Morningstar SK-6 SunKeeper 6 amp 12 volt Solar Charge Controller
Morningstar SK-6 SunKeeper 6 amp 12 volt Solar Charge Controller Morningstar Sunkeeper SK-6 Junction Box Mounted Solar Controller Morningstar’s SunKeeper solar controller provides a low cost regulated output directly from the solar module to maximize battery life in small solar power applications. The SunKeeper is epoxy encapsulated and rated for outdoor use. By mounting directly to the module junction box and wiring through the junction box knockout, the connection is weather-proof. This eliminates the need for an additional housing for the controller. Key Features and Benefits: High Reliability – Rated to 70°C to operate in high temperatures at the solar module. More reliable than controllers mounted inside the junction box. Uses very low on-resistance power MOSFET’s. No need to re-rate.Outdoor Rated – ETL approved for outdoor use without an additional enclosure. Rugged IP65, UV resistant case. Epoxy encapsulated printed circuit board and watertight connection to the module junction box.Extensive Electronic Protections – Fully protected against reverse polarity, short circuit, overcurrent, lightning and transient surges, high temperature and reverse current at night.Longer Battery Life – Series PWM with 3 stage charging: bulk, PWM regulation and float. Includes temperature compensation at the controller or alternatively at the battery when using optional remote temperature sensor. Able to charge a zero voltage battery.Rated for Hazardous Locations – Specifically designed for solar power systems in the oil/gas industry. Approved for use in Class 1, Division 2, Groups A,B,C,D.More Information – Bi-color LED is easy to read from the ground when the solar module is pole-mounted. Indicates solar charging, regulation, normal nighttime operation and any controller or system faults.Easy to Install – Fits standard half inch conduit knockout (PG 13.5, M20) in module junction box. Quickly fastens with included locknut. Wires have fork connectors for easy connection to solar module terminals. Technical Specifications: Rated Solar Input SK-6: 6 amps Nominal System Voltage 12 Volts Minimum Battery Voltage 0 Volts Maximum Solar Voltage 30 Volts Self-Consumption (Charging) 7 mA Self-Consumption (Night) 2 mA Battery Charging Regulation Voltage 14.1 Volts (at 25°C) Float Voltage 13.7 Volts (at 25°C) Type of Charging Series PWM – 3 Stage: bulk, PWM and float Operating Temperature – 40°C to + 70°C Dimensions 3.9″ x 2.0″ x 0.5″ (99mm x 51mm x 13mm) Weight 0.25 lbs (0.11 kg) Fitting to Module J-box PG 13.5, M20, 1/2 inch conduit Wire Size #14 AWG (2.0 mm2) Wire Terminations #8 fork connectors Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier – USAUP TO 50% DISCOUNTSTOP BRANDSPaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. See our other itemsThank you for visiting our Ebay store!Morningstar Sunkeeper SK-6 Junction Box Mounted Solar Controller Morningstar’s SunKeeper solar controller provides a low cost regulated output directly from the solar module to maximize battery life in small solar power applications. The SunKeeper is epoxy encapsulated and rated for outdoor use. By mounting directly to the module junction box and wiring through the junction box knockout, the connection is weather-proof. This eliminates the need for an additional housing for the controller. Key Features and Benefits: — High Reliability – Rated to 70°C to operate in high temperatures at the solar module. More reliable than controllers mounted inside the junction box. Uses very low on-resistance power MOSFET’s. No need to re-rate. —Outdoor Rated – ETL approved for outdoor use without an additional enclosure. Rugged IP65, UV resistant case. Epoxy encapsulated printed circuit board and watertight connection to the module junction box. —Extensive Electronic Protections – Fully protected against reverse polarity, short circuit, overcurrent, lightning and transient surges, high temperature and reverse current at night. —Longer Battery Life – Series PWM with 3 stage charging: bulk, PWM regulation and float. Includes temperature compensation at the controller or alternatively at the battery when using optional remote temperature sensor. Able to charge a zero voltage battery. —Rated for Hazardous Locations – Specifically designed for solar power systems in the oil/gas industry. Approved for use in Class 1, Division 2, Groups A,B,C,D. —More Information – Bi-color LED is easy to read from the ground when the solar module is pole-mounted. Indicates solar charging, regulation, normal nighttime operation and any controller or system faults. —Easy to Install – Fits standard half inch conduit knockout (PG 13.5, M20) in module junction box. Quickly fastens with included locknut. Wires have fork connectors for easy connection to solar module terminals. Technical Specifications: Rated Solar Input SK-6: 6 amps Nominal System Voltage 12 Volts Minimum Battery Voltage 0 Volts Maximum Solar Voltage 30 Volts Self-Consumption (Charging) 7 mA Self-Consumption (Night) 2 mA Battery Charging Regulation Voltage 14.1 Volts (at 25°C) Float Voltage 13.7 Volts (at 25°C) Type of Charging Series PWM – 3 Stage: bulk, PWM and float Operating Temperature – 40°C to + 70°C Dimensions 3.9″ x 2.0″ x 0.5″ (99mm x 51mm x 13mm) Weight 0.25 lbs (0.11 kg) Fitting to Module J-box PG 13.5, M20, 1/2 inch conduit Wire Size #14 AWG (2.0 mm2) Wire Terminations #8 fork connectors [FREE! Sellers: Add a FREE map to your listings. FREE!] (http://newage.mystoremaps.com/echo/tagLine?sid=cea073c8-fc6f-494f-9ca5-610e8850a127&tid=2) Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application Morningstar SK-6 SunKeeper 6 amp 12 volt Solar Charge Controller Morningstar Sunkeeper SK-6 Junction Box Mounted Solar Controller Morningstar’s SunKeeper solar controller provides a low cost regulated output directly from the solar module to maximize battery life in small solar power applications. The SunKeeper is epoxy encapsulated and rated for outdoor use. By mounting directly to the module junction box and wiring through the junction box knockout, the connection is weather-proof. This eliminates the need for an additional housing for the controller. Key Features and Benefits: High Reliability – Rated to 70°C to operate in high temperatures at the solar module. More reliable than controllers mounted inside the junction box. Uses very low on-resistance power MOSFET’s. No need to re-rate.Outdoor Rated – ETL approved for outdoor use without an additional enclosure. Rugged IP65, UV resistant case. Epoxy encapsulated printed circuit board and watertight connection to the module junction box.Extensive Electronic Protections – Fully protected against reverse polarity, short circuit, overcurrent, lightning and transient surges, high temperature and reverse current at night.Longer Battery Life – Series PWM with 3 stage charging: bulk, PWM regulation and float. Includes temperature compensation at the controller or alternatively at the battery when using optional remote temperature sensor. Able to charge a zero voltage battery.Rated for Hazardous Locations – Specifically designed for solar power systems in the oil/gas industry. Approved for use in Class 1, Division 2, Groups A,B,C,D.More Information – Bi-color LED is easy to read from the ground when the solar module is pole-mounted. Indicates solar charging, regulation, normal nighttime operation and any controller or system faults.Easy to Install – Fits standard half inch conduit knockout (PG 13.5, M20) in module junction box. Quickly fastens with included locknut. Wires have fork connectors for easy connection to solar module terminals. Technical Specifications: Rated Solar Input SK-6: 6 amps Nominal System Voltage 12 Volts Minimum Battery Voltage 0 Volts Maximum Solar Voltage 30 Volts Self-Consumption (Charging) 7 mA Self-Consumption (Night) 2 mA Battery Charging Regulation Voltage 14.1 Volts (at 25°C) Float Voltage 13.7 Volts (at 25°C) Type of Charging Series PWM – 3 Stage: bulk, PWM and float Operating Temperature – 40°C to + 70°C Dimensions 3.9″ x 2.0″ x 0.5″ (99mm x 51mm x 13mm) Weight 0.25 lbs (0.11 kg) Fitting to Module J-box PG 13.5, M20, 1/2 inch conduit Wire Size #14 AWG (2.0 mm2) Wire Terminations #8 fork connectors FREE! Sellers: Add a FREE map to your listings. FREE! Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier – USAUP TO 50% DISCOUNTSTOP BRANDSSee our other itemsPayment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Thank you for visiting our Ebay store! Morningstar Sunkeeper SK-6 Junction Box Mounted Solar Controller Morningstar’s SunKeeper solar controller provides a low cost regulated output directly from the solar module to maximize battery life in small solar power applications. The SunKeeper is epoxy encapsulated and rated for outdoor use. By mounting directly to the module junction box and wiring through the junction box knockout, the connection is weather-proof. This eliminates the need for an additional housing for the controller. Key Features and Benefits: High Reliability – Rated to 70°C to operate in high temperatures at the solar module. More reliable than controllers mounted inside the junction box. Uses very low on-resistance power MOSFET’s. No need to re-rate.Outdoor Rated – ETL approved for outdoor use without an additional enclosure. Rugged IP65, UV resistant case. Epoxy encapsulated printed circuit board and watertight connection to the module junction box.Extensive Electronic Protections – Fully protected against reverse polarity, short circuit, overcurrent, lightning and transient surges, high temperature and reverse current at night.Longer Battery Life – Series PWM with 3 stage charging: bulk, PWM regulation and float. Includes temperature compensation at the controller or alternatively at the battery when using optional remote temperature sensor. Able to charge a zero voltage battery.Rated for Hazardous Locations – Specifically designed for solar power systems in the oil/gas industry. Approved for use in Class 1, Division 2, Groups A,B,C,D.More Information – Bi-color LED is easy to read from the ground when the solar module is pole-mounted. Indicates solar charging, regulation, normal nighttime operation and any controller or system faults.Easy to Install – Fits standard half inch conduit knockout (PG 13.5, M20) in module junction box. Quickly fastens with included locknut. Wires have fork connectors for easy connection to solar module terminals. Technical Specifications: Rated Solar Input SK-6: 6 amps Nominal System Voltage 12 Volts Minimum Battery Voltage 0 Volts Maximum Solar Voltage 30 Volts Self-Consumption (Charging) 7 mA Self-Consumption (Night) 2 mA Battery Charging Regulation Voltage 14.1 Volts (at 25°C) Float Voltage 13.7 Volts (at 25°C) Type of Charging Series PWM – 3 Stage: bulk, PWM and float Operating Temperature – 40°C to + 70°C Dimensions 3.9″ x 2.0″ x 0.5″ (99mm x 51mm x 13mm) Weight 0.25 lbs (0.11 kg) Fitting to Module J-box PG 13.5, M20, 1/2 inch conduit Wire Size #14 AWG (2.0 mm2) Wire Terminations #8 fork connectors FREE! Sellers: Add a FREE map to your listings. FREE! Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Morningstar SK-6 SunKeeper Solar Controller 12VDC 6A
Stellavolta.com is an authorized dealer and we only sell new products. Review this product’s handling time by clicking on the “Shipping and Payments” tab above. Ships primarily via USPS, however, we may ship UPS Ground or FedEx Ground. Faster shipping options available. We accept PayPal and all major credit cards. Morningstar SK-6 SunKeeper Solar Controller 12VDC 6A Morningstar’s SunKeeper™ solar controller provides a low cost regulated output directly from the solar module to maximize battery life in small solar power applications. Features 6A at 12 VDC Mounts directly to module junction box Ideal controller for solar powered oil/gas applications 5 Year Warranty Key Benefits High Reliability Outdoor Rated Extensive Electronic Protections Longer Battery Life Rated for Hazardous Locations More Operation Information Easy to Install FAQs What is the max wattage panel I can pair with the Morningstar SK-6 in a 12V system? PWM solar controllers, such as the SK-6, are sized by current rating of the controller. Since the SK-6 has a current rating of 6A and a Nominal System Voltage of 12 Volts, you can use any 12V solar panel/array that has a total Short Circuit Current Rating (Isc) equal to or less than 6A. Morningstar String Calculator The Morningstar String Calculator will help you decide how many PV modules you may use in series and parallel with a Morningstar charge controller. Other brands survive harsh conditions. Morningstar thrives in them. With more than 25 years of experience and well over four million products in over 100 countries – most of them still in operation – Morningstar has truly earned its reputation for building the “world’s leading solar controllers.” At Morningstar, the word “reliability” means a lot more than a marketing adjective. Morningstar’s employee-owned culture works hard to maintain the lowest hardware failure rate in the industry, because our own reputations literally ship with every product. That’s why system designers of the most mission-critical solar energy installations around the world insist on Morningstar components, and why you should too on your next project. From mineral mines in South America to telecom repeater stations in Canada, from gas wells in the Middle East to mountain peaks in Nepal, Morningstar technology and legendary quality make the difference between success and failure – and make renewable energy a practical, cost-effective, and long-term solution. SunKeeper controller used in solar suitcase application. Exchanges or Returns Please contact us before returning or exchanging an item to receive a return authorization (RA). Items returned to us without receiving a return authorization will be returned to you at your expense. We accept exchanges and returns for unopened items or damaged/defective products within 30 days of receipt of shipment. A 20% restocking fee may apply to multiple quantity returns or large ticket items. A 20% restocking fee will apply for all products that ship freight. Exchanges and returns are not accepted after 30 days of receipt of shipment. Unopened Products To make an exchange or return for an unopened product, please contact us and obtain a Return Authorization. If the exchanged or returned product is unopened with all original accessories, manuals, packaging, and/or shrink wrap, you will be responsible for return shipping. If the product was sold with free shipping, shipping charges to deliver the item will be deducted from the refund amount. A refund to your method of payment will be processed within one week of receiving an authorized return minus any applicable shipping charges. Damaged/Defective Products To make an exchange or return for a damaged/defective product, please contact us and obtain a Return Authorization. If the product is returned for being damaged/defective, we will provide a return shipping label for domestic shipping costs. If we test and confirm the product is damaged/defective and receive the product along with all original accessories, manuals, and packing, we will provide a refund for the purchase price of the product, plus domestic shipping charges, if any, assessed at the time of purchase. International shipping charges, if any, will not be reimbursed. A refund to your method of payment will be processed within one week of receiving an authorized return. If we test and confirm the product is in full working order, a refund will not be provided and you will be responsible for providing a return shipping label to have the product returned to you.