Ultra Custom Pools

Item Tag: Solar Panel Wire Cable

Solar Panel Wire 10 AWG(6mm²) – Solar Extension Cable 150Ft Black

The Solar Panel Wire 10 AWG (6mm²) – Solar Extension Cable is a high-quality, 150-foot long black cable specifically designed for connecting solar panels and managing the flow of electricity. This product is ideal for those looking to expand the reach of their solar power system or feed power from multiple panels.

10 AWG Solar Panel Wire 500′ Power Cable UL 4703 Copper MADE IN USA PV Gauge

Visit Our Store Solar Wire TEMCo ID: SW0006 Color: Black Conductor size: 10 AWG Length: 500 ft Feet per pound: 17.54 Nominal outside diameter (in.): 0.230 Conductor stranding: 19 strands per conductor Conductor material: Bare copper Insulation material: Cross linked Polyethylene (XLPEE) Max. amps per conductor: 40 A Max. voltage: 600 V Min. temperature rating: – 40°C Max. temperature rating: 90°C Approvals: Type USE-2 per UL 854, RHH/RHW-2 per UL 44, Type PV per UL 4703 Applications: Solar panels, DC circuits, inverter wiring data sheet Download the full specs. Free Shipping To Lower 48 States UL 4703 Cable vs. Other Types of Cable What makes UL 4703 a better choice than some other common cable ratings, such as THHN or USE-2? Overview The term “PV wire” (photovoltaic wire) is often used to refer to USE-2 or THHN wire, the terms are not interchangeable. PV wire is specifically rated in accordance with UL 4703. THHN wire is used as general building wire and lacks the construction and strength of specialized cables designated as UL 4703 or USE-2. Using THHN cable in place of either UL 4703 or USE-2 will result in failures. Though USE-2 wire is impact and crush resistant, UL 4703 rated cable is superior to USE-2 in regards to low temperature flexibility, sunlight resistance, and flame resistance. PV wire for solar panels also has a thicker jacket and insulation than USE-2 wire. USE-2 cable is used in grounded PV systems only, which UL 4703 cable can be used for both grounded and ungrounded arrays. View the quick comparison chart below for an overview. Applications Per the National Electrical Code, USE-2 wire is suitable for use in grounded PV arrays only. UL 4703 cable can be used within both grounded and ungrounded PV arrays. THHN cable is used as general building wire and cannot replace USE-2 or UL 4703 cable. Temperature Rating PV cable is rated for 90°C in wet conditions and up to 150°C in dry conditions. USE-2 is rated for 90°C in both wet and dry conditions. THHN cable is rated at 75°C in wet conditions and 90°C in dry conditions. Voltage PV wire can be rated for 600 V, 1000 V, or 2000 V. THHN and USE-2 wire are only rated for 600 V. Flexibility PV wire is made up of stranded copper conductors, which makes it flexible. USE-2 wire is usually installed in locations where it is not subject to movement or mechanical damage, so they can use either solid or stranded conductors made of copper, copper-clad aluminum, or aluminum, making it less flexible than PV wire. Insulation and Jacket Both PV and USE-2 cable use thermoset insulation and jacket, typically XLPEEE (cross-linked polyethylene) or EPCV. Testing Requirements USE-2 cable is usually installed underground where it will likely not encounter flames, while PV wire can be exposed in an installation, so flames tests are required only for PV wire. Overload and mechanical abuse tests (including crushing and impact resistance) are applicable only to USE-2 cable. PV wire must pass more stringent testing requirements for sunlight resistance and low temperature flexibility. It undergoes a 720 hour weatherometer and a -40ºC cold chamber conditioning. In contrast, the requirements for USE-2 cable are 300-hour weatherometer and -25ºC cold chamber conditioning. UL 4703 (PV Wire) Applications: Wiring solar panels. Underground service entrance wire for both grounded and ungrounded PV arrays.General purpose wiring for installation in conduit. Min. conductor size: 18 AWG Insulation: Cross-linked Polyethylene (XLPEE) Jacket: May or may not have jacke Temp rating: 90°C Wet, 150°C Dry Max Voltage: 600, 1000, or 2000 V Resistant to: Sunlight, ozone, UV, flame, moisture Flexibility at low temperatures: Higher Standards: Type USE-2 per UL 854 RHH/RHW-2 per UL 44 Type PV per UL 4703 THHN (Building Wire) Applications: General purpose wiring for installation in conduit. May also be used in machine tool, appliance and control circuit wiring. Cannot replace PV or USE-2 if standards require it. Min. conductor size: 14 AWG Insulation: Polyvinylchloride (PVC) Jacket: Nylon Temp rating: 75°C Oil, 75°C Wet, 90° Dry Max Voltage: 600 V Resistant to: Gasoline and oil Flexibility at low temperatures: Lower Standards: UL 83 & 1063 as Type THHN Wire 90°C in dry locations. Type THWN Wire 75°C in wet locations. A-A-59544, NEMA WC-5, UL-758 USE-2 (RHH/RHW Wire) Applications: Aerial, raceway, or direct burial. For connecting PV modules. Grounded PV arrays only. Min. conductor size: 14 AWG Insulation: Cross-linked Polyethylene (XLPEE) Jacket: May or may not have jacket Temp rating: 90°C Wet and Dry Max Voltage: 600 V Resistant to: Crushing and impact, sunlight Flexibility at low temperatures: Lower Standards: UL 44 for rubber covered wire. UL 854 for service entrance cable. Federal Govt. Specificiation J-C-30A, ASTM-B-3 (solid copper conductors), ASTM-B-3 and 6 (standard conductors) Features Resistant to sunlight, ozone, UV, flame, and moisture. Proudly Made in the U.S.A. ZERO WIRE IMPORTS POLICY. We have a Physical Location. If you have questions, we want to hear from you. Wanna talk or pick up your order? Stop by! We’d be glad to have you. Best Price/Quality Guaranteed! We pass on our buying power with low prices. Excellent Quality Guaranteed! Give us a call or drop by, and we’ll show you. As an OEM, we use many of the products we sell. As a result, only high quality materials are offered to you. Get it FAST. Most orders received in 2 to 5 days. Our return policy. If you don’t like it, we’ll take it back and pay the shipping! Other Solar Hardware & Tools Connectors Y Branch Connectors FFFM & ;MMMF Connectors Rigid T splitters panel connectors Connector extensions Solar Wire crimper Solar wire connector wrenches $6.75 FREE SHIPPING Welding & Battery cableUSA Made 6 gauge to 4/0 Cable Battery cable links for inverters 6 AWG to 4/0, Various Hole Sizes Shrink Tubing Glue-Lined Marine Duty Need another Gauge or Length? 10 AWG 12 AWG Electrician’s tools TH0001 HD Cable Cutter $31.49 Cuts up to 4/0 Forged blades 12″ Handles TH0002 HD Cable Cutter $36 Cuts up to 500 MCM Forged blades 12″ Handles TH0003 HD Cable Cutter $45 Cuts up to 750 MCM Forged blades 12″ Handles TH0004 Hydraulic Knockout Punch $99 1/2″ to 2 ” Punch Set 9 US Tons 5 Year Warranty TH0005 Hydraulic Cable Crimper $99 6 AWG to 600 MCM (CU) 11 Ton Crimping Force 12 Die Sets TH0006 Hydraulic Cable Crimper $79 12 to 00 (2/0) AWG (CU) 5 Ton Crimping Force 12 Die Sets TH0007 Hammer Indent Crimper $20 8 to 0000 (4/0) AWG (CU) Universal Indent Die 5 Year Warranty TH0012 Dieless Indent Crimper $55 8 to 0000 (4/0) AWG (CU) Universal Indent Die 5 Year Warranty TH0020 Dieless Indent Crimper $89 10 AWG – 400 MCM Universal Indent Die 5 Year Warranty TH0021 Sheet Metal Stud Punch $145 3 Die Sets 20 GA, 0.393″ (1mm) Mild Steel TH0034 2 Speed Hydraulic Crimper $399 6 AWG to 750 MCM 12 Ton Crimping Force 12 Die Sets TH0037 Hydraulic Knockout Punch $275 1/2″ to 4″ Punch Set 13 US Tons 5 Year Warranty Shipping Domestic Lower 48 States: FREE! Local Pickup Available: FREE!* International Calculated by location. Orders are usually processed and shipped within 24 to 48 hours of receipt of your payment. Please provide us with a physical shipping address (failing to do so may delay your order). We may ship an order by a different courier at our discretion. If you need to receive an order within a guaranteed time frame, please contact us for rush options and expedited shipping. Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. Furthermore, we will not mark merchandise values below value or mark items as “Gifts”. *Local Pick Up is available at our Fremont CA location, Monday through Friday 9:00 a.m. to 5:00 p.m. Please contact us ahead to ensure that your item is in stock at our location before pick-up. ** International Buyers, Please Note: If shipping for your country is not listed, contact us for details. Payment & Returns Payment TEMCo accepts the following payment methods: PayPal, Visa, MasterCard, AMEX, Discover. We charge 9.75% sales tax for all orders shipping within California. Tax exemption is available if we are provided with a valid California resale certificate. Returns TEMCo allows for the return of new and unused products in original factory condition and used defective products for 30 days from the date of purchase. Returns must be pre-approved by TEMCo and have a return merchandise authorization (RMA) number issued by TEMCo. Unauthorized returns will not be accepted. We recommend using a shipping carrier with online tracking and insurance. TEMCo will replace the item with an identical item, issue a full store credit for the value of the item, or issue a refund for the value of the item, minus a 20% restocking fee. Items with a 100% satisfaction guarantee are exempt from the 20% restocking fee. Customer feedback We strive to provide 5-star service. Shop with confidence! 100% Positive reviews We want nothing more for our buyers than to be 100% happy with their purchase. We strive to earn a 5-star rating from every purchase. When you receive your purchase, please take a moment to leave us a positive feedback. If there was something unsatisfactory about your purchase, please contact us before leaving feedback and we’ll do what’s necessary to remedy the problem and ensure your satisfaction! When your order ships from our warehouse, we will automatically leave you positive feedback. “I have always been delighted with the service from TEMCo.” Your customer service, which is seldom needed, is wonderful, the staff knowledgeable and courteous. The shipping has been quite fast, which make my life easier… So, thank you, for the good experiences with the company! Rick C “I have ordered from TEMCo several times over the last 2 years and have always found the process to be simple and quick.” Making the order takes only a few moments, the product is always high quality and the shipping fast. Glen B “Thank you for a very satisfying and honest transaction.” It is really great to deal with a company that does exactly what they advertise. I can truly say I would recommend your company to anyone interested in the equipment you sell. Paul Gilley “The service was awesome.” I had many tech questions, and they spent about 30 mins on the phone answering all of them for me. It is not to often to find service like that!!!!! I am so happy and will definitly purchase from them again. A+++++ MRZ Contracting Still not sure about us? Check us out on the Better Business Bureau and Reseller Ratings, or look at our eBay seller ratings with a perfect score in all categories. View our other products Battery Link Cables Motor Capacitors Electric Motors Lighting magnet wire motor starters Phase converters raw material resistance wire ring terminals SO Cord Solar Tools & Hardware switches & Relays tools valves drives welding cable About TEMCo Since 1968, TEMCo has become a trusted name in industrial power products. TEMCo products meet the demands of tough industrial applications with dependability and quality. We are proud to be an accredited member of the Better Business Bureau Online Reliability Program. Some of our customers include: TEMCo Industrial Sales, Manufacturing & Distribution 48621 Warm Springs Blvd Fremont, CA 94539 Contact us Send us a Message

10 AWG Solar Panel Wire 250′ Power Cable UL 4703 Copper MADE IN USA PV Gauge

Visit Our Store Solar Wire TEMCo ID: SW0005 Color: Black Conductor size: 10 AWG Length: 250 ft Feet per pound: 17.54 Nominal outside diameter (in.): 0.230 Conductor stranding: 19 strands per conductor Conductor material: Bare copper Insulation material: Cross linked Polyethylene (XLPEE) Max. amps per conductor: 40 A Max. voltage: 600 V Min. temperature rating: – 40°C Max. temperature rating: 90°C Approvals: Type USE-2 per UL 854, RHH/RHW-2 per UL 44, Type PV per UL 4703 Applications: Solar panels, DC circuits, inverter wiring data sheet Download the full specs. Free Shipping To Lower 48 States UL 4703 Cable vs. Other Types of Cable What makes UL 4703 a better choice than some other common cable ratings, such as THHN or USE-2? Overview The term “PV wire” (photovoltaic wire) is often used to refer to USE-2 or THHN wire, the terms are not interchangeable. PV wire is specifically rated in accordance with UL 4703. THHN wire is used as general building wire and lacks the construction and strength of specialized cables designated as UL 4703 or USE-2. Using THHN cable in place of either UL 4703 or USE-2 will result in failures. Though USE-2 wire is impact and crush resistant, UL 4703 rated cable is superior to USE-2 in regards to low temperature flexibility, sunlight resistance, and flame resistance. PV wire for solar panels also has a thicker jacket and insulation than USE-2 wire. USE-2 cable is used in grounded PV systems only, which UL 4703 cable can be used for both grounded and ungrounded arrays. View the quick comparison chart below for an overview. Applications Per the National Electrical Code, USE-2 wire is suitable for use in grounded PV arrays only. UL 4703 cable can be used within both grounded and ungrounded PV arrays. THHN cable is used as general building wire and cannot replace USE-2 or UL 4703 cable. Temperature Rating PV cable is rated for 90°C in wet conditions and up to 150°C in dry conditions. USE-2 is rated for 90°C in both wet and dry conditions. THHN cable is rated at 75°C in wet conditions and 90°C in dry conditions. Voltage PV wire can be rated for 600 V, 1000 V, or 2000 V. THHN and USE-2 wire are only rated for 600 V. Flexibility PV wire is made up of stranded copper conductors, which makes it flexible. USE-2 wire is usually installed in locations where it is not subject to movement or mechanical damage, so they can use either solid or stranded conductors made of copper, copper-clad aluminum, or aluminum, making it less flexible than PV wire. Insulation and Jacket Both PV and USE-2 cable use thermoset insulation and jacket, typically XLPEEE (cross-linked polyethylene) or EPCV. Testing Requirements USE-2 cable is usually installed underground where it will likely not encounter flames, while PV wire can be exposed in an installation, so flames tests are required only for PV wire. Overload and mechanical abuse tests (including crushing and impact resistance) are applicable only to USE-2 cable. PV wire must pass more stringent testing requirements for sunlight resistance and low temperature flexibility. It undergoes a 720 hour weatherometer and a -40ºC cold chamber conditioning. In contrast, the requirements for USE-2 cable are 300-hour weatherometer and -25ºC cold chamber conditioning. UL 4703 (PV Wire) Applications: Wiring solar panels. Underground service entrance wire for both grounded and ungrounded PV arrays.General purpose wiring for installation in conduit. Min. conductor size: 18 AWG Insulation: Cross-linked Polyethylene (XLPEE) Jacket: May or may not have jacke Temp rating: 90°C Wet, 150°C Dry Max Voltage: 600, 1000, or 2000 V Resistant to: Sunlight, ozone, UV, flame, moisture Flexibility at low temperatures: Higher Standards: Type USE-2 per UL 854 RHH/RHW-2 per UL 44 Type PV per UL 4703 THHN (Building Wire) Applications: General purpose wiring for installation in conduit. May also be used in machine tool, appliance and control circuit wiring. Cannot replace PV or USE-2 if standards require it. Min. conductor size: 14 AWG Insulation: Polyvinylchloride (PVC) Jacket: Nylon Temp rating: 75°C Oil, 75°C Wet, 90° Dry Max Voltage: 600 V Resistant to: Gasoline and oil Flexibility at low temperatures: Lower Standards: UL 83 & 1063 as Type THHN Wire 90°C in dry locations. Type THWN Wire 75°C in wet locations. A-A-59544, NEMA WC-5, UL-758 USE-2 (RHH/RHW Wire) Applications: Aerial, raceway, or direct burial. For connecting PV modules. Grounded PV arrays only. Min. conductor size: 14 AWG Insulation: Cross-linked Polyethylene (XLPEE) Jacket: May or may not have jacket Temp rating: 90°C Wet and Dry Max Voltage: 600 V Resistant to: Crushing and impact, sunlight Flexibility at low temperatures: Lower Standards: UL 44 for rubber covered wire. UL 854 for service entrance cable. Federal Govt. Specificiation J-C-30A, ASTM-B-3 (solid copper conductors), ASTM-B-3 and 6 (standard conductors) Features Resistant to sunlight, ozone, UV, flame, and moisture. Proudly Made in the U.S.A. ZERO WIRE IMPORTS POLICY. We have a Physical Location. If you have questions, we want to hear from you. Wanna talk or pick up your order? Stop by! We’d be glad to have you. Best Price/Quality Guaranteed! We pass on our buying power with low prices. Excellent Quality Guaranteed! Give us a call or drop by, and we’ll show you. As an OEM, we use many of the products we sell. As a result, only high quality materials are offered to you. Get it FAST. Most orders received in 2 to 5 days. Our return policy. If you don’t like it, we’ll take it back and pay the shipping! Other Solar Hardware & Tools Connectors Y Branch Connectors FFFM & ;MMMF Connectors Rigid T splitters panel connectors Connector extensions Solar Wire crimper Solar wire connector wrenches $6.75 FREE SHIPPING Welding & Battery cableUSA Made 6 gauge to 4/0 Cable Battery cable links for inverters 6 AWG to 4/0, Various Hole Sizes Shrink Tubing Glue-Lined Marine Duty Need another Gauge or Length? 10 AWG 12 AWG Electrician’s tools TH0001 HD Cable Cutter $31.49 Cuts up to 4/0 Forged blades 12″ Handles TH0002 HD Cable Cutter $36 Cuts up to 500 MCM Forged blades 12″ Handles TH0003 HD Cable Cutter $45 Cuts up to 750 MCM Forged blades 12″ Handles TH0004 Hydraulic Knockout Punch $99 1/2″ to 2 ” Punch Set 9 US Tons 5 Year Warranty TH0005 Hydraulic Cable Crimper $99 6 AWG to 600 MCM (CU) 11 Ton Crimping Force 12 Die Sets TH0006 Hydraulic Cable Crimper $79 12 to 00 (2/0) AWG (CU) 5 Ton Crimping Force 12 Die Sets TH0007 Hammer Indent Crimper $20 8 to 0000 (4/0) AWG (CU) Universal Indent Die 5 Year Warranty TH0012 Dieless Indent Crimper $55 8 to 0000 (4/0) AWG (CU) Universal Indent Die 5 Year Warranty TH0020 Dieless Indent Crimper $89 10 AWG – 400 MCM Universal Indent Die 5 Year Warranty TH0021 Sheet Metal Stud Punch $145 3 Die Sets 20 GA, 0.393″ (1mm) Mild Steel TH0034 2 Speed Hydraulic Crimper $399 6 AWG to 750 MCM 12 Ton Crimping Force 12 Die Sets TH0037 Hydraulic Knockout Punch $275 1/2″ to 4″ Punch Set 13 US Tons 5 Year Warranty Shipping Domestic Lower 48 States: FREE! Local Pickup Available: FREE!* International Canada & Mexico: $55 Other Destinations:** $65 Orders are usually processed and shipped within 24 to 48 hours of receipt of your payment. Please provide us with a physical shipping address (failing to do so may delay your order). We may ship an order by a different courier at our discretion. If you need to receive an order within a guaranteed time frame, please contact us for rush options and expedited shipping. Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. Furthermore, we will not mark merchandise values below value or mark items as “Gifts”. *Local Pick Up is available at our Fremont CA location, Monday through Friday 9:00 a.m. to 5:00 p.m. Please contact us ahead to ensure that your item is in stock at our location before pick-up. ** International Buyers, Please Note: If shipping for your country is not listed, contact us for details. Payment & Returns Payment TEMCo accepts the following payment methods: PayPal, Visa, MasterCard, AMEX, Discover. We charge 9.75% sales tax for all orders shipping within California. Tax exemption is available if we are provided with a valid California resale certificate. Returns TEMCo allows for the return of new and unused products in original factory condition and used defective products for 30 days from the date of purchase. Returns must be pre-approved by TEMCo and have a return merchandise authorization (RMA) number issued by TEMCo. Unauthorized returns will not be accepted. We recommend using a shipping carrier with online tracking and insurance. TEMCo will replace the item with an identical item, issue a full store credit for the value of the item, or issue a refund for the value of the item, minus a 20% restocking fee. Items with a 100% satisfaction guarantee are exempt from the 20% restocking fee. Customer feedback We strive to provide 5-star service. Shop with confidence! 100% Positive reviews We want nothing more for our buyers than to be 100% happy with their purchase. We strive to earn a 5-star rating from every purchase. When you receive your purchase, please take a moment to leave us a positive feedback. If there was something unsatisfactory about your purchase, please contact us before leaving feedback and we’ll do what’s necessary to remedy the problem and ensure your satisfaction! When your order ships from our warehouse, we will automatically leave you positive feedback. “I have always been delighted with the service from TEMCo.” Your customer service, which is seldom needed, is wonderful, the staff knowledgeable and courteous. The shipping has been quite fast, which make my life easier… So, thank you, for the good experiences with the company! Rick C “I have ordered from TEMCo several times over the last 2 years and have always found the process to be simple and quick.” Making the order takes only a few moments, the product is always high quality and the shipping fast. Glen B “Thank you for a very satisfying and honest transaction.” It is really great to deal with a company that does exactly what they advertise. I can truly say I would recommend your company to anyone interested in the equipment you sell. Paul Gilley “The service was awesome.” I had many tech questions, and they spent about 30 mins on the phone answering all of them for me. It is not to often to find service like that!!!!! I am so happy and will definitly purchase from them again. A+++++ MRZ Contracting Still not sure about us? Check us out on the Better Business Bureau and Reseller Ratings, or look at our eBay seller ratings with a perfect score in all categories. View our other products Battery Link Cables Motor Capacitors Electric Motors Lighting magnet wire motor starters Phase converters raw material resistance wire ring terminals SO Cord Solar Tools & Hardware switches & Relays tools valves drives welding cable About TEMCo Since 1968, TEMCo has become a trusted name in industrial power products. TEMCo products meet the demands of tough industrial applications with dependability and quality. We are proud to be an accredited member of the Better Business Bureau Online Reliability Program. Some of our customers include: TEMCo Industrial Sales, Manufacturing & Distribution 48621 Warm Springs Blvd Fremont, CA 94539 Contact us Send us a Message

US 1 Pair Black + Red Solar Panel Extension Cable Wire Connector 10 AWG

STORE HOME ALL ITEMS HOT ITEMS ABOUT US ADD TO FAVS FEEDBACK CONTACT US US 1 Pair Black + Red Solar Panel Extension Cable Wire Connector 10 AWG US 1 Pair Black + Red Solar Panel Extension Cable Wire Connector 10 AWG *US Seller and fast shipping *100% New, High quality *Insulation Jacket, Chemically crosslinked polyethylene, Sunlight resistant *Anti-ultraviolet, flame retardant, high temperature resistance, low resistance, conductive stability *Resistant to pressure, folding and flexibility 10AWG cable adopts approximately 4 square wires. 12AWG cable adopts approximately 2.5 square wires. Note: Our cable core uses 56/52 strands of tinned copper wire. Copper wire tin plating refers to the process of plating a thin layer of metal tin on the surface of the copper wire. The advantages of tinned copper wire compared to pure copper wire: 1. The tin plating of the copper wire is mainly to prevent the copper from being oxidized to form a layer of film-copper green when exposed to the air. The patina has poor conductivity and will increase resistance. Tinned copper wire can prevent redox reaction and produce patina; can increase heat dissipation; can improve conductivity and improve wire performance. 2. In addition, tin plating of copper wires can also prevent the insulating rubber from sticking, making the core black and brittle, and improve its solderability. Tinned copper wire is mainly used for rubber insulated mine cables, flexible wires, flexible cables and marine cables as conductive cores, as well as outer shield braid and brush wires of cables. Features 10 AWG Solar Panel Extension Cable Wire: 1/2/3/6/10/12/20/30Ft Please Select ClickDouble-head Solar Panel Extension Cable Wire12/10AWG12AWG10AWGSingle-head Solar Panel Extension Cable Wire12/10AWG12AWG10AWGSingle-head Solar Panel Extension Cable Wire + Male/Female Plug 10AWG You’ll Receive 1 Pair Black + Red Solar Panel Extension Cable Wire Connector 10 AWG SKU#: XB.FG.423-HY Shipping Weight: 4oz net: 3oz (X-FR;10-Padded;20-BoxA;30-BoxM;40-BoxL) XB.FG.424-HY Shipping Weight: 5oz net: 4oz (X-FR;8-Padded;10-BoxA;20-BoxM;30-BoxL) XB.FG.425-HY Shipping Weight: 7oz net: 6oz (X-FR;5-Padded;5-BoxA;10-BoxM;15-BoxL) XB.FG.426-HY Shipping Weight: 11oz net: 10oz (X-FR;3-Padded;5-BoxA;10-BoxM;15-BoxL) XB.FG.427-HY Shipping Weight: 15oz net: 14.58oz (X-FR;2-Padded;2-BoxA;4-BoxM;6-BoxL) XB.FG.428-HY Shipping Weight: 1lb, 4oz net: 18.98oz (X-FR;2-Padded;2-BoxA;4-BoxM;5-BoxL) XB.FG.429-HY Shipping Weight: 2lb net: 30.36oz (X-FR;1-Padded;1-BoxA;3-BoxM;4-BoxL) XB.FG.395-6-HY Shipping Weight: 2lb, 13oz net: 43.88oz (X-FR;1-Padded;1-BoxA;2-BoxM;3-BoxL) Payment Payment: Paypal Preferred. Local pickup NOT available at this time. Shipping Shipping: We process your order within 1 business day upon payment(note: NOT counting holidays or weekends). International shipping also available, please note by default all international packages does not come with tracking unless upgraded to priority mail. Package transit time: please expect 3-7 business days within US, 10-20 business days to Canada, up to 25 business days all around the world. RETURN & REFUND Return & Refund: Please read the item description and check the pictures carefully before bidding. Return or refund is available only if item DOA or there’s error in item description causing the item not fitting your need. In such cases, seller pays for all related shipping cost if any. Returns are also acceptable if buyer purchased this by mistake and item still in good condition for reselling. Buyer is responsible for all related shipping cost. FeedbackWe maintain high standards of excellenceandstrive for 100% customer satisfaction!Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. ABOUT US High Quality ETL/CSA/CE/NSF/FCC – We passed every evaluation of pool products, even ASTM which for pool alarm in USA laboratory.. Customer – Service We value the service we provide and our loyal returning customers can always expect some appreciation from us, like a future service, discount or a gift. Affordable Prices We aim to make our service as reasonably priced as possible. That’s why we cut on all unessential business expenses… STORE HOME ALL ITEMS HOT ITEMS ABOUT US ADD TO FAVS FEEDBACK CONTACT US Copyright © 2017 wfyb. All Rights Reserved.

Solar Panel Wire 328 Ft 10AWG 6mm2 Solar Cable Tinned Copper Wire Black

What is this?The solar panel cable is made of tinned copper material, with low resistance and high conductive, and double layers of insulation for great flame retardant and resistance to extreme temperatures, designed for roof solar panels, boats, or RVs powered by solar panels. What will I get?The solar panel extension cable, we provide here, is in size of: 100 meters/328 feet long, 10AWG 6mm² tinned copper wire, 1500V rated voltage, working temperatures up to -40°F to 257°F (-40°C to 125°C)In the package of 1 x Solar Panel WireAre there any advantages of the product?Our solar wire has waterproof flame retardant, enough length for your DIY to connect your solar panel system, and uses great sheath and insulating material, high and low-temperature resistance, abrasion resistance and corrosion resistance, and anti-ultraviolet.

Solar Panel Wire 25ft 10AWG 6mm 2 Solar Cable Tinned Copper Connector

What is this?The solar panel cable is made of tinned copper material, with low resistance and high conductive, and double layers of insulation for great flame retardant and resistance to extreme temperatures, designed for roof solar panels, boats, or RVs powered by solar panels. What will I get?The solar panel extension cable, we provide here, is in size of: 7.6 meters/25 feet long, 84 strands 0.