Ultra Custom Pools

Item Tag: Oil-Based

Fence Exterior Paint 5 Gallon Red Barn Livestock Safe Durable Oil Latex Adhesion

The BEHR 5 gal. Flat Barn and Fence Paint is a ready to use Barn Red finish with easy water clean-up It is a durable, advanced paint that combines the best features of oil and latex to resist mildew and UV damage for optimal color retention. This self-priming paint has superior adhesion, penetration and durability. It provides a film that is highly resistant to cracking, peeling, blistering, chalking, weathering and erosion. The livestock-safe finish offers excellent coverage and is designed to protect and beautify barns, fences and sheds. Oil-latex formula is self-priming and provides excellent adhesion and durability Dry finish is safe to use around livestock Resists mildew growth to maintain an attractive finish Excellent hiding capability for optimal coverage 5 gallon covers up to 2,000 sq. ft. depending on application, color and surface porosity Alkali-resistant, acrylic latex base provides excellent adhesion Resists mildew growth to maintain a beautiful appearance Self-priming formula Dimensions Container Size 5 Gallon Coverage Area (sq. ft.) 2000 sq ft Details Application Exterior Home & Trim Application Method Brush, Paint Sprayer, Roller Base Material Oil Based Color Family Red Color/Finish Red Dry to touch (min.) 180 min Interior/Exterior Exterior Maximum Optimal Temperature (F) 90 Minimum Optimal Temperature (F) 50 Number per Package 1 Paint/Stain Clean Up Soap & Water Paint/Stain Features Mildew Resistant Recommended Number of Coats 2 Returnable 30-Day Stain & Sealer In One No Substrate Condition Damp Wood, Finished Wood, Old/Reclaimed Wood, Pressure Treated Wood, Unfinished Wood Substrate/Surface Material Use Wood Surface Location Barn & Fence Time before recoating (hours) 8.0 Vertical/Horizontal Vertical

Armor AR500 Solvent Based High Gloss Acrylic Wet Look Sealer – 5 GAL

The Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces, and enhance surfaces with a high gloss wet look finish.The Armor AR500 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.Benefits:Will darken the surface to make it look wet, bringing out any dull and faded coloringProtective surface film will reduce damage and deterioration caused by water absorption and surface abrasionProtective surface film will reduce the growth of mold, mildew, and algae on the surfaceMade from non-recycled US manufactured resinsEasy to apply, easy to maintain, easy to re-coatUV resistant, breathableUses:The Armor AR500 is a great choice for a variety of interior and exterior concrete applications, including:Pool decks and patiosDriveways, walkways, and stairsGarage and basement floorsRetail and shop floorsWarehouse floorsMuch more!The AR500 can be applied to a variety of interior and exterior concrete surfaces, including:Stamped concretePoured and broom finished concreteExposed aggregate concreteConcrete paversThe Armor AR500 is designed specifically to be used on unsealed concrete and concrete pavers. It can also be applied to concrete and concrete paver surfaces previously sealed with a solvent based acrylic. The Armor AR500 should not be used to seal clay brick, red Chicago pavers, flagstone, slate, or natural stone. If you are looking to seal clay brick, red Chicago pavers, flagstone, slate, or natural stone, consider instead of the Armor WL550 or the Armor SX5000 WB.The Armor AR500 can’t be applied over any other film forming sealer, other than a solvent-based acrylic sealer. It can’t be applied over a water based acrylic, an acrylic latex, a paint, epoxy, or urethane.AppearanceWhen applied in clear, the Armor AR500 will darken the surface to bring out the natural coloring the concrete or pavers, and seal it with a transparent high gloss finish. When applied in a color, the Armor AR500 will cover the concrete or pavers like a paint (opaque).The actual level of gloss and enhancement received will depend on the type and age of the surface, age, porosity, condition, applicator, application method, and amount of material applied. For an accurate representation of what your surface will look like once sealed, we suggest applying the product to a test area first.Product LifeWhen properly applied, the Armor AR500 can provide up to 1-3 years of life on an exterior surface before the need to recoat, and up to 2-7 years of life on an interior surface.While the Armor AR500 is designed to out-last and out-perform similar products on the market, there are several factors that can impact actual product life including the severity of surface abrasion and level of foot traffic, the porosity of the concrete or pavers, and the amount of resin build-up on the surface. Some surfaces need to be sealed every year, while others can go a few years without sealing.How To Apply:The Armor AR500 can be applied with a 3/8-1/2” nap roller, or an acetone/solvent resistant HVLP sprayer with Viton seals. For a consistent wet look and high gloss finish, apply two coats spaced 24 hours apart.Time Of DayThe Armor AR500 should only be applied in the early evening (around 5 PM or later) when air and surface temperatures are declining, and when the sun is no longer positioned over the surface.Surface PreparationThe Armor AR500 should be applied to a completely clean and dry surface. If the surface was cleaned with water or pressure washed prior to application, allow the surface to dry for at least 24 hours before sealing. While the surface may appear dry and feel dry to touch, water below the surface trapped in the pores can cause the same issues. While pressure washing the surface is typically sufficient, spot treatment may be necessary for deep or older stains.The Armor AR500 is designed specifically for use on unsealed concrete and concrete paver surfaces, as well as concrete and concrete pavers previously sealed with a solvent based acrylic. Do not apply this product over a surface previously sealed with a water based acrylic, or any other type of film-forming sealer. If the surface is smooth troweled, or does not easily accept water, acid etching may be required prior to applying sealer. It is always suggested to apply the Armor AR500 to a test area to verify absorption, coverage, compatibility, and project suitability.Note About Sealing Pavers:Please note, the Armor AR500 is not a bonding agent. Do not apply the Armor AR500 over loose sand between paver joints because it will not harden or seal the loose sand. The Armor AR500 can be applied over the pavers directly, or the pavers and polymeric sand (if the polymeric sand is newly installed, wait 7 days before sealing), but it can’t and should not be applied over loose sand.Mixing Color Packs: Do not exceed more than 6 ounces of color per gallon of sealer. Stir color well before adding to sealer, then once added to sealer, stir again, ensuring color is evenly mixed. When applying the AR500 in color, it will cover like a paint, completely opaque.Adding Non-Slip: For best results, apply the Armor non-slip additive with an appropriate hand-held broadcast spreader. When applying the second coat, add the non-slip additive to the coating using a broadcast spreader, and back roll to encapsulate the non-slip additive.For complete application instructions and safety data, please refer to the Technical Data or SDS Sheet.Coverage:Porous Surfaces: Up to 175 FT2/gallon in one coat.Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat.Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance.

Watco 65851 Danish Oil Wood Finish, Pint, Dark Walnut

Watco Pint Dark Walnut Danish Oil Finish. Watco Danish Oil Wood Finish stains, seals, and protects in one easy step to produce a warm, natural hand rubbed appearance. Oil-based formula of blended oil & varnish penetrates deeply into wood pores for ultimate protection.

1/2 Pt Minwax WOOD FINISH PENETRATING STAIN Semi-Transparent Oil-Based PCK COLOR

<img src=”HTTPS://ti2.auctiva.com/web/aswCredit.gif” border=”0″><br><a href=”HTTPS://ebaybusinessbuilder.com/listing-tools/#ebay-only-listing-tools” target=”_blank”><img src=”HTTPS://ti2.auctiva.com/images/sc1line1.gif” border=”0″></a>Minwax Wood Finish MinwaxWood FinishSemi-TransparentOil-Based Stain1/2 PintUse a Cloth or Brush to ApplyLow VOCAllow 6 hours Before RecoatingCovers 45 sq. ft.Cleanup with Mineral Spirits Minwax Wood Finish is a penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. It applies easily, absorbs deep into the pores of the wood and is ideal for staining unfinished wood furniture, cabinets, doors, trim, molding and hardwood floors. Finish every project with a clear protective topcoat like Minwax fast-dry polyurethane or Minwax Polycrylic protective finish. To darken color, recoat. Do not sand between coats. If happy with the color, let dry completely before applying a protective topcoat.Deeply penetrating color enhances wood’s beauty in one coatMakes it possible to stain in a dayResists lapping for even colorCan be used to add beauty to any bare or stripped wood surfaceStart with bare and stripped wood that’s clean and dryRemove sanding dustWipe away excess stain, working with wood grain to blend lighter and darker areas togetherTest before staining on a hidden spot to make sure you like the colorStir stain well before and occasionally during stainingDon’t shake or thin stain Available in 28 beautiful colors Choose color/colors from drop down menu above! Please email with any questions!We are a full size hardware store. If you have a hardware need and don’t see it or if need more than the quantity listed here at our online store, please contact us and we’ll try or best get it for you.Please note: The photo of the product is for reference only and not a photo of the actual item. The item you will receive will be factory sealed and may be packaged different. Terms and ConditionsPayment: PayPal payment is expected within 7 days of the end of auction. Michigan residents must by 6% sales tax as required by law.SHIPPING:Shipping Details: Please pay with PayPal for fastest delivery. All items ship via USPS, FedEx or UPS within 2-3 business days of receiving payment, however we are not responsible for transit time and delays.Please remember: Shipping & Handling is more than just postage. It includes the time, effort & materials associated with the preparation & arrangement of shipment. In order to save you money we combine shipping on orders with more than one item whenever possible. Please contact us with any questions.Return Policy: We accept return items for refund, credit, or exchange. A return must include all original items undamaged, in re-saleable condition, along with all original packaging including manuals, warranty forms, etc. Shipping and handling fees are not refundable. Buyer is responsible for shipping costs incurred shipping products back to us. Please contact us before shipping an item back.Thank You!! For all International buyers: You are responsible for all customs fees, we are not. Although it is not likely, your package may be delayed due to customs inspections. We just want you to be aware of this! Warning. Everything sold into the state of California contains agents known to the state of California to cause cancer and birth defects, reproductive harm, or other, as yet unnamed, harm to its citizenry. PLEASE BE AWARE THAT DELIVERY MAY TAKE LONGER THAN THE ESTIMATED ARRIVAL DATES, DUE TO THE PANDEMIC SHIPPING CARRIERS ARE EXPERIENCING DELAYS. gift

Klean-Strip Boiled Linseed Oil, 1 Quart

Apply athin coat with a cloth or brush. Reduces brush drag. 3️⃣ Smooth Paint Application. Wipe off excess oil. 2️⃣ Protects the Surface. Clean and dry the wood surface. Improvesflow and gloss. Let itpenetrate the wood.