Ultra Custom Pools

Item Tag: OOYCYOO

60A 80A MPPT Solar Panel Regulator Charge Controller 12V/24V MAX 2000W US1

60A 80A MPPT Solar Panel Regulator Charge Controller 12V/24V MAX 2000W US1 Buy multiple, discount√ Please contact us NOTE:Optional USB 5V charging Not suitable Apple iphone 5G 5 Package Included: 1. 1X MPPT solar charge controller 2. 1X User’s Manual 3. 1X Temp. Sensor 60A Solae reugulator Specifications: 60A Solar Panel Charge Controller Regulator 12V/24V Compatible with 1440W(24v) solar panel with dark activated function, Max current is 60A 60A Solar Panel Charge Controller 12V/24V + LCD display Compatible with MAX 1440W Solar Panel 12V/24V Auto Switch; Timer Intigrated (Lighting function) Controller Series controller has the following features: Solar LCD series a kind of intelligent, multipurpose solar charge and discharge controller 1, LCD screen display 2, Easy operation interface 3, PWM+MPPT charging mode 4, Parameter user can reset, 5, A key to open and close the load, 6, A key to restore the factory settings, 7, Battery reverse discharge protection, 8, Battery reverse polarity protection 9, Battery under voltage protection, 10, Overload, short-circuit protection, 11, Automatic temperature compensation function, 12, USB 5V charging (for 500mA) for mobile phone. SOLAR60 Datasheet: Output Voltage: 12V/24V Automatically distinguish voltage Rated working current:≤60A Solar panels voltage:≤48V Full Charge Cut:13.8V/27.6V Low Voltage Cut:10.7V/21.4V Temp ompensation:-4mv/℃/cell Zero Load Loses:≤25mA Low voltage recovery(settable):12.5V/25.0V Loop pressure drop: ≤160mV Installable maximum cable:(20mm2) Working temperature: -10℃~60℃ Storage temperature: -30℃~70℃ Temperature requirement: ≤90％,no condensation Dimension: 90 mm×188 mm×48 mm Mounting hole spacing: 60 mm×178 mm –Φ5 Weight: ≤800g Charging mode:PWM+MPPT mode Solar panel powe: 720W/12V 1440W/24V 80A Solae reugulator Specifications: 80A Solar Panel Charge Controller Regulator Solar panel 960W/12V 1920W/24V Compatible with 1920W(24v) solar panel with dark activated function, Max current is 80A 80A Solar Panel Charge Controller 12V/24V + LCD display Compatible with MAX 1920W Solar Panel 12V/24V Auto Switch; Timer Intigrated (Lighting function) SOLAR80 Series controller has the following features: Solar LCD series a kind of intelligent, multipurpose solar charge and discharge controller 1, LCD screen display 2, Easy operation interface 3, PWM+MPPT charging mode 4, Parameter user can reset, 5, A key to open and close the load, 6, A key to restore the factory settings, 7, Battery reverse discharge protection, 8, Battery reverse polarity protection 9, Battery under voltage protection, 10, Overload, short-circuit protection, 11, Automatic temperature compensation function, 12, USB 5V charging (for 500mA) for mobile phone. SOLAR80 Datasheet: Output Voltage: 12V/24V Automatically distinguish voltage Rated working current :≤80A Solar panels voltage:≤48V Full Charge Cut : 13.8V/27.6V Low Voltage Cut :10.7V/21.4V Temp ompensation: -4mv/℃/cell Zero Load Loses: ≤25mA Low voltage recovery(settable): 12.5V/25.0V Loop pressure drop: ≤160mV Installable maximum cable: (25mm2) Working temperature: -10℃~60℃ Storage temperature: -30℃~70℃ Temperature requirement: ≤90％,no condensation Dimension: 90 mm×188 mm×48 mm Mounting hole spacing: 60 mm×178 mm –Φ5 Weight: ≤1000g Charging mode: PWM+MPPT mode Buy multiple, discount√ Please contact us NOTE:Optional USB 5V charging Not suitable Apple iphone 5G 5 Package Included: 1. 1X MPPT solar charge controller 2. 1X User’s Manual 3. 1X Temp. Sensor 60A Solae reugulator Specifications: 60A Solar Panel Charge Controller Regulator 12V/24V Compatible with 1440W(24v) solar panel with dark activated function, Max current is 60A 60A Solar Panel Charge Controller 12V/24V + LCD display Compatible with MAX 1440W Solar Panel 12V/24V Auto Switch; Timer Intigrated (Lighting function) Controller Series controller has the following features: Solar LCD series a kind of intelligent, multipurpose solar charge and discharge controller 1, LCD screen display 2, Easy operation interface 3, PWM+MPPT charging mode 4, Parameter user can reset, 5, A key to open and close the load, 6, A key to restore the factory settings, 7, Battery reverse discharge protection, 8, Battery reverse polarity protection 9, Battery under voltage protection, 10, Overload, short-circuit protection, 11, Automatic temperature compensation function, 12, USB 5V charging (for 500mA) for mobile phone. SOLAR60 Datasheet: Output Voltage: 12V/24V Automatically distinguish voltage Rated working current:≤60A Solar panels voltage:≤48V Full Charge Cut:13.8V/27.6V Low Voltage Cut:10.7V/21.4V Temp ompensation:-4mv/℃/cell Zero Load Loses:≤25mA Low voltage recovery(settable):12.5V/25.0V Loop pressure drop: ≤160mV Installable maximum cable:(20mm2) Working temperature: -10℃~60℃ Storage temperature: -30℃~70℃ Temperature requirement: ≤90％,no condensation Dimension: 90 mm×188 mm×48 mm Mounting hole spacing: 60 mm×178 mm –Φ5 Weight: ≤800g Charging mode:PWM+MPPT mode Solar panel powe: 720W/12V 1440W/24V 80A Solae reugulator Specifications: 80A Solar Panel Charge Controller Regulator Solar panel 960W/12V 1920W/24V Compatible with 1920W(24v) solar panel with dark activated function, Max current is 80A 80A Solar Panel Charge Controller 12V/24V + LCD display Compatible with MAX 1920W Solar Panel 12V/24V Auto Switch; Timer Intigrated (Lighting function) SOLAR80 Series controller has the following features: Solar LCD series a kind of intelligent, multipurpose solar charge and discharge controller 1, LCD screen display 2, Easy operation interface 3, PWM+MPPT charging mode 4, Parameter user can reset, 5, A key to open and close the load, 6, A key to restore the factory settings, 7, Battery reverse discharge protection, 8, Battery reverse polarity protection 9, Battery under voltage protection, 10, Overload, short-circuit protection, 11, Automatic temperature compensation function, 12, USB 5V charging (for 500mA) for mobile phone. SOLAR80 Datasheet: Output Voltage: 12V/24V Automatically distinguish voltage Rated working current :≤80A Solar panels voltage:≤48V Full Charge Cut : 13.8V/27.6V Low Voltage Cut :10.7V/21.4V Temp ompensation: -4mv/℃/cell Zero Load Loses: ≤25mA Low voltage recovery(settable): 12.5V/25.0V Loop pressure drop: ≤160mV Installable maximum cable: (25mm2) Working temperature: -10℃~60℃ Storage temperature: -30℃~70℃ Temperature requirement: ≤90％,no condensation Dimension: 90 mm×188 mm×48 mm Mounting hole spacing: 60 mm×178 mm –Φ5 Weight: ≤1000g Charging mode: PWM+MPPT mode

2 IN 1 60A 80A MPPT Solar Panel Regulator Charge Controller 12V/24V MAX 2000W G1

Solar charge and discharge controller: X series of instructions A brief introduction to separate work parts 1: controller host work independently: work parameters for factory settings (original parameters), if you need to change the parameters, you need to connect the control panel (display board) 2: control board (display board), can be separated work, but can not work independently, the need to connect the host computer network controller, read the model, you can work normally. 3：The green and yellow indicator lights at the interface of the C: controller: the green light is always on, indicating that the system works normally, the green light flashes, indicating that the load is working, and the yellow light is always on, This means that the solar panel is connected, and the yellow light flashes, indicating that the charge is being charged. 4: control board (display board) separation work, transmission speed: 9600bit, the maximum support distance of 1000 meters The communication interface is the universal network interface; the host and the display board work separately, need the connection to be able to work normally;（Note that the native network interface is only suitable for the products of our company and is not compatible with other manufacturers’ products） Feature： 1.Maximum Power Current：80A 2.Installation lin（mm²）：20mm² 3.Installation line(AWG):2#(AWG) 4.Weight:≤900g 5.Peak Power of Solar Cell Panel（Max Wp）：≤1000W 6.Battery capacity configuration：≥800AH 7.Dismenisons：188*28*61（mm）—-Φ5 Timer Intigrated (Lighting function) 1, LCD screen display, 2, Easy operation interface, 3, PWM charging mode+MPPT, 4, Parameter user can reset, 5, A key to open and close the load, 6, A key to restore the factory settings, 7, Battery reverse discharge protection, 8, Battery reverse polarity protection 9, Battery under voltage protection, 10, Overload, short-circuit protection, 11, Automatic temperature compensation function, 12,Can charge and discharge at the same time, Always keep the battery in full status 13, USB 5V charge (current 2400mA/2.4A) Optional Package contents: 1* 80A MPPT Solar Controller 1* English User Manual 1* Temp Sensor [RETURN_POLICE] Solar charge and discharge controller: X series of instructions A brief introduction to separate work parts 1: controller host work independently: work parameters for factory settings (original parameters), if you need to change the parameters, you need to connect the control panel (display board) 2: control board (display board), can be separated work, but can not work independently, the need to connect the host computer network controller, read the model, you can work normally. 3：The green and yellow indicator lights at the interface of the C: controller: the green light is always on, indicating that the system works normally, the green light flashes, indicating that the load is working, and the yellow light is always on, This means that the solar panel is connected, and the yellow light flashes, indicating that the charge is being charged. 4: control board (display board) separation work, transmission speed: 9600bit, the maximum support distance of 1000 meters The communication interface is the universal network interface; the host and the display board work separately, need the connection to be able to work normally;（Note that the native network interface is only suitable for the products of our company and is not compatible with other manufacturers’ products） Feature： 1.Maximum Power Current：80A 2.Installation lin（mm²）：20mm² 3.Installation line(AWG):2#(AWG) 4.Weight:≤900g 5.Peak Power of Solar Cell Panel（Max Wp）：≤1000W 6.Battery capacity configuration：≥800AH 7.Dismenisons：188*28*61（mm）—-Φ5 Timer Intigrated (Lighting function) 1, LCD screen display, 2, Easy operation interface, 3, PWM charging mode+MPPT, 4, Parameter user can reset, 5, A key to open and close the load, 6, A key to restore the factory settings, 7, Battery reverse discharge protection, 8, Battery reverse polarity protection 9, Battery under voltage protection, 10, Overload, short-circuit protection, 11, Automatic temperature compensation function, 12,Can charge and discharge at the same time, Always keep the battery in full status 13, USB 5V charge (current 2400mA/2.4A) Optional Package contents: 1* 80A MPPT Solar Controller 1* English User Manual 1* Temp Sensor

100A 80A 60A-20A MPPT Solar Panel Regulator Charge Controller 12V/24V PV 100V N2

MPPT 100A 80A 60A 40A 30A 20A 12V 24V solar charge controller for maximum 100V solar panel input with two USB 5V output solar controller MPPT K100A: 12V system : Open circuit voltage≤48V（Voc) Max .PV input Power:1200W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:2400W MPPT K80A 12V system : Open circuit voltage≤48V（Voc) Max .PV input Power:1000W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:2000W MPPT P60A 12V system : Open circuit voltage≤48V（Voc) Max .PV input Power:750W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:1500W MPPT K40A 12V system : Open circuit voltage≤48V（Voc) Max .PV input Power:500W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:1000W MPPT K30A 12V system : Open circuit voltage≤48V（Voc) Max .PV input Power:400W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:800W MPPT K20A 12V system : Open circuit voltage≤48V（Voc) Max .PV input Power:300W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:600W Overview: MPPT series solar charge controller is based on an advanced maximum power point tracking (MPPT) technology developed, dedicated to the solar system, the charge controller conversion efficiency up to 98%. This series MPPT have such advantages: All the Various Real-time data show on one display ,Convenient user to check The Solar Panel input voltage up to 100V, suitable for various specifications of solar panel The power supply uses ultra low power chip ,reducing static standby power consumption ,reduce energy loss Dual USB 5V Output for phone charging Support Remote Display Feature: Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%. High quality components, perfecting system performance, with maximum conversion efficiency of 98%. Ultra-fast tracking speed and guaranteed tracking efficiency. Wide MPP operating voltage range. 12/24VDC automatically identifying system voltage. LCD panel display design, dynamically displaying tool‟s operating data and working condition. Support 3 charging lead-acid battery options: Sealed, Gel, Flooded. Charge mode: three stages (constant current, constant voltage, floating charge), it prolongs service life of the batteries. Battery temperature compensation function. Multiple load work modes This solar charge controller with three time function. A: time (night working) B: period (pause) C: time slot (dawn working) Package Including: 1PCS MPPT Solar Controllers 1PCS User Manual (English) 1PCS Temperature Sensor Function: “P” series of an intelligent, multi-purpose solar charge controller LCD screen display Battery reverse discharge protection Simple (and more time control) operation Battery reverse polarity protection MPPT charging mode Battery under voltage protection Parameter user can reset Overload, short-circuit protection A key to open and close the load Automatic temperature compensation function A key to restore the factory settings USB5V charge 2.4A LCD Operating interface description : Network Line Interface (RS485) Indicator: Green light represents the battery, green light flashes, indicating that the load is working properly; yellow light indicates solar energy; yellow light flashes, indicating solar energy charging; Parameter Table: Model MPPT P40 MPPT P60 Maximum power current 40A 60A Battery Votlage 12V 24V Auto Battery float voltage 13.8V(12V system)/27.6V(24V system) Battery (under voltage) protection 10.6V(12V system)/21.2V(24V system) Battery (under voltage) recovery voltage 12.6V(12V system)/25.2V(24V system) Solar Panel Maximum open circuit voltage(Voc) ≤48V（Voc）12V system ; ≤96V（Voc）24V system Maximum open circuit voltage of the solar panel (Voc) 18V-48V(12V system) / 36V-96V(24V system) Maximum PV input power 520W(12V system) 1040W(24V system) 750W(12V system) 1500W(24V system) System load loss ≤13mA Loop Buck ≤100mV Operating Temperature -10°C~60°C Storeage Temperature -30°C~70°C Humidity requirements ≤90%, No condensation Temperature compensation -4mV/Cell/°C Installaton Lin(mm2) 8mm2 10mm2 Installaton Line(AWG) 10(AWG) 10(AWG) Batery capacity configuration ≥300AH ≥400AH Photo:

100A 80A 60A 40A MPPT Solar Charge Controller 12V 24V 36V 48V Auto PV Max 160V B

MPPT 100A 12V 24V 36V 48V PV MAX 160V 12V system : Open circuit voltage≤96V（Voc) Max .PV input Power:1300W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:2600W 36V system: Open circuit voltage≤144V（Voc) Max .PV input Power:3800W 48V system: Open circuit voltage≤144V（Voc) Max .PV input Power:5000W MPPT 80A 12V 24V 36V 48V PV MAX 160V 12V system : Open circuit voltage≤96V（Voc) Max .PV input Power:1000W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:2000W 36V system: Open circuit voltage≤144V（Voc) Max .PV input Power:3000W 48V system: Open circuit voltage≤144V（Voc) Max .PV input Power:4000W MPPT 60A 12V 24V 36V 48V PV MAX 160V 12V system : Open circuit voltage≤96V（Voc) Max .PV input Power:750W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:1500W 36V system: Open circuit voltage≤144V（Voc) Max .PV input Power:2250W 48V system: Open circuit voltage≤144V（Voc) Max .PV input Power:3000W MPPT 40A 12V 24V 36V 48V PV MAX 160V 12V system : Open circuit voltage≤96V（Voc) Max .PV input Power:500W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:1000W 36V system: Open circuit voltage≤144V（Voc) Max .PV input Power:1500W 48V system: Open circuit voltage≤144V（Voc) Max .PV input Power:2000W Overview OOYCYOO 100Amps MPPT solar charge controller is based on an advanced maximum power point tracking(MPPT) technology developed, dedicated to the solar system, the charge controller conversion efficiency up to 99%. Features MPPT 100A solar charge controller 100% MPPT technology 0 Layer, easy installation, easy setup Built-in DSP controller with high performance Automatic switch for 12V/24V/36V/48V battery bank 3-stage charging optimizes battery performance Overcharge protection, Input PV polarity reverse protection, Output limited current protection, Over-temperature protection Troubleshooting promotion function. Suitable for battery types such as sealed lead acid, vented gel, and lithium battery, etc Easy to be mounted Datasheet Technical Specification for Selection Guide Models 100A 12V 24V 36V 48V Charging mode MPPT Maximum power point tracking automatically Charging 3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge System type DC12V/24V/36V/48V Recognition automatically System voltage automatic recognition 1 2V system (DC9V-DC15V) 24V system (DC18V-DC29V) 36V system (DC30V-DC39V) 48V system (DC40V〜DC60V) Soft start time 98.1 % (Voc is 1.5 or 2 times than battery, then it’s the best efficiency) PV utilization >99% Input specification VOC from PV( Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 or 2 times than battery, then it’s the best efficiency.) 12V system (DC20V〜DC96V) 24V system (DC37V-DC96V) 36V system (DC50V〜DC144V) 48V system (DC72V〜DC144V) The maximum PV input voltage (Voc) DC190V(The controller can’t work at this voltage of long duration that will break controller. Please refer to the Input voltage from PV.) The maximum PV input power (The total power rated of PV can’t be over this watt that will break the controller.) 12V system (1300W) 24V system (2600W) 36V system (3800W) 48V system (5000W) Output specification Selectable battery type(default is Sealed) Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user) Absorption Charging Voltage Refer to Batteries charging reference Floating Charging Voltage Refer to Batteries charging reference Overcharging protection voltage 12V system (15V) 24V system (30V) 36V system (45V) 48V system (60V) Rated output current 100A Temperature Coefficient ±0.02%/ °C Automatic temperature compensation 14.2V-(Max temperature-25 °C)*0.3 Output voltage ripple-peak 100mv Output voltage accuracy 40 °C Fan-off temperature <35 °C Acoustic noise Low voltage reconnect > Low voltage discharge. The solar controller will stop output when the battery under 10.7V. The LCD will be blank when the battery under 8V and it will re-output when the battery up to the 12.6V (adjustable). Install the Charger controller to the battery as close as possible. Tighten the wire, Carefully read battery manuals before operation. Do NOT let the positive (+) and negative (-) terminals of the battery touch each other. Overview OOYCYOO 60Amps MPPT solar charge controller is based on an advanced maximum power point tracking(MPPT) technology developed, dedicated to the solar system, the charge controller conversion efficiency up to 99%. Features MPPT 60A solar charge controller 100% MPPT technology Support charging battery options: Sealed, Gel, Flooded, lead-acid ,AGM ,Lithium ,Lifepo4 0 Layer, easy installation, easy setup Built-in DSP controller with high performance Automatic switch for 12V/24V/36V/48V battery bank 3-stage charging optimizes battery performance Overcharge protection, Input PV polarity reverse protection, Output limited current protection, Over-temperature protection Troubleshooting promotion function. Suitable for battery types such as sealed lead acid, vented gel, and lithium battery, etc Easy to be mounted Datasheet Technical Specification for Selection Guide Models 60A 12V 24V 36V 48V Charging mode MPPT Maximum power point tracking automatically Charging 3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge System type DC12V/24V/36V/48V Recognition automatically System voltage automatic recognition 1 2V system (DC9V-DC15V) 24V system (DC18V-DC29V) 36V system (DC30V-DC39V) 48V system (DC40V〜DC60V) Soft start time 98.1 % (Voc is 1.5 or 2 times than battery, then it’s the best efficiency) PV utilization >99% Input specification VOC from PV( Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 or 2 times than battery, then it’s the best efficiency.) 12V system (DC18V〜DC72V) 24V system (DC36V-DC108V) 36V system (DC50V〜DC144V) 48V system (DC72V〜DC160V) The maximum PV input voltage (Voc) DC180V(The controller can’t work at this voltage of long duration that will break controller. Please refer to the Input voltage from PV.) The maximum PV input power (The total power rated of PV can’t be over this watt that will break the controller.) 12V system (720W) 24V system (1440W) 36V system (2100W) 48V system (2800W) Output specification Selectable battery type(default is Sealed) Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user) Absorption Charging Voltage Refer to Batteries charging reference Floating Charging Voltage Refer to Batteries charging reference Overcharging protection voltage 12V system (15V) 24V system (30V) 36V system (45V) 48V system (60V) Rated output current 60A Temperature Coefficient ±0.02%/ °C Automatic temperature compensation 14.2V-(Max temperature-25 °C)*0.3 Output voltage ripple-peak 100mv Output voltage accuracy 40 °C Fan-off temperature <35 °C Acoustic noise <40dB Cooling way Forced air cooling Components Imported materials, Accord to EU standards, Industrial grade range. Environmental requirements Meet 2002/95/EC; No cadmium, hydrides, and fluorides Security Level Accord to CE, PSE, FCC, EMC, EN60950 Electromagnetic Compatibility Accord to EN6W00, EN55022, EN55024 Enclosure IP21 Net weight(Kg) 1.8 Package Includes 1 x MPPT Solar Charge Controller 1 x English User Manua

2 IN 1 60A MPPT Solar Panel Regulator Charge Controller 12V/24V 750W/1500W G1

Solar charge and discharge controller: X series of instructions A brief introduction to separate work parts 1: controller host work independently: work parameters for factory settings (original parameters), if you need to change the parameters, you need to connect the control panel (display board) 2: control board (display board), can be separated work, but can not work independently, the need to connect the host computer network controller, read the model, you can work normally. 3：The green and yellow indicator lights at the interface of the C: controller: the green light is always on, indicating that the system works normally, the green light flashes, indicating that the load is working, and the yellow light is always on, This means that the solar panel is connected, and the yellow light flashes, indicating that the charge is being charged. 4: control board (display board) separation work, transmission speed: 9600bit, the maximum support distance of 1000 meters The communication interface is the universal network interface; the host and the display board work separately, need the connection to be able to work normally;（Note that the native network interface is only suitable for the products of our company and is not compatible with other manufacturers’ products） Feature： 1.Maximum Power Current：60A 2.Installation lin（mm²）：20mm² 3.Installation line(AWG):2#(AWG) 4.Weight:≤900g 5.Peak Power of Solar Cell Panel（Max Wp）：≤750W 6.Battery capacity configuration：≥800AH 7.Dismenisons：188*28*61（mm）—-Φ5 Timer Intigrated (Lighting function) 1, LCD screen display, 2, Easy operation interface, 3, PWM charging mode+MPPT, 4, Parameter user can reset, 5, A key to open and close the load, 6, A key to restore the factory settings, 7, Battery reverse discharge protection, 8, Battery reverse polarity protection 9, Battery under voltage protection, 10, Overload, short-circuit protection, 11, Automatic temperature compensation function, 12,Can charge and discharge at the same time, Always keep the battery in full status 13, USB 5V charge (current 2400mA/2.4A) Optional Package contents: 1* 60A MPPT Solar Controller 1* English User Manual 1* Temp Sensor

100A MPPT Solar Charge Controller Battery Regulator Charger 12V/24V PV 100V M1

100A MPPT Solar Charge Controller Battery Regulator Charger 12/24V PV 100V MPPT K100A 12V system : Open circuit voltage≤48V（Voc) Max .PV input Power:1300W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:2600W Overview: MPPT series solar charge controller is based on an advanced maximum power point tracking (MPPT) technology developed, dedicated to the solar system, the charge controller conversion efficiency up to 98%. This series MPPT have such advantages: All the Various Real-time data show on one display ,Convenient user to check The Solar Panel input voltage up to 100V, suitable for various specifications of solar panel The power supply uses ultra low power chip ,reducing static standby power consumption ,reduce energy loss Dual USB 5V Output for phone charging Support Remote Display Feature: Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%. High quality components, perfecting system performance, with maximum conversion efficiency of 98%. Ultra-fast tracking speed and guaranteed tracking efficiency. Wide MPP operating voltage range. 12/24VDC automatically identifying system voltage. LCD panel display design, dynamically displaying tool‟s operating data and working condition. Support 3 charging lead-acid battery options: Sealed, Gel, Flooded. Charge mode: three stages (constant current, constant voltage, floating charge), it prolongs service life of the batteries. Battery temperature compensation function. Multiple load work modes This solar charge controller with three time function. A: time (night working) B: period (pause) C: time slot (dawn working) Package Including: 1PCS MPPT Solar Controllers 1PCS User Manual (English) 1PCS Temperature Sensor Function: “P” series of an intelligent, multi-purpose solar charge controller LCD screen display Battery reverse discharge protection Simple (and more time control) operation Battery reverse polarity protection MPPT charging mode Battery under voltage protection Parameter user can reset Overload, short-circuit protection A key to open and close the load Automatic temperature compensation function A key to restore the factory settings USB5V charge 2.4A LCD Operating interface description : Network Line Interface (RS485) Indicator: Green light represents the battery, green light flashes, indicating that the load is working properly; yellow light indicates solar energy; yellow light flashes, indicating solar energy charging; Parameter Table: Model MPPT K100A MPPT P60 Maximum power current 100A 60A Battery Votlage 12V 24V Auto Battery float voltage 13.8V(12V system)/27.6V(24V system) Battery (under voltage) protection 10.6V(12V system)/21.2V(24V system) Battery (under voltage) recovery voltage 12.6V(12V system)/25.2V(24V system) Solar Panel Maximum open circuit voltage(Voc) ≤48V（Voc）12V system ; ≤96V（Voc）24V system Maximum open circuit voltage of the solar panel (Voc) 18V-48V(12V system) / 36V-96V(24V system) Maximum PV input power 1300W(12V system) 2600W(24V system) 750W(12V system) 1500W(24V system) System load loss ≤13mA Loop Buck ≤100mV Operating Temperature -10°C~60°C Storeage Temperature -30°C~70°C Humidity requirements ≤90%, No condensation Temperature compensation -4mV/Cell/°C Installaton Lin(mm2) 10mm2 8mm2 Installaton Line(AWG) 10(AWG) 10(AWG) Batery capacity configuration ≥400AH ≥300AH

100A 60A MPPT Solar Charge Controller 12V 24V 48V Auto PV 150V MAX 5000W D1

After the product has been used, it was returned without checking whether the function is complete. Please pay attention to this when purchasing. If it cannot be used, please contact me for a refund or exchange for Lead-Acid Sealed Gel AGM Flooded Lithium Lifepo4 MPPT 100A 12V 24V 36V 48V PV 150V 12V system : Open circuit voltage≤96V（Voc) Max .PV input Power:1300W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:2600W 36V system: Open circuit voltage≤144V（Voc) Max .PV input Power:3800W 48V system: Open circuit voltage≤144V（Voc) Max .PV input Power:5000W MPPT 100A 12V 24V: 12V system : Open circuit voltage≤96V（Voc) Max .PV input Power:1200W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:2400W MPPT 60A 12V system : Open circuit voltage≤96V（Voc) Max .PV input Power:750W 24V system: Open circuit voltage≤96V（Voc) Max .PV input Power:1500W Overview OOYCYOO 100Amps MPPT solar charge controller is based on an advanced maximum power point tracking(MPPT) technology developed, dedicated to the solar system, the charge controller conversion efficiency up to 99%. Features MPPT 100A solar charge controller 100% MPPT technology 0 Layer, easy installation, easy setup Built-in DSP controller with high performance Automatic switch for 12V/24V/36V/48V battery bank 3-stage charging optimizes battery performance Overcharge protection, Input PV polarity reverse protection, Output limited current protection, Over-temperature protection Troubleshooting promotion function. Suitable for battery types such as sealed lead acid, vented gel, and lithium battery, etc Easy to be mounted Datasheet Technical Specification for Selection Guide Models 100A 12V 24V 36V 48V Charging mode MPPT Maximum power point tracking automatically Charging 3-stage:constant current(MPPT), constant voltage(Absorption Voltage), floating charge System type DC12V/24V/36V/48V Recognition automatically System voltage automatic recognition 1 2V system (DC9V-DC15V) 24V system (DC18V-DC29V) 36V system (DC30V-DC39V) 48V system (DC40V〜DC60V) Soft start time 98.1 % (Voc is 1.5 or 2 times than battery, then it’s the best efficiency) PV utilization >99% Input specification VOC from PV( Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 or 2 times than battery, then it’s the best efficiency.) 12V system (DC20V〜DC96V) 24V system (DC37V-DC96V) 36V system (DC50V〜DC144V) 48V system (DC72V〜DC144V) The maximum PV input voltage (Voc) DC190V(The controller can’t work at this voltage of long duration that will break controller. Please refer to the Input voltage from PV.) The maximum PV input power (The total power rated of PV can’t be over this watt that will break the controller.) 12V system (1300W) 24V system (2600W) 36V system (3800W) 48V system (5000W) Output specification Selectable battery type(default is Sealed) Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user) Absorption Charging Voltage Refer to Batteries charging reference Floating Charging Voltage Refer to Batteries charging reference Overcharging protection voltage 12V system (15V) 24V system (30V) 36V system (45V) 48V system (60V) Rated output current 100A Temperature Coefficient ±0.02%/ °C Automatic temperature compensation 14.2V-(Max temperature-25 °C)*0.3 Output voltage ripple-peak 100mv Output voltage accuracy 40 °C Fan-off temperature <35 °C Acoustic noise <40dB Cooling way Forced air cooling Components Imported materials, Accord to EU standards, Industrial grade range. Environmental requirements Meet 2002/95/EC; No cadmium, hydrides, and fluorides Security Level Accord to CE, PSE, FCC, EMC, EN60950 Electromagnetic Compatibility Accord to EN6W00, EN55022, EN55024 Enclosure IP21 Net weight(Kg) 3.8 Gross weight(Kg) 4.0 Package Includes 1 x MPPT Solar Charge Controller 1 x English User Manua