Ultra Custom Pools

Item Tag: Straight

1/8″ Tube O.D. x 1/8″ MNPT Heavy Duty Brass Push-In Connector, Straight Air Line

1/8″ Tube O.D. x 1/8″ MNPT Straight ConnectorHeavy Duty All Brass Construction, Full Flow Design0-150 PSI Working Pressure Range of the Fitting. Please reference the working / burst pressure of the tubing type you plan on connecting to this fitting for the most accurate Maximum PSI rating.Working Temperature Range of -10° – 200° F, Full Flow Design, Self Contained Assembly, ReusablePlease Note 1/8″ NPT Measures 0.405″ Outside thread diameter in inches. See attached NPT Thread chart. Pro-Edge Industrial push-in fittings, also known as Push-to-pull, push-to-connect, push-fit, or instant fittings, let you easily connect hoses in your compressed air system. These self contained fittings are a type of easily removed fittings that allow an air line to be attached. Simply push tubing in, no tools. Saves up to 75″ of assembly time of standard compression fittings. These fittings act similar to the way regular compression fittings work, but use a resilient O-ring for sealing, and a grip ring to hold the tube in place. The main advantages of this technology over traditional soldered copper or glued plastic are that fittings can easily be unmounted and re-used, speed of assembly, assembly when wet and that the joints are still rotatable after connection. The issues that can cause joint failure are not pushing the pipe in far enough, not having a smooth round end to the pipe, too rough a pipe surface under the O-ring and detritus in the mechanism. Deburring the end of the pipe is vital to avoid damaging the O-ring on insertion, and the pipe surface under the ring must be smooth to get an adequate seal. The pipe end should be square so it sits against the stop in the fitting and does not cause turbulence. It is quite easy to push the pipe in only as far as the grab ring, or the O-ring, and not all the way to the stop. This fitting is all brass construction. The tube release is made of acetal resin. BunaN “O” rings standard. The threads are made of brass, with sealant, when applicable. This Brass fitting is NOT deemed Lead Free

1/8″ x 1/8″ Tube O.D. Brass Composite Push-In Union, Straight Air Line

1/8″ x 1/8″ Tube O.D. Union0-150 PSI Working Pressure Range of the Fitting. Please reference the working / burst pressure of the tubing type you plan on connecting to this fitting for the most accurate Maximum PSI ratingMin Burst Pressure of 340PSI (23BAR)Working Temperature Range of 0° – 160° FComposite and Brass Body, Stainless Steel Gripper and NBR 70 O-Ring Pro-Edge Industrial push-in fittings, also known as Push-to-pull, push-to-connect, push-fit, or instant fittings, let you easily connect hoses in your compressed air system. They are a type of easily removed fittings that allow an air line to be attached. These fittings act similar to the way regular compression fittings work, but use a resilient O-ring (NDR 70) for sealing, and a grip ring (stainless steel) to hold the tube in place. The main advantages of this technology over traditional soldered copper or glued plastic are that fittings can easily be unmounted and re-used, speed of assembly, assembly when wet and that the joints are still rotatable after connection The issues that can cause joint failure are not pushing the pipe in far enough, not having a smooth round end to the pipe, too rough a pipe surface under the O-ring and detritus in the mechanism. Deburring the end of the pipe is vital to avoid damaging the O-ring on insertion, and the pipe surface under the ring must be smooth to get an adequate seal. The pipe end should be square so it sits against the stop in the fitting and does not cause turbulence. It is quite easy to push the pipe in only as far as the grab ring, or the O-ring, and not all the way to the stop. This fitting has a body made of Composite Polyacetal (hemopolymer, copolymer) and brass. The tube release is made of acetal resin. The retainer and spacer is made of brass, and the threads are made of brass, with white sealant, when applicable.

10 PC. 1″ PEX X 1″ FEMALE NPT THREADED ADAPTER BRASS CRIMP FITTING LEAD FREE NSF

You are buying lot of 10 PIECES 1″ PEX X 1″ FEMALE NPT THREADED ADAPTER BRASS – CRIMP FITTING (LEAD FREE) These are lead free and certified to ANSI/NSF-61 HOMEWORK88 LLC we will give our customers 30 days to try out ours confident products, if some how you don’t like it you can mail it back to us we will refund you the money with no question ask, NO restocking fees and even pay for your return shipping fees. If you like it please leave A++ to our feedback, Thank You for your support. You have nothing to worry about to buy it from HOMEWORK88 LLC. Buy it now, more you buy more you save from HOMEWORK88 LLC, Our goal is to provide you with the best quality product at the lowest price. PLEASE VISIT OUR EBAY STORE FOR MORE PRODUCTS Compatible with all types and brands of PEX Tubing:WattsEverhotViegaZurnNibcoBowetc.Connection SystemsCrimp Connection System (PEX Crimp tool + Copper Crimp Rings)Clamp Connection System (PEX Clamp tool + Stainless Steel PEX Clamps)Design certified and agency listed.Compact, robust LEAD FREE brass body. Foundation of a strong, corrosion resistant, durable fitting.Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels.Designed for hydronic heating as well as potable water distribution.200 PSIShipping Same day or 1 day handling time. If you order and pay it before 3pm most of time it will going to be same day delivery after that before 11:45pm your order will be ready to ship tomorrow morning. It will going to be USPS 1-3 DAYS PRIORITY MAIL with insurance and tracking numbers. (USPS will be close Saturday at 12:30pm and Sunday)

(10) 1/2″ MALE THREADED HOSE BIBB NOKINK, WATER OR OIL 125 PSI (LEAD FREE BRASS)

You are buying lot of 10 pieces 1/2″ MALE THREADED HOSE BIBB NOKINK, WATER OR OIL 125 PSI (LEAD FREE BRASS)LEAD FREE BRASSMIP IN / MNPT: 1/2″ 3/4″ HOSE THREADED OUTLETLARGE FLOW AREAFOR USE WITH WATER OR OILPSI 125 (WATER-OIL)1/4-TURN OPERATIONTHREADED ENDS COMPLY WITH ANSI B1.20.1HOSE THREADS COMPLY WITH ANSI B1.20.7NO KINKHOMEWORK88 LLC we will give our customers 30 days to try out ours confident products, if some how you don’t like it we will even pay for your return shipping fee with no question ask. And if you like it please leave A++ to our feedback, Thank You for your support. You have nothing to worry about to buy it from HOMEWORK88 LLC. Buy it now, more you buy more you save from HOMEWORK88 LLC, Our goal is to provide you with the best quality product at the lowest price. Shipping Same day or 1 day handling time. If you order and pay it before 3pm most of time it will going to be same day delivery after that before 11:45pm your order will be ready to ship tomorrow morning. It will going to be USPS 1-3 PRIORITY MAIL with insurance and tracking numbers. (USPS will be close Saturday at 12:30pm and Sunday) .. 1/2

10 PIECES 3/4″ PUSH FIT X 3/4″ FNPT FEMALE THREADED ADAPTER

You are buying lot of 10 pieces 3/4″ push fit x 3/4″ FNPT female threaded adapter. These are lead free and certified to ANSI/NSF-61HOMEWORK88 LLC we will give our customers 30 days to try out ours confident products, if some how you don’t like it you can mail it back to us we will refund your money back with no question ask, NO restocking fees and even pay for your return shipping fees. If you like it please leave A++ to our feedback, Thank You for your support. You have nothing to worry about to buy it from HOMEWORK88 LLC. Buy it now, more you buy more you save from HOMEWORK88 LLC, Our goal is to provide you with the best quality product at the lowest price. PLEASE VISIT OUR EBAY STORE FOR MORE PRODUCTSShipping Same day or 1 day handling time. If you order and pay it before 3pm most of time it will going to be same day delivery after that before 11:45pm your order will be ready to ship tomorrow morning. It will going to be USPS 1-3 days Priority with insurance and tracking numbers. (USPS will be close Saturday at 12:30pm and Sunday) The Push-Fit connection system it’s the easiest and fastest way to join copper, CPVC or PEX pipe in any combination – with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. Just push connect by hands, within 1 minutes to finish installation, makes our life more efficient, fast, save time and strength and your money. Disassembly is just as fast using the simple disconnect tool. So fittings and valves can be easily changed and reused. They can even be rotated after assembly for easier installation in tight spaces. Get a grip on your next plumbing project.Instant Push-Fit connection for increased ease-of-use.No soldering, clamps, unions, or glue required.Fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination.Integral tube liner for PEX installations, so no loose components, ensures secure, reliable connection.Design certified and agency listed.Compact, robust LEAD FREE brass body. Foundation of a strong, corrosion resistant, durable fitting.Design certified to ANSI/NSF-61 and ASSE 1061 product standard.Approved to be used underground and behind walls without access panels.Max presure: 200psiMax temperature: 200F

10 Pcs. 1/2″ Pex X 1/2″ Female Swivel Adapter, 1/2″ Pex Female Swivel 25-2-1=10

You are buying lot of 10 PIECES 1/2″ PEX X 1/2″ FEMALE NPT THREADED SWIVEL ADAPTER BRASS – CRIMP FITTING (LEAD FREE) These are lead free and certified to ANSI/NSF-61 HOMEWORK88 LLC we will give our customers 30 days to try out ours confident products, if some how you don’t like it you can just mail it back to us we will refund your money back with no question ask. And if you like it please leave A++ to our feedback, Thank You for your support. You have nothing to worry about to buy it from HOMEWORK88 LLC. Buy it now, more you buy more you save from HOMEWORK88 LLC, Our goal is to provide you with the best quality product at the lowest price. PLEASE VISIT OUR EBAY STORE FOR MORE PRODUCTS Compatible with all types and brands of PEX B Tubing:WattsEverhotViegaZurnNibcoBowetc.Connection SystemsCrimp Connection System (PEX Crimp tool + Copper Crimp Rings)Clamp Connection System (PEX Clamp tool + Stainless Steel PEX Clamps)Design certified and agency listed.Compact, robust LEAD FREE brass body. Foundation of a strong, corrosion resistant, durable fitting.Design certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution.Approved to be used underground and behind walls without access panels.Designed for hydronic heating as well as potable water distribution.200 PSIShipping Same day or 1 day handling time. If you order and pay it before 3pm most of time it will going to be same day delivery after that before 11:45pm your order will be ready to ship tomorrow morning. It will going to be USPS 2-3 days First Class mail with insurance and tracking numbers. (USPS will be close Saturday at 12:30pm and Sunday) FIR $6.95

10 Pieces 1/2″ Press Ball Valve, Lead Free Brass, Full Port

You are buying lot of 10 Pieces 1/2″ Press Ball Valve, Lead Free Brass, Full Port, Certified to ANSI-61/NSF HOMEWORK88 customers have 30 days to test out our products, and if for some reason you don’t like them, you may ship them back to us, and we’ll refund your full money without any hassle. And if you like it, please give us an A++ in the feedback section. You can purchase it from HOMEWORK88 without any worries. Purchase it right away and take advantage of HOMEWORK88 LLC’s volume discounts. We strive to offer you the highest-quality goods at the most competitive prices. PLEASE VISIT OUR EBAY STORE FOR MORE PRODUCTSConnection: 1/2″ Press Fit x 1/2″ Press FitPressure: 250 CWPFull Port1/4″ TurnBlow Out Proof StemUsed with Ridgid, Milwaukee, Dewalt & Rothenberger toolsCompact, robust Lead Free Brass Body, Foundation Of a Strong, Corrosion Resistant, Durable FittingDesign certified to ANSI-61/NSF product standard for use in potable water and hydronic heating water distribution.Shipping One day or the same day for handling. Most of the time, if you place your order and pay for it before 3 pm EST, it will be delivered the same day. If you do so before 11:45pm, your order will be prepared for shipment the following morning. It will be sent by USPS 1-3 Days Priority Mail with tracking information and Insured. (USPS will be close Saturday at 12:30pm and Sunday)