Ultra Custom Pools

Item Tag: Midnite Solar

MIDNITE SOLAR 20 AMP DC Panel Mount Circuit Breaker MNEDC-20 – FREE SHIPPING!

CIRCUIT BREAKER, 20A 150VDC, 1-POLE, PANEL MOUNT, MIDNITE SOLAR MNEDC-20, SAME BREAKER AS OUTBACK POWER PNL-20-DCMNEDC-20: 20 Amp, 150VDC, 1/4” stud terminals, Width is 0.75″ or 19mmThe panel mount breakers are 3/4″ wide and just under 1.5″ tall (1.438″ height at switch point opening). They come with two mounting screws and mount to the panel on the front side. The mounting screw holes are spaced at 2.062″ apart on center. The total depth of the breaker is 2.525″ from the front mounting screw to the back edge of the wire mounting lug. Reference dimensional diagrams in listing photos for details. The breakers mount to your existing panel mount breaker enclosure. If you need an enclosure for these breakers, please see our separate listing for the Midnite Solar QUAD Panel box enclosure. The MNEDC-QUAD enclosure is already set up with the knockouts and front mounting holes pre-drilled for up to (4) of the panel mount breakers. See our separate listing for the QUAD box. Specifications:Front panel mount, single pole with stud terminals on the back. Ring terminals required.MNEDC-20: 20 Amp, 150VDC, 1/4” stud terminals, Width is 0.75″ or 19mmManufactured by Carling Technologies. Product Highlights Panel mounted hydraulic-magnetic type breakersRated for 100% continuous duty cycleNot affected by high ambient temperaturesNon-polarized for use in any wiring orientationCan be used for input, output or load circuitsIncludes (2) QTY front panel mounting screws (not pictured but are included)! Item will normally ship within 12-24 hours or less after cleared payment. Free USPS First Class Shipping Delivers your purchase USUALLY in 2-5 days after shipment to any of the 50 United States of America OR IT”S PROVINCES! If you are ordering 4 or more breakers from us, we will automatically upgrade your shipping to USPS Priority Mail for even faster delivery depending on your location.

Midnite Solar MNEDC250 250Amp 125VDC Panel Mount Breaker

Midnite Solar MNEDC250 250 Amp 125VDC Panel Mount Breaker MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting. All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.Breaker Torque Value: 15 Ft-Lbs (20.4NM)NON POLARIZEDEnvironmental Rating – Type 1 (Indoor)Width 1.5 inches (39mm)125VDC Panel Mount Breaker – 3/8″ studsAIC 50,000 at 125VDCBreaker Torque Value: 15 Ft-Lbs (20.4NM)Includes two 10-32 x 3/8 Pan Head Phillips mounting screwsWarranty – 5 yrs.Listed for US & CanadaCalifornia Residents: WarningDescription: 125VDC Panel Mount Breaker – 3/8″ studs 1.5″AIC 50,000 at 125VDC

Midnite Solar MNEPV15-150-1PNP Breaker 15A 150VDC 1Pole DIN NON-POLARIZED

Midnite Solar MNEPV15-150-1PNP Circuit Breaker 15A 150VDC 1-Pole DIN NON-POLARIZED 150VDC din rail mount breaker (13mm wide) MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. Always use a properly sized breaker for disconnecting.NON POLARIZEDEnvironmental Rating – Type 1 (Indoor)DC Voltage Rating – 150VDCWire Size Range – 14 to 6 AWGWidth – 0.5 inches (13mm)Number of poles – 1Listed for US & Canada10,000 AICNote: Branch circuit rated 489A All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure. Breaker Torque Value: 20 In-Lbs (2.3NM)

Midnite Solar MNEPV100 Circuit Breaker 100A 150VDC 1-Pole DIN Mount

MIDNITE SOLAR MNEPV100 CIRCUIT BREAKER 100A 150VDC 1-POLE DIN MOUNT Midnite Solar Din Rail Mount Circuit Breaker 100A, 150VDC MidNite breakers have been evaluated by ETL to 150VDC and are listed for US and Canada. All of the NRTL listings still apply. Always use a properly sized breaker for disconnecting. All MidNite circuit breakers are rated for 100% continuous duty. Accepts up to #2 wire. 10,000 AIC. These breakers can be used in Midnite E-Panels, Combiner Boxes, DC Disconnect Enclosures and Baby boxes. These are standard DIN rail mount, and fit nearly all array combiners, including Outback Power and Midnite Solar. This double breaker mounts on a standard 35mm din rail. Please Note: The MNEPV 80 and 100 Amp Din Rail mount breakers take up two breaker spots in a din rail mount enclosure. It consists of two 13mm breakers working together. 100 amp 150VDC Din Rail Mount Breaker, 10,000 AICUL & CSA ListedAccepts up to AWG#2 wire Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier – USAUP TO 50% DISCOUNTSTOP BRANDSPaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. See our other itemsThank you for visiting our Ebay store!Midnite Solar Din Rail Mount Circuit Breaker 100A, 150VDC MidNite breakers have been evaluated by ETL to 150VDC and are listed for US and Canada. All of the NRTL listings still apply. Always use a properly sized breaker for disconnecting. All MidNite circuit breakers are rated for 100% continuous duty. Accepts up to #2 wire. 10,000 AIC. These breakers can be used in Midnite E-Panels, Combiner Boxes, DC Disconnect Enclosures and Baby boxes. These are standard DIN rail mount, and fit nearly all array combiners, including Outback Power and Midnite Solar. This double breaker mounts on a standard 35mm din rail. Please Note: The MNEPV 80 and 100 Amp Din Rail mount breakers take up two breaker spots in a din rail mount enclosure. It consists of two 13mm breakers working together. —100 amp 150VDC Din Rail Mount Breaker, 10,000 AIC —UL & CSA Listed —Accepts up to AWG#2 wire MIDNITE SOLAR MNEPV100 CIRCUIT BREAKER 100A 150VDC 1-POLE DIN MOUNT Midnite Solar Din Rail Mount Circuit Breaker 100A, 150VDC MidNite breakers have been evaluated by ETL to 150VDC and are listed for US and Canada. All of the NRTL listings still apply. Always use a properly sized breaker for disconnecting. All MidNite circuit breakers are rated for 100% continuous duty. Accepts up to #2 wire. 10,000 AIC. These breakers can be used in Midnite E-Panels, Combiner Boxes, DC Disconnect Enclosures and Baby boxes. These are standard DIN rail mount, and fit nearly all array combiners, including Outback Power and Midnite Solar. This double breaker mounts on a standard 35mm din rail. Please Note: The MNEPV 80 and 100 Amp Din Rail mount breakers take up two breaker spots in a din rail mount enclosure. It consists of two 13mm breakers working together. 100 amp 150VDC Din Rail Mount Breaker, 10,000 AICUL & CSA ListedAccepts up to AWG#2 wire Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier – USAUP TO 50% DISCOUNTSTOP BRANDSSee our other itemsPayment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Thank you for visiting our Ebay store! Midnite Solar Din Rail Mount Circuit Breaker 100A, 150VDC MidNite breakers have been evaluated by ETL to 150VDC and are listed for US and Canada. All of the NRTL listings still apply. Always use a properly sized breaker for disconnecting. All MidNite circuit breakers are rated for 100% continuous duty. Accepts up to #2 wire. 10,000 AIC. These breakers can be used in Midnite E-Panels, Combiner Boxes, DC Disconnect Enclosures and Baby boxes. These are standard DIN rail mount, and fit nearly all array combiners, including Outback Power and Midnite Solar. This double breaker mounts on a standard 35mm din rail. Please Note: The MNEPV 80 and 100 Amp Din Rail mount breakers take up two breaker spots in a din rail mount enclosure. It consists of two 13mm breakers working together. 100 amp 150VDC Din Rail Mount Breaker, 10,000 AICUL & CSA ListedAccepts up to AWG#2 wire