Spears 2 Inch Glue PVC 90 Elbow SCH 80 Lot Of TWO
Quantity of two Thanks for looking
Spears 1413-007 PVC 3/4″ Insert X Insert 90° Reducing Elbow 1,3,5, or 10 Pack
Spears 1413-007 PVC 3/4″ Insert X Insert 90° Reducing Elbow 1,3,5, or 10 Pack 3/4 PVC INSERT 90 ELL INSERTXMPT SpecificationsItem Number: 1413-007Category: Insert Fittings ProductJoint: Insert x MiptManufacturer: SpearsSize: 3/4Subcategory: 90° Ell – PVCType: 90° Ell – PVC 📦 Fast Shipping5 ⭐ Service💯% Valid Tracking and Delivery
Spears 1413-012 1-1/4″ PVC Insert 90 Elbow Insert x MIPT
This fitting is designed for standard applications where a change in direction is required. The end connection allows for an insert x male threaded joint, making it suitable for a variety of plumbing needs.
Spears 4″ X 4″ X 3″ PVC SCH 40 Tee
Spears SCH 40 D2466 4″ X 4″ X 3″.
(Lot of 4) 1-1/4″ x 1-1/4″ x 1/2″ Spears Barbed Reducing Tee PVC 1402-166 NeW!
The product is a lot of four 1-1/4″ x 1-1/4″ x 1/2″ Spears barbed reducing tees made of PVC. These tees are manufactured in the United States and designed for plumbing and fitting purposes. All are brznd new, never used.
Spears 2012-015 Gate Valve, 1-1/2 In., Socket Weld, Pvc
Light Industrial. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
Spears 2020-012 Gate Valve, 1 1/4 In, Socket Weld, PVC Hand Wheel Actuator
Handle: High-impact polypropylene handwheel. ✔ Smooth operation with positive grip handwheel. Handle Type: Handwheel. Connection Type: Socket x Socket (solvent weld). ThisSpears PVC gate valve is widely trusted for its durability, corrosion resistance, and dependable shut-off performance.
SPEARS 3/4″ PVC Insert Coupling (Insert x Insert) 1, 3, 5, or 10 Pack
3/4″ PVC Insert Coupling (Insert x Insert) 1, 3, 5, or 10 Pack Spears PVC Insert Fittings are designed for use with either ASTM D 2104 Schedule 40 or D 2239 SIDR pressure rated polyethylene pipe. Chemical and corrosion resistant, rigid PVC barbed inserts provide excellent grip with polyethylene materials. Spears Insert Fittings are manufactured from high quality PVC materials to meet or exceed the applicable requirements of ASTM D 2609, Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe Special Insert Fittings design uses built-in lock ring for easy connection without clamps to Polyethylene (PE) Plastic Pipe used with standard Insert Fittings Spears Insert Fittings are tested and Certified by the NSF International for use in potable water systems. 📦 Fast Shipping5 ⭐ Service💯% Valid Tracking and Delivery
Spears 1-1/4 in Straight PVC Gate Valve Non-Shock 200 PSI Water
Spears 1-1/4 in Straight PVC Gate Valve Non-Shock 200 PSI Water
Spears PVC Tube Fitting, Plug, Schedule 40, Gray, 1″ Barbed 1,3,5,10 Pack
Spears 1449 Series PVC Tube Fitting, Plug, Schedule 40, Gray, 1″ Barbed 1,3,5, or 10 Pack Plug for closing the end of a pipeFitting connects to schedule 40 PE pipePVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbonsBarbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately)Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable waterThe Spears 1449 series tube fitting is made of gray polyvinyl chloride (PVC) plastic and connects to the open end of schedule 40 polyethelene (PE) pipe. This plug has a barbed fitting to close the end of flexible PE pipe and creates a tight seal when used with a hose clamp (sold separately). PVC is corrosion resistant, and has high strength. It resists reactions with acids, gasoline, alcohol, and hydrocarbons. The fitting meets D 2609 standards set by ASTM International for plastic insert fittings for use with PE pipe, as well as ASTM schedule 40 standards for wall thickness to support working pressure to 140 psi. It is certified by NSF International for use with potable water. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001. 📦 Fast Shipping5 ⭐ Service💯% Valid Tracking and Delivery