Linear MultiCode MCS2022 (MCS1090 2 MCS308911) Remote & Receiver Kit Gate Opener
Linear MultiCode MCS2022 (MCS1090, MCS308911) Remote & Receiver Kit Gate OpenerGate Receiver300MHz, 10 dip switchesMulti-Code Double Set includes one 1090 receiver and two 3089 transmitters The receiver is programmed with a 10-position coding switch. When a Multi-Code transmitter set to the same code is activated, the receiver’s output will activate, triggering the gate operator. The Multi-Code 109020 by Linear Corporation MCS109020 radio receiver is directly compatible with the following model remotes to control one device:Carper: CX-300Multi-Code: 3089, 4120, 4140.Multi Elmac: 3089.Chamberlain: 300MC.Not all compatible models may be listed Features: Activates one gate or garage door openerMulti-Code 300MHzIdeal for use on gate openersSpecifications: One channel10 Dip Switches Codes: 1,024 (set by dip switches)RF frequency: 300 MHz
Linear MultiCode MCS109950 300/310MHz 10 Dip Switch 12/24v Gate Opener Receiver
Linear MultiCode MCS109950 300/310MHz 10 Dip Switch 12/24v Gate Opener ReceiverGate Receiver12-24V inputAntenna and 3′ coaxial cable suppliedDual frequency Multi-Code (300MHz) or Stanley (310MHz) compatible, 10 dipswitchesThe Multi-Code 109950 by Linear Corporation MCS109950 radio receiver is directly compatible with the following model remotes to control one device:Challenger: MC1010, MC1020, MC4210, MC4220.Carper: CX-300Digi Code: 5010, 5060, 5030, 5040, 5070.Heddolf: M219, M220.Multi-Code: 1083, 3060, 3070, 3083, 3089, 4120, 4140.Multi Elmac: 3089.Chamberlain: 300MC.Not all compatible models may be listed Features: Activates one gate or garage door openerDual frequency can be set to either Multi-Code 300MHz or Stanley 310MHz mode by internal jumperAuto voltage sensing no jumper needed to set operating voltageIdeal for use on gate openersAntenna with 3 ft. coaxial cable and bulkhead connector are includedOptional remote antenna mounting kit for maximum range sold separately One-Year manufactures warranty Specifications: Power: 12-30 Volts AC or 10.5-30 Volts DCFrequency: 300MHz or 310 MHz jumper selectableContacts: One N/O rated at 1 Amp 30 VoltsCodes: 1,024 (set by 10 dip code switches)Dimensions: 5.5 x 1.5 x 3.625 inches
Linear MultiCode MCS109020 300MHz 10 Dip Switch 1 CH Gate Door Opener Receiver
Linear MultiCode MCS109020 300MHz 10 Dip Switch 1 CH Gate Door Opener ReceiverGate Receiver300MHz, 10 dipswitches The receiver is programmed with a 10-position coding switch. When a Multi-Code transmitter set to the same code is activated, the receiver’s output will activate, triggering the gate operator. The Multi-Code 109020 by Linear Corporation MCS109020 radio receiver is directly compatible with the following model remotes to control one device:Carper: CX-300Multi-Code: 3089, 4120, 4140.Multi Elmac: 3089.Chamberlain: 300MC.Not all compatible models may be listed Features: Activates one gate or garage door openerMulti-Code 300MHzIdeal for use on gate openersSpecifications: One channel10 Dip Switches Codes: 1,024 (set by dip switches)RF frequency: 300 MHz
Linear / Multi-Code MCS109950 12/24V Gate Operator Receiver, 12-24V, 109950
Linear / Multi-Code MCS109950 12/24V Gate Operator Receiver, 12-24V, 1-Channel Linear / Multi-Code MCS109950 12/24V Gate Operator Receiver, 12-24V, 1-ChannelThe Model 109950 1-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver’s Type-F antenna connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used with this receiver.The Model 109950 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator’s radio activation terminals.The receiver is programmed with a 10-position coding switch. When a transmitter set to the same code is activated, the receiver’s output will activate, triggering the gate operator.The Model 109950 is compatible with Multi-Code and Stanley transmitters only.FeaturesOperates on 12-24 volts AC or DC powerOne channelWhip antenna3-foot antenna coax and bulkhead connectorCodes: 1,024 (set by dip switches)RF frequency: 300 MHz or 310 MHz (jumper selectable)Dimensions: 3.625″ W x 5.25″ H x 1.5″ DOrder number: MCS109950 Payments & Returns Policy