Hoppe Mortise Lock Single Point Mortise Lock 1″ Deadbolt Throw 2-3/8″ Backset
This will NOT work for replacing the lock body on multipoint lock units. This is a single point lock only. Hoppe Mortise Lock, Manual Gear, Single Point with 1 inch (25mm) Deadbolt throw Used by Caradco, Jeldwen, Norco and others. Stainless face plate 5/8 (16mm) inch wide x 10-7/8 inches long Face plate screw holes are spaced 10-1/8 inch Backset: 2-3/8 inch (60mm) – distance from edge of face plate to center of lock handle All Current Model Single Point Locks from HOPPE w/ Rotation Limiter (Lever is fixed and does not move after door is locked) 11517463 – 35mm backset, 14mm deadbolt throw, 16mm faceplate with radius ends 11517475 – 35mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends 11517487 – 45mm backset, 14mm deadbolt throw, 16mm faceplate with radius ends 11517499 – 45mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends 11517505 (this listing) – 60mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends 11517517 – 70mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends 11517529 – 35mm backset, 25.4mm deadbolt throw, 16mm faceplate with square ends (Please contact office if needing one of the locks not currently linked to our site) Latch handing may be changed by pulling out or inserting small screwdriver into small hole in back of latch and pushing forward, twist latch and release. See linked article below. HOPPE Screws for Installation: 8785695 – Screw 1-3/8″ ( 35mm ) 8mm Head – Stainless Steel 8785687 – Screws, 3/4″ (20mm ) 8mm Head – Stainless Steel Helpful Articles How To Drill Out A HOPPE Mortise Lock If The Dead Bolt Doesn’t Retract How to Change the Handing (Reverse the Slope of the Latch) on a HOPPE Lock
Amesbury Truth P2000 Active Single Point Mortise Lock 60/92 American Cylinder
We are an Authorized Distributor for Andersen, Larson, Marvin, Pella, GU Ferco, Hoppe, Emtek, Roto, Milgard, Peachtree, Weathershield, and many more. Shop our store for your door and window hardware needs. Customer Service Hours Monday-Friday 8am-4pm CST P2000 Active single point lock (SPL) 60/92 GearboxThe Single Point Lock (SPL) has a deadbolt and spring latch only – It is NOT a Multipoint lock (MPL)This mortise Lock case will replace the active gearbox on Amesbury MPL with the same size and configuration. Amesbury has 3 different locks – compare informationCylinder Type: AmericanBackset: 2-3/8 inch (60mm)Handle PZ: 3-5/8 inch ( 92mm)Deadbolt Throw: 1 Inch (25.4mm)Faceplate Width: 25/32″ (20mm)Faceplate Markings: LF2200Lock Depth: 2-1/2 inches (64mm)To Change Handing / Latch Reversal:1. Extend the Deadbolt and pull the spring latch out2. Rotate to correct position3. Check the function of the lock before closing the doorInstallation Note:The T-20 torx Star bit screws require 12-13 pounds of torque
G-U Monolock 50/92 Euro Single Point Mortise Lock (SPL) – Stainless Steel
Depress slot behind latch and pull latch out. Depress handle to retract deadbolt latch. You can unscrew the faceplate to reverse handing. Lift handle to throw deadbolt. The spring latch should retract flush with faceplate if installed correctly.
Stanley Single Point Door Latches 21998-003 86S9 R25444 -Lot of 10-
Alarm Lock Electrically Controlled Single-Point Digital Keypad Lock Lever *READ*
Alarm Lock Electrically Controlled Single – Point Digital Keypad Lock Lever This listing is for a used commercial Alarm Lock, unsure of the model # but seems to be of the DL2700 series. It is an electrically controlled single-point lock or latch with a digital keypad and keyed entry. *The lock is missing the battery compartment*. This item is in good used condition. It has been previously installed and shows minor cosmetic wear, such as light scuffs on the metal housing, consistent with normal use. The lock mechanism and keypad appear to be in working order. Please refer to the images for a detailed view of the item’s condition. Sold as is, with all visible components included.
Buyers Product 6-Inch Stainless Steel Flush Mount Single-Point T-Handle Latch
The latch assembly includes a lock cylinder, key set, and gasket, ensuring you have everything needed to complete the installation. The latch is made of polished stainless steel for durability and corrosion resistance.
Baldwin Landon 85345 150 1RH Single Point Entry Lever Set RH Satin Nickel
~~~ Please note this style uses a custom hole spacing, not standard. Paper template is included Please don’t hesitate to send me a message with any questions you might have about this item. I always try to respond in a timely manner to get you the answers you need Most orders ship next business day, please let me know if you have any questions on shipping . For smaller orders I ship USPS or FEDEX, and larger ones UPS. Thanks for looking! Jeremy ~~~
SALTO LA1T1570A21IM8LH Electrically Controlled Single-Point Lock or Latch Satin
Hoppe Single Point Mortise Lock With 22mm Faceplate 1″ Deadbolt Throw
Hoppe Special Faceplate GR SP HLS9350 – HLS9000 – GR SP HLS9000. manual active, 35 mm backset, 25.4 mm deadbolt throw 22 mm wide, square end with rotation limiter/locking linkage Country of origin: United States;.
Single Point Compression Latch for Underbody Truck Tool Box ， Gasket and Cyli…
The Single Point Compression Latch for Underbody Truck Tool Box is a durable and compact hardware designed for easy access to your truck’s tool box. Made in the United States, this silver-colored latch features a unique African style and is lightweight at 0.2 kg.