Ultra Custom Pools

Item Tag: Solar Controller

4000W 100A MPPT Solar Charge Controller USB 12V 24V 36V 48V PV Battery Regulator

4000W 100A MPPT Solar Charge Controller USB 12V 24V 36V 48V PV Battery Regulator Features:Large LCD display, support battery working status display, solar panel working status display, mode control display, load output status and each parameter display, normal and fault status display.Charging mode, light control mode, light control + time delay control mode, general control mode, manual control mode, timing control mode and test mode, the test mode is only for factory test use.It will automatic identify DC12V/24V, DC36V, DC48V by itself.Use large-section, large-spacing wiring ports, can be installed 16mm wire, the wire spacing of 7mm increases the insulation performance and the reliability of installation, effectively reduces current and voltage drop while reducing losses.The solar charge controller adopts a dual USB charging port design, which can charge two devices at the same time, and supports most of USB port devices, such as mobile phones, tablets, PSP game consoles, etc.The MOS tube is used to lock the heat sink design, the heat dissipation is more uniform, and there is no fear of the temperature rise caused by the MOS tube, the powerful heat dissipation capacity can operate normally in the environment of 55 ℃.Equipped with functions to prevent overcharge, overvoltage, DC output low voltage, high voltage protective and reverse polarity protective, etc. Clock setting instructions:When the battery is connected, press “▲” “▼” to set the clock table, short press “■” to save.Charging voltage setting instructions:After connecting the battery, after setting the clock and saving, long press “▲” for 3-5 seconds, the screen displays L**V as the floating charge voltage, which can be adjusted by pressing “▼”; short press again “▲”H**V is to increase the charging voltage, which can be adjusted by pressing “▼”; shortly press “▲” again. F**V is the low-voltage cut-off voltage of the DC load, which can be adjusted by pressing “▼”; after setting Long press “▲” for 3-5 seconds to save and exit.Specification:Type: Solar Charge ControllerMaximum charging current: 100AMaximum input voltage of photovoltaic panels: 15V-23V(12V),  30V-45V(24V),  45V-69V(36V),  60V-90V(48V)Maximum input power of photovoltaic panels: 1000W (12V), 2000W (24V), 3000W (36V), 4000W (48V)Output voltage: DC12V/24V/36V/48V; DC5V/1.5Ax2USBSupport Battery: Lithium Battery & Lead Acid BatteryWorking temperature: -25℃~55℃Cooling method: heat sink self-coolingCharging method: Focused MPPT modulation chargingWorking mode: sevenProtective function: prevent overcharge, overvoltage/DC output low voltage, high voltage protective, reverse polarity protective, etc.Package Includes:1× Solar Charge Controller1× Manual Listing and template services provided by inkFrog

2PC 4000W 100A MPPT Solar Charge Controller 12V 24V 36V 48V Battery PV Regulator

Features: ✔ LCD Liquid Crystal Display: The solar charging controller adopts an LCD liquid crystal display with backlight display, which can be clearly and intuitively displayed in the dark, one-key operation of the panel keys can adjust various system control parameters, such as float charging voltage, boost charging voltage, light control and time delay, etc. ✔ Multiple Operating Modes: This solar charge controller has seven operating modes, such as charging mode, light control mode, light and time delay control mode, universal control mode, manual control mode, timing control mode and testing mode, among them, test mode is only available to the factory test.

25A-100A MPPT Solar Panel Battery Charge Controller 12/24/48V LCD Regulator Auto

TYPE 1: 60A MPPT ORANGE(Parallel 12 pcs). – 99.99 % MPPT technology. Technical Specifications: Max PV Input: 300W, for 12V Battery; Max PV Input: 600W, for 24V Battery; Max. When battery is 12V system: Suggest Solar power 720W, suggest range:DC20V~DC80V；1440W 105V when 24V; 2100W 150 when 36V; 2800W 150v when 48V.