MFM SubSeal40 Waterproof House Wrap 40 mil
The MFM SubSeal-40 is a self-adhering, 40 mil, waterproofing membrane that is composed of a polymer film with a layer of specially formulated, rubberized, asphalt adhesive that is suitable for use on siding and exterior plaster. This combines strength and flexibility to create an ideal sealing foundation for walls, exterior walls, through-wall flashings, around doors and windows, underneath stucco, plaster and masonry, planters, pot shelves, and as a flashing material. SubSeal 40 has a broad temperature range allowing installation in cold weather and can adhere to most clean, dry surfaces including metal, wood vinyl, masonry, ICF foundations, Gold Bond, and rigid insulation boards. It is easy to cut Subseal to shape using scissors or a sharp knife if an alteration in the size of the membrane is needed. For the best adhesion, SubSeal can be applied by rolling the entire surface with a hand roller while focusing attention, particularly on seams. This particular membrane must be covered within 90 days of application. MFM backs SubSeal 60 with a 10-year limited warranty. FeaturesHigh strength, high elongation, and flexibility that help the membrane to contract and expand with the surface of the buildingOuter film surface is compatible with most construction sealantsIdeal for below grade foundations and structures and specially formulated for extreme moisture protectionProtects ICF foundations and insulation boards from damage during backfillRubberized asphalt won’t crack or drySelf-seals around fasteners including nails, staples, and screwsUniform thickness for protection that is dependableQuick and easy installation SpecificationsRoll Length: 75 ft.Roll Width: 4in., 6in., 9in., 12in., 18in., 36in.Roll Coverage: 225 square ft.Roll Weight: 4in.- 7lbs., 6in.- 11lbs., 9in.- 16lbs., 12in.- 21lbs., 18in.- 31lbs., 36in.- 62lbs.Roll Thickness: 40 mils.Compliant Codes: ASTM D 1970, ICC-ES AC 38, ASTM E 96, ASTM D 779, ASTM D 1970, ASTM D 882
MFM Shingle Starter Strip Self-Stick Roll
The MFM ShingleStarter? is a 50 mil self-adhering starter course for asphalt shingle roofs that eliminates the need to cut shingle tabs. Fast and easy installation along the roof edge. Helps prevent damage from ice dams and comes with a sealing strip to also prevent wind uplift at the roof edge. This black sanded surface underlayment adheres directly to the roof deck. MFM ShingleStarter may be left exposed for up to 30 days. Features7.2″ width starter shingle courseSaves time, labor and material costsSelf-sealing tab on edge for good adhesionSelf-adhering, mineral surface membraneMinimum slope for installation is 2″ per footInstalls under roofing at the edgesProtects from leaks caused by ice dams, melting snow and blowing rainPackaged in Tri-Lingual (English, Latin-American Spanish and French Canadian) shrink wrapped sleeves that includes product features and installation instructions SpecificationsWidth per Roll: 7.2 in.Length per Roll: 33.5 in.Weight per Roll: 8 lbs. Helpful DocumentsShingle Starter Installation InstructionsTechnical Data SheetMSDS SheetWarranty
MFM Peel & Seal Self Stick Roll Roofing
It can also be used as flashing around ducts, vents, chimneys, air conditioning units, or even gutters. Works on low slope and low pitch roofs. Waterproof and weather resistant.