3/8″ x 1/4″ Tube O.D. Heavy Duty Brass Push-In Reducing Union, Straight Air Line

3/8″ x 1/4″ Tube O.D. Reducing UnionHeavy Duty All Brass Construction0-150 PSI Working Pressure Range of the Fitting. Please reference the working / burst pressure of the tubing type you plan on connecting to this fitting for the most accurate Maximum PSI rating.Working Temperature Range of -10° – 200° FFull Flow Design, Self Contained Assembly, Reusable Pro-Edge Industrial push-in fittings, also known as Push-to-pull, push-to-connect, push-fit, or instant fittings, let you easily connect hoses in your compressed air system. These self contained fittings are a type of easily removed fittings that allow an air line to be attached. Simply push tubing in, no tools. Saves up to 75″ of assembly time of standard compression fittings. These fittings act similar to the way regular compression fittings work, but use a resilient O-ring for sealing, and a grip ring to hold the tube in place. The main advantages of this technology over traditional soldered copper or glued plastic are that fittings can easily be unmounted and re-used, speed of assembly, assembly when wet and that the joints are still rotatable after connection. The issues that can cause joint failure are not pushing the pipe in far enough, not having a smooth round end to the pipe, too rough a pipe surface under the O-ring and detritus in the mechanism. Deburring the end of the pipe is vital to avoid damaging the O-ring on insertion, and the pipe surface under the ring must be smooth to get an adequate seal. The pipe end should be square so it sits against the stop in the fitting and does not cause turbulence. It is quite easy to push the pipe in only as far as the grab ring, or the O-ring, and not all the way to the stop. This fitting is all brass construction. The tube release is made of acetal resin. BunaN “O” rings standard. The threads are made of brass, with sealant, when applicable. This Brass fitting is NOT deemed Lead Free Terms and ConditionsPayment Information: VISA / MASTERCARD / AMEX / DISCOVER / PAYPAL accepted. Contact Us: Please feel free to contact us anytime through the ebay message board. On each of our ebay listings you will see options to contact us. The “ask seller a question” link and the “Contact seller” link are the two best ways to contact us. Your question will automatically link to your purchase or the item in question and will be answered Mon-Fri during our operating hours. No ebay question or message goes unanswered. Please DO NOT contact us via email regarding your ebay purchase. Return Policy: Here is how to arrange an ebay return http://pages.ebay.com/help/buy/return-item.html Arrangements must be made within 30 days of purchase. Returns are permitted only with the prior approval of UPE_Group. A minimum restocking fee of 15% will be applied on returns due to customer error. Authorized returns will be credited at the transaction price, minus any applicable fees. The adjusted amount will refunded back to the buyer’s payment method after the item has been returned back to UPE_Group. The above fees will NOT be charged on items returned due to manufacturers’ defect or shipping errors caused by UPE_Group, USPS or FEDEX.Shipping Address: We ship to the buyers ebay ship to address. Please make sure your ship to address is correct before checking out. Domestic Shipping: We are open Monday through Friday shipping eBay orders. All orders ship within 24 BUSINESS Hours of payment confirmation. We ship most orders the same day that we receive them, just as long as your payment clears before mid afternoon EST. Items are shipped USPS or FEDEX ground. The shipping method will be listed on the shipping/payments tab or underneath the buy-it-now button on all ebay listings. We generate shipping labels through ebay, so your tracking info will be emailed to you the moment your shipping label is generated. You can click the link on your tracking info to get up to date tracking info regarding your shipment. You can find the link on your transaction details page, or under the “Buying” portion on your “My eBay” page. For specific shipping info and combined shipping rules, please click the “shipping and payment” tab on any of our ebay listings. That link will show you the shipping specifics and combined shipping rules relating to that specific item. International Shipping: All items we sell are available for international shipping through the ebay 3rd party Global Shipping program. UPE_Group will ship your item to the ebay global shipping center in Kentucky. From there, eBay forwards the package to your international destination. Please click the shipping/payments tab of our listings for international shipping information or visit this ebay page. http://pages.ebay.com/help/buy/shipping-globally.html Combined Shipping Rules: Simply use the ebay shopping cart feature and add items to your cart for one flat shipping rate. eBay’s Combined shipping Rules are usually implemented by all ebay sellers. The only way for eBay to recognize multiple items going to the same address is by using the ebay shopping cart feature. Add items into ONE ebay shopping cart and check out on ONE transaction/purchase. You can also request an invoice from the seller once you have added all of the items into your ebay shopping cart. Tracking Information: We provide Tracking info on every item that is purchased on ebay. The tracking info will be emailed to you the day your order is shipped. Feedback Policies: Anyone who purchases from us gets positive feedback. If you have any sort of issue with the item you received from us, please contact us before leaving a bad feedback. We would be more than happy to correct any issue. Regardless if we accidentally sent you the wrong item (which seldom happens) or the customer ordered the wrong part by mistake. WE WILL correct any potential problem. Sales Tax: The Purchaser shall be responsible for the payment of all state sales taxes. Liability: UPE_Group is a dstributor and as such, has no direct or indirect control over the materials, processes, or quality control procedures used by the manufacturers of the products we resell. Accordingly, UPE_Group will NOT be held responsible for damages resulting from product defects, or, from mis-applications/improper installations by the customer or end user. It is the purchasers responsibility to determine the suitability of the product for the specific application. If it is deemed defective, UPE_Group shall be held harmless of any and all damages including (but not limited to) physical injury, property damage, water damage or otherwise for any reason. If the purchased item is deemed defective, UPE_Group will make arrangements to replace the defective item at no additional costs to the customer. CA Prop 65 WARNING: Some of the products sold by Universal Pneumatic and Electric Group may contain chemicals known to the State of California, Vermont and others to cause cancer, birth defects, or other reproductive harm. It is the purchasers responsiblity to determine the suitability of these products for your specific application. Including, but not limited to, using alternative products. UPE_Group shall be held harmless of any and all damages including but not limited to physical, property, water or otherwise for any reason. Your use of any information or materials on this listing is entirely at your own risk, for which we shall not be liable.By submitting your order, the purchaser acknoledges agreement with the Terms & Conditions as outlined here and our website. PLEASE CONTACT US WITH ANY QUESTION YOU HAVE REGARDING ANY OF OUR PRODUCTS OR TERMS AND CONDITIONS. THANK YOU UPE_GROUP

SimCos 23 Gauge Pinner Nails 5/8,3/4,5/6,1,1-3/8 Assorted 5 Sizes Headless Pi…

【Q235 Steel pin nails】The headless nails are made of the great Q235 steel, strong rust & corrosion resistance, sturdy and not easy to break, with good toughness and tensile strength, which are smooth and bright on the surface with no nail jamming,which fits the 23 gauge pinner or pin nail gun between 5/8″ and 1-3/8 or 2″.

1″ 4-20ma 24VAC/DC Motorized Electrical Control Proportional Integral Valve

HomePaymentShippingReturn PolicyAbout UsContact UsFeedbackStore CategoriesOtherButterfly ValveVacuum PumpCirculation PumpDelivery From USDelivery From CAMotorized Ball Valve2 Way Brass3 Way Brass2 Way Stainless3 Way StainlessDelivery From USDelivery From DEBrass Ball Valve-N.C.Brass Ball Valve-N.O.Plastic Ball Valve-N.C.Stainless Ball Valve-N.O.Stainless Ball Valve-N.C.Brass Power On/Off Valve3 Way CF8 Motorized Valve3 Way Brass Motorized ValveStainless Power On/Off ValveStainless Ball Valve-N.C.PlugStainless Ball Valve-N.O.PlugProportional Control Valve0-5V0-10V4-20ma1″ 4-20ma 24VAC/DC Motorized Electrical Control Proportional Integral ValveProduct Overview◎ Valve Dimension: 1″ 2 Way NPT Full Bore Valve Body◎ Rated Torque: 20 N.m;◎ Install Below 15 N.M ;◎ Rated Voltage: 24VAC And 24VDC ;◎ Control Signal: 4-20Ma;◎ Position Feedback: 4-20Ma;◎ Position Accuracy: ±1%(Set By Software);◎ Adopted High-Performance Brushless Motor,Overload Protection of Internal Motor;◎ It can be used 20,000 times.*1;◎ Connection standard: ISO5211 F03、F04、F05. Electrical Data◎ Rated Voltage: AC/DC24V (AC18-28; DC18-32V)◎ Power consumption: 15w@running 0.5w@holding◎ Peak current: 950mA@5ms@ rated voltage◎ Connecting cable: 7*0.2mm 2 cable, voltage withstand AC300V◎ Fuse: 2A Functional Data◎ Rated torque: 20N.m@rated voltage◎Angle of rotation: 90±2°◎ Max angle of rotation: 330°±5°◎ Manual operation: ※ Matching hexagon wrench,using at no power◎ Running time: About 10S (per 90°)◎Continuous running: Continuous running◎ Sound power level: Max50dB(A)◎ Position indicator: Mechanical and screen Working Conditions◎ Electricity safety level:III Type (safety low voltage )◎ Inflaming retarding level: V0 UL94 test method◎ Enclosure:IP67 As Per En60529/GB4208-2008 (all directions); F type can add dehumidifying heater◎ Insulation resistance: 100MΩ/500VDC◎ Withstand voltage: 500VAC 1Min◎Medium temperature: ≤80°can install to actuator directly; >80° need to install bracket or heat radiation stand◎ Working environment: ※ Indoor or outdoor; if exposed to the rain or sunshine,need to install protective device for the actuator◎ Explosion-proof level: Not explosion proof products, do not use them in flammable and explosive environment.◎ Ambient temp: -30℃— 60℃◎Non-operation temp: ≤-40℃ or ≥80℃◎ Ambient humidity: 5-95%RH non-condensing◎ Shock resistance: ≤300m/S ◎ Vibration: ※10 to 55 Hz, 1.5 mm double amplitude◎Installation notes: 360°any angle,The need for manual operation;or the wiring space◎ Maintenance: Free maintenance◎ Certification: CE / MA / AL Electrical Data◎ Connection standard: ISO5211 F03、F04、F05◎ Output axis specification: Female octagonal or male square◎ Hole deepness: ≤17mm(Female octagonal)/6.5mm( Male square)◎ Weight:ABS material 0.62kgDeliveryReturn PolicyImport DutyAbout usContact usDeliveryWe Only Ship to eBay Registered Address. So Please Be Assuring Your Address is Correct and Valid When Check Out.Import duties,Taxes, and Charges are Not Included in the item Price or Shipping Cost. These Charges Are the Buyer’s Responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding or buying.All the Items Will be Dispatched to Worldwide Wthin Handling Time By Post Packet/Postal Air Mail/Expedited Shipping(Extra Shipping Charge Requirment).Some of Item We Had it in U.S., Australia, Canada, Germany Warehouse, We May Shipping it by Local Carrier With Verify Tracking Number.If You Have Not Received Your Package As Our Declaring In Description Please Contact Me Before You Want to Leave Feedback We Can Refund Money or Resend Item as Your ChoiceBecause the international logistics takes a longer time, we hope you can be patient and we’ll timely update order status for you.Each Product Has Whown Our Hearts to you, and We Believe That our Products Will Not Disappoint You For Your PatienceReturn PolicyAfter Receiving The item, Contact Seller WithinReturn shipping14 daysBuyer pays return shippingReturn policy detailsReturns allowed for 14 days on unwanted items.Item must be unused and unopened.Return postage to be borne by customer.Damaged or Faulty Items – please inform us on receipt and we can arrange for replacements/returns/refunds on an individual basis.This does not affect your statutory rightsImport Duty Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding or buying. About usWe’re concentrate on Motorized Ball Valve, Circulation Pump, Solar Powe Pump. We Have Warehouse From Germany, UK, USA, Can Help With Buyer Get The Item As Soon As Possible and Save Import Charge. Contact usAll communication is handled through emails and ask a question. We strive to answer all emails as quickly as possible.You May Also Like