Ultra Custom Pools

Item Tag: Strainer

3pcs 8.3*6.3cm Kitchen Sink Strainer Stopper Stainless Steel Drain Basket Waste

This product is a set of 3 round kitchen sink stoppers made of stainless steel, measuring 8.3*6.3cm. They are designed to fit into the drain basket, serving as a strainer to prevent water from escaping. The stainless steel material ensures durability and resistance to rust, making them a reliable choice for long-lasting use in your kitchen. Perfect for adding a modern touch to your kitchen plumbing while also serving their practical purpose.

IMI TA Flanged Ductile Iron Balancing Valve Designed In Sweden

The IMI TA Flanged Ductile Iron Balancing Valve is a high-quality product designed by the Swedish brand Apollo. Made from durable bronze material, this balancing valve is equipped with a strainer for added filtration. Its flanged design allows for easy installation and maintenance, making it a reliable choice for controlling and regulating fluid flow in various systems.

Set of 3/4 Top / Bottom FRP Distributors for FLECK Water Softener 1.05″ Strainer

1. Top distributor 3/4″ F0601, 0.25mm slots Prevents resin loss during backwash. The Fleck 18280 is an upper media screen (aka Top Collector) for the Fleck 5600 and 2510 product platforms. It counter-clockwise twist-locks to the bottom of the control valve and receives a standard 1.05″ OD riser tube. Known analogues:Top 1.05 Twist On Basket Strainer 1.05 O.D. DistributorFLECK UPPER MEDIA SCREEN (18280)FL18280-01 Top Collector, Bayonet, 1.05″ X .020 (White)Fleck FL18280 COLLECTOR, TOP, 1″ X .011. (Grey) Twist-on style. Used for most Fleck Residential Valves, as well as Legacy and Runxin Residential Valves.TDB1050-FMBS, Fleck 5600 Top Bskt, 1.050 FM, 18280-02Supplier Part #: 18280-02 Fleck 5600 Top Bskt, 1.050 FM Fleck 5600 Top Basket, 1.050″ Fine MeshBoth Top/Bottom Distributor are high-efficiency Filtration Water Softeners Parts. 2. Bottom distributor 3/4″ F0602, 0.25mm slotsPrevents resin loss during Service. The F0602 is an lower media screen (aka Bottom Collector) for any 1.05″ (3/4″) product platforms. It fits a standard 1.05″ OD riser tube, glue-locks to the bottom side of the dip-pipe.Lower distributor 3/4″ F0602, 0.25mm slots1.05 inch O.D. Bottom Distributor .010″ – .013″ slotsUsed to make Distributor Tube with a piece of 3/4″ SDR21 PVC Pipe ( gluing the distributor to the PVC pipe with PVC Cement ).This 1.05″ O.D. pipe size is used on all new residential valves.Some older valves used the 13/16″ O.D. tubes, but you can still use the larger 1.05″ distributor and adapt to your old valve by gluing ( use PVC Cement ) a 6″ section of your old 13/16″ tube into the center of a piece of 3/4″ PVC pipe that is Schedule 40.You don’t use a “coupler”, but the actual pipe, 3/4″ Schedule 40 PVC used with the MD1236, since the INNER diameter matches the OUTER diameter of the 13/16″ pipe it will fit tightly inside the new 3/4″ PVC ( must be Schedule 40 ). Your old distributor pipe can usually be a guide to the length or height your new pipe will need to be ( And it must be Touching the Bottom of the Tank ).If the Valve is a Fleck 5600, then you will need the new tube to be equal to the top of the resin tank ( not more than 1/4″ above ).It is helpful to “round” or “smooth” the top edges of the new PVC pipe with sand paper so that insertion into the valve does not damage the distributor o-ring in the valve body. Both Top/Bottom Distributor are high-efficiency Filtration Water Softeners Parts.

Kitchen Sink Drain Kit for Standard 3-1/2 inch Drain – Fit 1-1/2 inch Pipe

Replace or upgrade your kitchen sink drain with this 3-1/2″ Kitchen Sink Drain Kit, designed for standard sinks and 1-1/2″ drain pipes. The kit features a stainless steel basket strainer with a convenient knob, while the drain pipe and fitting are durable plastic, and the rubber stopper provides a tight seal.