Ultra Custom Pools

Item Tag: Portable Drum Fan

iLiving 20/24 Inches Heavy Duty High Velocity Barrel Floor Drum Fan

With its combination of practicality, power, affordability and attractiveness all in one box. Not built for outdoor without a cover. Thermal protected motor failed safe design. Portable and Adjustable – Full 360 degrees tilt adjustability provides a wide range of air circulation.

24″ High Velocity Drum Fan 8800 CFM Industrial Drum Fan 3-Speed Control

The 24″ High Velocity Drum Fan is a portable drum blower fan designed for industrial use. With a powerful 8800 CFM airflow rate and 3-speed control, this fan is capable of providing plenty of ventilation in any space. Standing at 27 inches tall with a metal construction, this durable and efficient fan is ideal for keeping large areas cool and comfortable. Its compact design, with a diameter of 27 inches and a depth of 7.5 inches, makes it easy to transport and store when not in use.

Electric 1/3HP Motor Shop Drum Fan Blower Air Circulation,Floor Dry Replacement

1/3 HP, 1550 &/or 1075 rpm, 5 x 1/2, 230V, PSC Air Circulation Fan Motor Single or Two Speed, 2 speed options: High Efficiency, Energy Saver, Multi-Application Replacement for Shaded Pole Motors, Air Circulation Fans, Drum Fan, Shop Fan, Air Handler, Air Conditioners, Heat Pumps, & Blowers , Furnace, Fan Coil 1550 RPM @ 1.8 Amp &/or 1050-1100 RPM Frame: 5”, NEMA® 42, GE 29, stud mounting, open ventilation- air over Rotation: ECCW, Either CW or CCW, connected as CCW rotation at factory Permanent Split Capacitor (PSC) 4 Pole, 50/60 Hz, includes required Capacitor 8MFD/330VAC Thermally Protected L, INS CL130(B), E62862 Full Load Amperes (FLA) .66 high / .41 low Shaft: 3 1/4” x 1/2”, sleeve bearings Motor Length Less Shaft = 4” with capacitor detached, or 5 3/8” including capacitor mounted on bottom COM-white, HIGH-black, LOW-red, 0.327 horsepower (1/3 hp) Weight: 12 lbs. Made in USA Two Year Manufacturer's Warranty Brand New, never used. These came as bulk skid so there was never an original box. There may be scuffs and scratches that do not effect operation. McMillan Electric Co., Manufactured: June 2021 Model A1828B3572, E62788, E62815 Applications: Universal replacement for shaded -pole motors. Permanent-Split Capacitor motor can replace an equivalent Shaded-Pole motor since it is twice as efficient,and its amp draw is about 1/2 as great.   Air Moving (furnace fans, air handlers, blowers, air conditioners, exhaust fans, etc.) Commercial Refrigeration (walk-in coolers, beverage coolers, display cases, etc.)   Powr-Flite Fan Motor                            Industrialtwo (2)-speed air circulation drum fan                            Portable Fan Shop Fan                            Exhaust Fan                            HeatPump                            Condenser Fan Air Conditioner Fan Coil                            AirHandlers                            Heater Blower Fan                            HVAC Furnace Blower Fan                                          A/CCondenser                                           DrumFan  Floor Drier Mechanically reversing rotation is possible. Since the stator is positioned exactly in the center of the motor and has thru-bolts, you can use the following procedures for reversing: 1. Remove the thru-bolts. 2. Remove one end shield. 3. Remove stator, turn it around, then re-insert it. Leads should be pulled through the availableend shield ventilating openings. 4. Replace end shield, thru-bolts, and re-tighten thru-bolts. 5. Check that shaft turns freely. If shaft is tight, tap motor lightly with non-metallic mallet. It may sometimes be necessaryto loosen and re-tighten thru-bolts   PSC type motors are used where higher starting torques are needed than what a shaded-pole motor will provide. They are also used where higher efficiency motors are required. Due totheir efficiency, they have become the motor of choice versus a shaded-pole design. They are used to drive blowers and all the other air-moving applications where shaded-pole motors are found. They also are manufactured inhigher horsepower ratings than what can be found in shaded-pole designs. Therefore, they get used in heavier duty applications such as outside condensers. A PSC motor can usually be recognized by the capacitor that is connectedto it. Also, between the main pole windings in the motor, there are pole windings of finer wire. This is the auxiliary winding.