1/2″ Sharkbite Style PUSH FIT Tee Lead Free Brass – PEX GUY
PEX GUY 1/2″ Push-Fit TeeQuality Push-Fit Tee These PEX GUY 1/2″ Push-Fit Tee can be used as a connection between three lines of 1/2″ PEX piping, Copper piping, or CPVC in any combination. Install and uninstall in minutes without any additional installation tool or crimpers. Push-Fit technology used for these fittings allows you to insert your piping into both ends and have the stainless steel teeth bite down on your piping for a secured connection and seal. Since these Push-Fit tee are Lead-Free, they are suitable for a variety of applications from domestic drinking water to radiant heating.Specifications:NSF Certified to NSF 14 and NSF/ANSI 61Holds ASSE 1061 CertificationMade of Lead Free materialsApproved for use in underground and behind-the-wall applicationsCan be rotated after piping is installedFittings are reusable when using a Disconnect Clip to remove the piping from the fittingCompatible with any brand of PEX manufactured to North American standardManufactured to ASTM Standard F1807 and CSA B137.5 for use with any SDR-9 PEX tubeDo Not use with PB tubeCompatible with: PEX-A, PEX-B, and PEX-CNOT Compatible with: Expander Fitting System, Uponor/Wirsbo Expander SystemIncludes:PEX GUY 1/2″ Push-Fit Tee
1/2″ Sharkbite Style PUSH FIT BALL VALVE Lead Free – PEX GUY
PEX GUY 1/2″ Push-Fit Ball ValveQuality Push-Fit Ball VavleThese PEX GUY 1/2″ Push-Fit Ball Valve can be used as a connection between two pieces of 1/2″ PEX piping, Copper piping, or CPVC in any combination. Install and uninstall in minutes without any additional installation tool or crimpers. Push-Fit technology used for these fittings allows you to insert your piping into both ends and have the stainless steel teeth bite down on your piping for a secured connection and seal. Since these Push-Fit couplers are Lead-Free, they are suitable for a variety of applications from domestic drinking water to radiant heating.Specifications:NSF Certified to NSF 14 and NSF/ANSI 61Holds ASSE 1061 CertificationMade of Lead Free materialsApproved for use in underground and behind-the-wall applicationsCan be rotated after piping is installedFittings are reusable when using a Disconnect Clip to remove the piping from the fittingCompatible with any brand of PEX manufactured to North American standardManufactured to ASTM Standard F1807 and CSA B137.5 for use with any SDR-9 PEX tubeDo Not use with PB tubeCompatible with: PEX-A, PEX-B, and PEX-CNOT Compatible with: Expander Fitting System, Uponor/Wirsbo Expander SystemIncludes:PEX GUY 1/2″ Push-Fit Ball Valve
3/4″ PEX Brass Ball Valve w/ Drain Shut Off Valve Crimp Lead Free PEX GUY
These PEX GUY 3/4″ PEX Brass Ball Valve w/Drain can be used as a shut off or anywhere in your system that you would potentially like to turn off water flow to. With this valve you are to drain your system without removing the valve.
1″ PEX Brass Ball Valve w/ Drain Shut Off Valve Crimp Lead Free PEX GUY
PEX GUY 1″ PEX Brass Ball Valve w/DrainQuality Brass Ball ValvesThese PEX GUY 1″ PEX Brass Ball Valve w/Drain can be used as a shut off or anywhere in your system that you would potentially like to turn off water flow to. With this valve you are to drain your system without removing the valve. Since these ball valves are made from Lead-Free brass, they are suitable for a variety of applications from domestic drinking water to radiant heating.Specifications:NSF CertifiedMade of Forged BrassManufactured to North American StandardManufactured to ASTM Standard F1807 and CSA B137.5 for use with any SDR-9 PEX tubeManufactured at ISO 9001 Do Not use with PB tube200 psi Max200 F Max600 WOGCompatible with: PEX-A, PEX-B, and PEX-CNOT Compatible with: Expander Fitting System, Uponor/Wirsbo Expander SystemIncludes:PEX GUY 1″ PEX Brass Ball Valve w/Drain
3/4″ PEX x 3/4″ PEX Brass Ball Valve Lead Free Shut Off Crimp AB1953
PEX GUY 3/4″ PEX Brass Ball ValveQuality Brass Ball ValvesThese PEX GUY 3/4″ PEX Brass Ball Valves can be used as a shut off or anywhere in your system that you would potentially like to turn off water flow to. Since these ball valves are made from Lead-Free brass, they are suitable for a variety of applications from domestic drinking water to radiant heating.Specifications:NSF CertifiedMade of Forged BrassManufactured to North American StandardManufactured to ASTM Standard F1807 and CSA B137.5 for use with any SDR-9 PEX tubeManufactured at ISO 9001 Do Not use with PB tube200 psi Max200 F Max600 WOGCompatible with: PEX-A, PEX-B, and PEX-CNOT Compatible with: Expander Fitting System, Uponor/Wirsbo Expander SystemIncludes:PEX GUY 3/4″ PEX Brass Ball Valve
1 x 3/4 x 3/4″ Tee LEAD FREE Brass Crimp Cinch PEX Fittings No Lead Compliant
These PEX GUY 1 x 3/4″ x 3/4″ PEX Brass Crimp Tee can be used as a connection between one piece of 1″ PEX piping and two pieces of 3/4″ PEX piping. PEX GUY 1″ x 3/4″ x 3/4″ PEX Brass Tee. PEX GUY 1″ x 3/4″ x 3/4″ PEX Lead Free Brass Crimp Tee.
3/4 x 1/2 x 1/2″ Tee LEAD FREE Brass Crimp Cinch PEX Fittings No Lead Compliant
PEX GUY 3/4″ x 1/2″ x 1/2″ PEX Brass TeeQuality Brass Tee (Side x Side x Middle)These PEX GUY 3/4″ x 1/2″ x 1/2″ PEX Brass Crimp Tee can be used as a connection between one piece of 3/4″ PEX piping and two pieces of 1/2″ PEX piping. Since these brass tees are made from Lead-Free brass, they are suitable for a variety of applications from domestic drinking water to radiant heating.Specifications:NSF CertifiedMade of Lead Free Forged BrassCompatible with any brand of PEX manufactured to North American standardManufactured to ASTM Standard F1807 and CSA B137.5 for use with any SDR-9 PEX tubeDo Not use with PB tubeCompatible with: PEX-A, PEX-B, and PEX-CNOT Compatible with: Expander Fitting System, Uponor/Wirsbo Expander System(1/2 x 1/2 x 1/2″) configuration is represented as (Left x Right x Middle)Includes:PEX GUY 3/4″ x 1/2″ x 1/2″ PEX Lead Free Brass Crimp Tee