoother running; longer life; and work with high efficiencies never Mind if its installed in warm, humid, hostile environment where other pumps can’t operate in such hard environments. Product total weight with transformer 6 Lbs – Booster dimensions 6.5 inch X 4 inch X 4 inch TransformerApproved. Detailed Description: All required fittings & instruction manuals are included to DIY your own installation. Warranty: One Year Limited Warranty. Pump Specifications Volts :24 VDC AMPS: 1.2A Open Flow: 60 L/H this pump is to be used with reverse osmosis systems only Transformer Specifications: Input 110 AC Output Volts :24 Volt DC