Ultra Custom Pools

Item Tag: Monocrystalline

100W 200W 300W Watt Mono Solar Panel kit 12V RV Caravan Power Home Off Grid Boat

Bootstrap 实例 – 缩略图 Higher Efficiency Werchtay uses an anti-reflective, low iron-tempered glass on top, with high transparency of up to 91.5%.Compared with conventional solar panels, it allows more direct sunlight to be converted to electrical power. Reliable & Durable This Werchtay solar panel is made of advanced encapsulation material with multi-layered sheet laminations to protect cells from physical damage or distortion, improving cell performance and providing lasting solar panel durability. Pre-Drilled Holes for Easy Installation Comes with pre-drilled holes, including ground mounting holes for fast and convenient installation.Compatible with Werchtay Z Brackets, Corner Brackets, Pole Mounts and Tilt Mounts. Rugged Aluminum Frame Corrosion-resistant aluminum frame design with sturdy corner supports ensures that it endures the outdoors for an extended period of time without damage or loss of performance. IP67 Solar Connectors No need to worry about bad weather. These IP67 waterproof solar connectors ensure that the water and dust will not enter the connector during extended outdoor use. Effectively preventing water from seeping in. Perfect for your yacht and marine applications. IP65 Junction Box Complete protection against environmental particles and low-pressure water jets.

400W Watt 12v Mono Solar Panel kit RV 12V Off Grid RV with Battery and Inverter

Solar panel kit is an eco-friendly power source designed for boat, home off-grid charging, camping and outdoor activities. Made from Class A monocrystalline cells, it absorbs sunlight efficiently, turning it into your portable power source. You can use this kit as well as other battery types to charge 12V deep cycle batteries. If you need a different wattage solar panel, maximum power, accessories, or kits, check out the other solar panel products in our store now.

Solar Power Panel for Blink Outdoor, XT and XT2 Camera Charger With 11.8ft Cable

– We accept the payment through :Credit, debit, and gift cards, Apple Pay, Google Pay, PayPal, and PayPal Credit. – Payment must be fulfilled within 4 days after the end of auction. – Please make sure your ebay address is correct. Or not, please correct it before payment. – If you are a big customer, Please contact with us about the items PRICE and SHIPPING. – Your feedback & suggestion is deeply appreciated, thanks. 1. Please make sure your address in ebay is correct. 2. We will only follow your address listed in the ebay orders for the shipment. 1. We can exchange the item within 30 days after you received it if it is defective. 2. Returned item must have all original packaging and accessories. 3. Buyer are responsible for the returning shipping costs. 1. We greatly appreciate your POSITIVE feedback. 2. Negative or Neutral feedback does not resolve any underlying issues that you may be experiencing as a buyer. 3. Any question or unsatisfaction please contact us with ebay message, we will sincerely solve for you. Feedback is very important to us, if you are satisfied with us, please leave us 5 star positive feedback to us. If you h have any problem, please contact us first BEFORE you give us neutral or negative feedback, so we can try our best to help you solve your problem. All rights reserved.

Nanosolar 2.6W Flexible CIGS Solar Cell – Lot of 10 NanoCells for a Total of 26W

Nanosolar 2.6W Flexible CIGS Solar Cell – Lot of 10 NanoCells for a Total of 26WIntroducing the Nanosolar Nanocell 2.6W Lightweight Flexible CIGS Solar Cell Set! Harness the power of the sun with this lot of 10 high-quality solar cells. Each cell produces an impressive 2.6 watts of clean energy. Made with advanced CIGS technology, these lightweight and flexible cells are a perfect solution for various applications. Don’t miss out on this rare opportunity to bring sustainable energy to your projects. Invest in the future with Nanosolar Nanocell! This is for a lot of 10 solar cells that total 26 watts. Each individual solar cell has a maximum electrical output (mppt) of 0.45 volts at 5.8 amps which calculates to 2.6 watts each. These CIGS solar cells took over 70 steps to produce on multiple machines with hundreds of workers in a 200,000 sf factory in San Jose California. They are made on thin flexible aluminum sheets which make them difficult to weld or solder even with Alumiflux solder flux paste. We have had success using double sided conductive tape to connect. You can see the video of the output 10 cells connected with the tape have produced in partial sun conditions. We find these cells even produce energy when placed under a light bulb. Manufacturers Specifications Raw Solar Cell Uncoated Rated Power: 2.6 Watts per cell Vmpp (V) 0.45 Impp (A) 5.8 Voc (V) 0.61 Isc (A) 6.7 Operating Module Temperature -40 to +85C Length: 165mm (6.5 inches) Width: 135mm (5.3 inches) Height: 0.4mm (0.02 inches) Weight: 18.5g per cell Raw Solar Cell Uncoated Lightweight Aluminum Structure CIGS Solar Cells which are Semi-Flexible Product manuals, data sheets, specifications, etc…. are available in the DOWNLOADS tab above.  Contact us if you have any questions. These raw flexible solar cells are extremely rare and have never been offered for sale to the public before. These came from the last experimental production runs at the Nanosolar Facility in California. The facility and company was liquidated during September and October of 2013. We can ship these in bin racks of 1,000 cells and cartons of 6,000 cells if you would like larger quantities. These raw solar cells are very robust for CIGS, however, will degrade if not encapsulated in weather tight enclosure. Its interesting for experiment we have left a few exposed and un-encapsulated for 2 years and have found minimal degradation. The CIGS solar cells are made of aluminum and to connect them we have used double sided conductive acrylic adhesive tape made by 3M / Tape Case (1182). Nanosolar used ultrasonic metal spot welders to connect the cells in production We have found a spot welder does connect them but if the settings are not just right you will blow a hole through them or the connection is weak. We believe a combination of the 3M 1182 tape and spot weld may be the best choice for DIY applications. We have had many questions regarding cutting these cells. When these cells are cut they retain their .45 volts but the amps are reduced somewhat proportionally. You cannot use regular scissors or tin snips as these are made of 2 thin sheets of aluminum separated by energy producing compounds. If the top (negative) and bottom (positive) aluminum sheets touch it shorts the cell. We have successfully cut these cells with a water-jet cutter as well as a sharp bench shear set at 45 degree angle. It is possible to cut and then sand the cut edges back until the two sheets are separated but that is a tedious task and not recommended. Also we have noticed the cut cells are not as robust as the uncut cells even when accounting for the size differences of the cells. The positive output of the cell is indicated by the large area of metal (nickel coated aluminum) on the backside. On the front side, there is a thin strip of un-coated aluminum indicating the negative output of the cell. If you have any questions about these cells, feel free to ask. These cells are sourced from the manufacturing floor of Nanosolar in San Jose and are securely stored in air-tight bags with desiccant. Each cell has undergone proper output testing by Nanosolar and has been found to be highly durable. You can preview these solar cells at our facility in Ventura, California.     Condition: New These Aluminum Solar Cells are New and Unused. They are stored in air tight sealed cartons with desiccant to prolong shelf life. They are in excellent new condition. Please view our photo set and contact us if you have any questions.CLICK BELOW FOR MORE SOLAR OPTIONSShippingBest OffersReturns