New Calor Gas Propane LPG Regulators 37 MBAR BS 341 Inlet / 3/8 BSP Outlet 766 P

4408SH2B.82 New Calor Gas (By Cavagna Group, UK) Single Stage Propane LPG Regulators, 185,000 BTU, BS 341 Inlet / 3/8″ BSP Outlet Type 766 P. Each bid quantity is for One (1) Regulator with Instruction Sheet. You may bid / buy any number, up to the total quantity available above. These were purchased at a supplier liquidation earlier this year, and they are brand new in the original factory bags. Please note that these have a BS 341 Inlet and 3/8″ BSP (British Standard Pipe) Outlet. They are therefore incompatible with most NPT connections commonly used in the USA. However, if you brought some British appliances across the pond, then you’re in luck.

Propane Patio Heater Thermocoupler Dump Switch Safety Sensor Main Control Valve

Control Valve and Thermo Coupler Suitable for Propane gas heaters with Thermoelectric Safety, Work with outdoor propane patio heater, standing patio heater, tower glass tube heaters, table propane heater, Hampton bay patio heater. Thermo coupler design for Gas heaters Outdoor heaters Gold plated, connectors inside. Thermocouple and switch are used to solve the problem that the indicator light is not on. Control Valve recommend having thread tape in order to make sure there are no leaks If your original thermocouple has a threaded body and is fixed to the heater by a pair of nuts. The product has a smooth (unthreaded) body that is tapered with a notch at the bottom to be pressed into the mounting hole and the notch holds it in place. If not suitable for your .

Propane Gas Patio Heater Valve for Thermocouple Sensor & Dump Switch Control Kit

Control Valve and Thermo Coupler Suitable for Propane gas heaters with Thermoelectric Safety, Work with outdoor propane patio heater, standing patio heater, tower glass tube heaters, table propane heater, Hampton bay patio heater.Thermo coupler design for Gas heaters Outdoor heaters Gold plated, connectors inside. Thermocouple and switch are used to solve the problem that the indicator light is not on. Control Valve recommend having thread tape in order to make sure there are no leaksIf your original thermocouple has a threaded body and is fixed to the heater by a pair of nuts. The product has a smooth (unthreaded) body that is tapered with a notch at the bottom to be pressed into the mounting hole and the notch holds it in place. If not suitable for your mo.