Air Injection Iron Fleck Filter Great at Removing Iron Manganese, H2S Whole Home
Performa_Softeners Please contact our experienced and professional staff with questions. They are eager to help!!! Air Injection Iron Water Filter The Almond Series Iron Air Injection Oxidizing Filter System, as a single tank system, is an efficient and cost effective system for the removal of iron and sulphur. The Iron filter maintains an “air pocket” in the top of the tank while the system is in service. As the water passes thru the air pocket, iron and sulphur are oxidized. A additionally, dissolved oxygen is added to the water. The Filter ag filter media bed then removes the iron and sulphur from the water. The Almond Series Iron Filter can remove up to 3 ppm Hydrogen Sulfide and up to 12 ppm Iron. A daily backwash will remove accumulated iron and replenish the filter media bed. The regeneration process also adds a fresh air pocket to the system. The Almond Series system comes equipped with a HD Duraline air injection control head that automatically back washes the system daily to clean the media and flush everything down the drain. The Almond Series is able to put the whole oxidation process inside one tank, keeping maintenance costs and down time to a minimum. The systems include by-pass valve, Structural mineral tank and all necessary media and support bed for individual application. This complete IRON Almond Series Well Water Iron Filter comes with: Media Filter Ag Based media Great For Well Water With Iron & Rotten Egg Smell Ships Loaded for easier installation 10×54″ mineral tank 1″ Stainless Steel Bypass System dimensions 12x15x62″ HD Digital control valve 5 years warranty on valve and 10 year warranty on tanks
Fleck 9100 SXT Metered 24k Twin Alternating Water Softener 24/7 Soft Water
Fleck 9100 SXT Metered 24k Twin Alternating Water Softener 24/7 Soft WaterDESCRIPTION**Ships Loaded with the Resin in the Tank** NEW Fleck 9100SXT Water Softener with Free Shipping! AVAILABLE M-F DURING INSTALLATION AND PROGRAMMING!!! We look forward to helping our customers. Thanks Doug Aplus Water LLC We have warehouses in Ohio, Florida and Arizona to expedite shipping times!!! Never lose programming during power outage!!! Series 9100 Twin-Alternating Conditioners • Light Commercial/Heavy Residential WORKS GREAT FOR: • Car Washes • Club Houses• Factories • Laundromats• Large Homes • Office Buildings • Restaurants Twin tanks provide continuous soft water. With a twin-tank system featuring the new Fleck 9100 valve, customers benefit from soft water 24 hours a day, seven days a week. That’s because the second tank of soft water acts as a backup, ready to immediately provide soft water once 100% of the first tank is used. While the second tank is in service, the first tank regenerates, giving you all the advantages of continuous soft water. The 9100SXT valve has been engineered and tested to withstand the equivalent of 27 years of uninterrupted daily use. 15% savings in both water and salt. Unlike preset systems, the twin-tank system regenerates with soft water only when necessary. Plus it uses 100% of the tank in service. The end result? Fifteen percent savings in both water and salt.** ** Compared to a system with meter delayed regeneration and the reserve set at 30% of the system capacity, provided that half of the reserve capacity is unused. Only pennies per day to operate. How the Twin-Tank Softener works. Water Softening Process Hard water enters the tank in service, and fills it. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it’s soft. Regeneration Process When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh, soft water backwashes all the brine water out, leaving the tank ready for service. FLECK 9100SXT TWIN ALTERNATING METERED WATER SOFTENER 48,000 GRAIN CAPACITY PER TANK Complete water softener comes with : 1.5 CUBIC FEET OF RESIN, 24,000 GRAIN CAPACITY PER TANK (TOTAL OF 48,000 GRAINS), FLECK 9100SXT CONTROLLER, TWO MINERAL TANKS, Salt Tank, BYPASS, COMPLETE SYSTEM 50X18X62 inches, 3/4 inch or 1 inch connections, (14x14x36) BRINE TANK w/safety float, AVAILABLE IN BLUE, BLACK OR ALMOND You can select options in the comment section during checkout or by email or phone prior or immediately after the sale. 3/4 inch bypass is the default if not specified by the customer and blue tanks is the default if not specified by the customer. Copyright © Aplus Water LLC 2020 Notice: consumer is responsible for following any state and/or local regulations and plumbing codes pertinent to the purchase, installation and operation of our products.See our other items**Ships Loaded with the Resin in the Tank** NEW Fleck 9100SXT Water Softener with Free Shipping! AVAILABLE M-F DURING INSTALLATION AND PROGRAMMING!!! We look forward to helping our customers. Thanks Doug Aplus Water LLC We have warehouses in Ohio, Florida and Arizona to expedite shipping times!!! Never lose programming during power outage!!! Series 9100 Twin-Alternating Conditioners • Light Commercial/Heavy Residential WORKS GREAT FOR: • Car Washes • Club Houses• Factories • Laundromats• Large Homes • Office Buildings • Restaurants Twin tanks provide continuous soft water. With a twin-tank system featuring the new Fleck 9100 valve, customers benefit from soft water 24 hours a day, seven days a week. That’s because the second tank of soft water acts as a backup, ready to immediately provide soft water once 100% of the first tank is used. While the second tank is in service, the first tank regenerates, giving you all the advantages of continuous soft water. The 9100SXT valve has been engineered and tested to withstand the equivalent of 27 years of uninterrupted daily use. 15% savings in both water and salt. Unlike preset systems, the twin-tank system regenerates with soft water only when necessary. Plus it uses 100% of the tank in service. The end result? Fifteen percent savings in both water and salt.** ** Compared to a system with meter delayed regeneration and the reserve set at 30% of the system capacity, provided that half of the reserve capacity is unused. Only pennies per day to operate. How the Twin-Tank Softener works. Water Softening Process Hard water enters the tank in service, and fills it. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it’s soft. Regeneration Process When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh, soft water backwashes all the brine water out, leaving the tank ready for service. FLECK 9100SXT TWIN ALTERNATING METERED WATER SOFTENER 48,000 GRAIN CAPACITY PER TANK — Complete water softener comes with : — 1.5 CUBIC FEET OF RESIN, — 24,000 GRAIN CAPACITY PER TANK (TOTAL OF 48,000 GRAINS), — FLECK 9100SXT CONTROLLER, — TWO MINERAL TANKS, — Salt Tank, BYPASS, — COMPLETE SYSTEM 50X18X62 inches, — 3/4 inch or 1 inch connections, — (14x14x36) BRINE TANK w/safety float, — AVAILABLE IN BLUE, BLACK OR ALMOND — You can select options in the comment section during checkout or by email or phone prior or immediately after the sale. 3/4 inch bypass is the default if not specified by the customer and blue tanks is the default if not specified by the customer. Fleck 9100 SXT Metered 24k Twin Alternating Water Softener 24/7 Soft Water**Ships Loaded with the Resin in the Tank** NEW Fleck 9100SXT Water Softener with Free Shipping! AVAILABLE M-F DURING INSTALLATION AND PROGRAMMING!!! We look forward to helping our customers. Thanks Doug Aplus Water LLC We have warehouses in Ohio, Florida and Arizona to expedite shipping times!!! Never lose programming during power outage!!! Series 9100 Twin-Alternating Conditioners • Light Commercial/Heavy Residential WORKS GREAT FOR: • Car Washes • Club Houses• Factories • Laundromats• Large Homes • Office Buildings • Restaurants Twin tanks provide continuous soft water. With a twin-tank system featuring the new Fleck 9100 valve, customers benefit from soft water 24 hours a day, seven days a week. That’s because the second tank of soft water acts as a backup, ready to immediately provide soft water once 100% of the first tank is used. While the second tank is in service, the first tank regenerates, giving you all the advantages of continuous soft water. The 9100SXT valve has been engineered and tested to withstand the equivalent of 27 years of uninterrupted daily use. 15% savings in both water and salt. Unlike preset systems, the twin-tank system regenerates with soft water only when necessary. Plus it uses 100% of the tank in service. The end result? Fifteen percent savings in both water and salt.** ** Compared to a system with meter delayed regeneration and the reserve set at 30% of the system capacity, provided that half of the reserve capacity is unused. Only pennies per day to operate. How the Twin-Tank Softener works. Water Softening Process Hard water enters the tank in service, and fills it. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it’s soft. Regeneration Process When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh, soft water backwashes all the brine water out, leaving the tank ready for service. FLECK 9100SXT TWIN ALTERNATING METERED WATER SOFTENER 48,000 GRAIN CAPACITY PER TANK Complete water softener comes with : 1.5 CUBIC FEET OF RESIN, 24,000 GRAIN CAPACITY PER TANK (TOTAL OF 48,000 GRAINS), FLECK 9100SXT CONTROLLER, TWO MINERAL TANKS, Salt Tank, BYPASS, COMPLETE SYSTEM 50X18X62 inches, 3/4 inch or 1 inch connections, (14x14x36) BRINE TANK w/safety float, AVAILABLE IN BLUE, BLACK OR ALMOND You can select options in the comment section during checkout or by email or phone prior or immediately after the sale. 3/4 inch bypass is the default if not specified by the customer and blue tanks is the default if not specified by the customer. See our other itemsDESCRIPTION Copyright © Aplus Water LLC 2020 Notice: consumer is responsible for following any state and/or local regulations and plumbing codes pertinent to the purchase, installation and operation of our products.**Ships Loaded with the Resin in the Tank** NEW Fleck 9100SXT Water Softener with Free Shipping! AVAILABLE M-F DURING INSTALLATION AND PROGRAMMING!!! We look forward to helping our customers. Thanks Doug Aplus Water LLC We have warehouses in Ohio, Florida and Arizona to expedite shipping times!!! Never lose programming during power outage!!! Series 9100 Twin-Alternating Conditioners • Light Commercial/Heavy Residential WORKS GREAT FOR: • Car Washes • Club Houses• Factories • Laundromats• Large Homes • Office Buildings • Restaurants Twin tanks provide continuous soft water. With a twin-tank system featuring the new Fleck 9100 valve, customers benefit from soft water 24 hours a day, seven days a week. That’s because the second tank of soft water acts as a backup, ready to immediately provide soft water once 100% of the first tank is used. While the second tank is in service, the first tank regenerates, giving you all the advantages of continuous soft water. The 9100SXT valve has been engineered and tested to withstand the equivalent of 27 years of uninterrupted daily use. 15% savings in both water and salt. Unlike preset systems, the twin-tank system regenerates with soft water only when necessary. Plus it uses 100% of the tank in service. The end result? Fifteen percent savings in both water and salt.** ** Compared to a system with meter delayed regeneration and the reserve set at 30% of the system capacity, provided that half of the reserve capacity is unused. Only pennies per day to operate. How the Twin-Tank Softener works. Water Softening Process Hard water enters the tank in service, and fills it. As it passes through the resin, the hard water ions are attracted to the resin. By the time the water gets to the bottom of the tank, it’s soft. Regeneration Process When the resin becomes saturated with hard water ions, the tank goes into regeneration. Brine water is injected into the tank and rinses the hard water ions off the resin and down the drain. Once the resin is free of the hard water ions, fresh, soft water backwashes all the brine water out, leaving the tank ready for service. FLECK 9100SXT TWIN ALTERNATING METERED WATER SOFTENER 48,000 GRAIN CAPACITY PER TANK Complete water softener comes with : 1.5 CUBIC FEET OF RESIN, 24,000 GRAIN CAPACITY PER TANK (TOTAL OF 48,000 GRAINS), FLECK 9100SXT CONTROLLER, TWO MINERAL TANKS, Salt Tank, BYPASS, COMPLETE SYSTEM 50X18X62 inches, 3/4 inch or 1 inch connections, (14x14x36) BRINE TANK w/safety float, AVAILABLE IN BLUE, BLACK OR ALMOND You can select options in the comment section during checkout or by email or phone prior or immediately after the sale. 3/4 inch bypass is the default if not specified by the customer and blue tanks is the default if not specified by the customer.