MEPLA SATIN/ANTIQUE BRASS REPLACEMENT KNOBS AND PULLS, YOUR CHOICE!
This lot consists ofONE piece (your choice from the picture above. Screws for 3/4″ thick material included. ).
MEPLA SATIN/POLISHED CHROME REPLACEMENT KNOBS AND PULLS, YOUR CHOICE!
This lot consists of ONE piece (your choice from the picture above. Specify the letter when ordering) of a Mepla cabinet knob or pull (all discontinued #’s). Sold ‘AS IS’ as replacements for missing or damaged originals. Screws for 3/4″ thick material included. For reference, the letters refer to original Mepla #’s: A = 5163/110mm (satin chrome finish), B = 6087/110mm (satin chrome finish), C = 5208/070mm (satin chrome finish), D = 6132/096mm (polished chrome ends with white insert), E = 5144/060mm (missing backplate, satin nickel finish; suitable for desk grommet with a 2-1/8″ diameter bore), F = 5103/055mm (polished chrome with black backplate). Powered by eBay Blackthorne 04.02.019
Rare MEPLA Mini/Compact Hinge 1356602 w/ Slide-On Base Plate 4176/77 (25mm)
Rare MEPLA Mini/Compact Hinge 1356602 w/ Slide-On Base Plate 4176/77 25mm cup size. 1356602 012 under the cup, 4176/77 on the mount plate. Very good condition. VERY hard to find. Sold as pictured.
MEPLA Hinge 674.329.53.00 Self Closing for use w/ Slide/Screw-On Mounting Plates
MEPLA Hinge 674.329.53.00 Self Closing for use w/ Slide/Screw-On Mounting Plates Good used condition. Sold as pictured – mounting plate not included.
MEPLA 9M Cabinet Hinge with Custom-Fit Base Plate 348.258.00.32 – NEW
See photos for details on hinge and base plate modifications.
NEW Mepla Flap Hinge 90° 696.235.05.00 509.235.05.00 301.235.51.00
35mm cup in the door or flap.
MEPLA Hinge ACC 162 Self Closing 3/8″ Overlay 510.356.00.13 Flat Top 110 Degree
2X New MEPLA ACC 162 HINGE, 510.356.00.13, 1/2″ Overlay Flat Top 110 Degree
I will get back with you ASAP.
MEPLA Hinge ACC 162 Self Closing 1″ Overlay 276.656.50.2515 110 Degree
Hinge Model Number: 698.256. Box Model Number: 276.656.50.3215.
MEPLA ACC 162 HINGE, 510.356.00.13, 1/2″ overlay, Flat Top
This sale is for: MEPLA ACC-162 cast zinc hinge, cleaned, inspected, lubricated and in great working order. This hinge has a built-in plate that is designed for a 1/2″ overlay.IMPORTANT! This hinge has typical break points that most sellers may not even notice (i.e.: hairline cracks in the metal, broken pin retaining holes, broken plastic, etc…) We thoroughly inspect our hinges before selling. ALSO, IMPORTANT This sale is for a Flat/Square Top type “A” (see photo 4 above) hinge. There are two different hinges that use the 510.356.00.13 number Flat/Square Top “A’ and Round Top “B”. Mepla made many similar hinges with different overlays and different numbers. Make sure yours ends in “.13”, otherwise you need a different hinge. Please feel free to contact us to see if we might have what you need. Markings on hinge: “MEPLA” and “510.356.00.13” and “698.256.50.00” It is your responsibility to determine if this hinge will work for your installation! If you have questions, please contact me. These hinges are no longer available from Mepla or Mepla distributors. Technical info: Hinge bores use a 35mm bit drilled 1/2″ deep. An order consists of one hinge. Your order will go out, usually the next day, in a USPS Flat-Rate Box or Ground Advantage Padded Envelope (2-5 day delivery) to anywhere the US Post Office will deliver. This includes Alaska, Hawaii, Puerto Rico and other US Territories. Can also ship overseas via International Shipping Center. Please contact me with any questions or before leaving poor feedback. Thanks for looking! Depending on the item, we generally send out packages the next day after purchase (about 95% of items sold). We list “5-day handling” time for the larger items or items located in our storage facility.