Ultra Custom Pools

Item Tag: style 1

Antique Style Furniture Knobs DRAWER KNOBS Victorian Knob Cabinet Knob 1-3/8″

Add a new level of distinction to your cabinets and furniture with this Standard Victorian-Style Ebonized Wood Knob. It features a decorative antiqued brass on lay with an intricate, Eastlake design in an unlacquered finish.· Made From Real Wood and Brass· Antiqued Brass Finish for · Historic Pattern Appropriate for Restoration Dimensions: 1 3/8″ D. Projection: 1 1/4″. Check out my other items! Be sure to add me to your favorites list! Shipping: Please contact us before ordering multiple items to save on shipping, or place your purchase(s) in cart and request total from seller or an invoice. Ordering more than one item from us can be combined for the one time shipping charge. Ordering 1 – 8 will be shipped first class. Ordering 9 – 16 will be shipped in a flat rate box and charged the flat rate. We use flat rate shipping envelopes or boxes, if ordering larger quantities we would use a larger flat rate box and charge you that rate. We don’t inflate our prices to cover shipping cost; our prices are low compared to other mail order catalogs. Need less or more: Do you need more or less than the lot size? Contact us and we will accommodate you. Need additional quantities: We can special order additional quantities. Just contact us and we will make sure the item is available and the time frame for shipping to you. Need it faster: Just let us know and we can use express shipping if needed. Center to Center boring? Ordering an item that has center to center measurement on furniture drop pulls, (example we list an item 3” center to center, middle of one hole to the middle of other hole) and don’t see your size, contact us and we may be able to offer a solution. Right hand or left hand: Latch is right hand if hinges are on the right. Latch is left hand if hinges are on the left. View both by facing cabinet. Items are reproduced unless otherwise noted. Returns accepted within 14 days, buyer pays shipping; special ordered items are not returnable.

TODCO Style Roller-Box Truck-Trailer Overhead Roll Up Door-1″ ROLLERS- 2 -500PCS

TODCO Style Door Roller-Box Truck-Trailer Overhead Roll Up Door-1″ ROLLERS -2-500 PCS Dan’s Truck Equipment (4one9-eight seven 4 twenty two forty nine)Business Hours-Shop/Sales/Office8am-5pm Monday-Friday Dan’s Truck Equipment specializes in used truck and trailer sales, full line trailer rental, autobody, truck and trailer repair shop. We are a truck equipment, grain body, hopper trailer, dump body, snow plow and snow plow parts dealer. We do specific orders and we specialize on installations also of grain bodies, dump bodies, hook lifts, and pto systems. $5.00 restocking fee on internet sales, call us if you are not sure what you need, thank you.

Custom Handmade My Hero Academia Style #1 Single Toggle Light Switch Cover

I’m selling Custom Handmade My Hero Academia Style #1 Single toggle light switch cover. Many other types of light covers available. If interested in a different style contact me through Ebay and I will make a listing for the item for purchase. Shipping within the United States is included in price International order will pay additional shipping charge.

(1) 3/4″ SHARKBITE STYLE PUSH FIT COPPER PEX CPVC COUPLING LEAD FREE Push’N’Con

(1) 3/4″ SHARKBITE STYLE PUSH FIT COPPER PEX CPVC COUPLING Push’N’Connect LEAD FREE Push to Connect (Push-Fit) Coupling is intended to connect two CTS pipes together in a straight line. For use with 3/4″ CTS (7/8” OD) PEX, copper, CPVC and PE-RT pipes.Lead-free DZR (dezincification resistant) brass, approved for potable water use nationwide.NSF/ANSI 14, 61 & 372, ASSE 1061 listed.cUPC (Uniform Plumbing Code) listed.Rated up to 100 psi at 180°F for continuous use.(2) PEX insert/stiffeners included.Replaces SharkBite, TecTite, ProBite and other push fitting brands. Advantages of push fittings:No crimp/clamp/soldering tools required.No crimp rings or clamps required.No need to gauge connections for accuracy.No soldering needed (and no open flame).No gluing.Easily transition between PEX, copper and CPVC.Faster and easier than any common connection method. Installation with PEX tubing:Make a clean and square cut using a plastic pipe cutter.Mark insertion depth using U702 tool or measuring tape (see chart below).Fully insert pipe into the fitting and check the insertion depth. Installation with Copper pipe:Cut the pipe using a standard copper pipe cutter (do not use hacksaw or band saw).Ream the outside and inside of the copper pipe to smooth out its edge (use U702 or similar tool).Mark insertion depth using DT1234 or measuring tape (see chart below).Remove the PEX insert from the fitting using a CDT12 or CDT34 and needlenose pliers.Fully insert pipe into the fitting and check the insertion depth. Installation with CPVC pipe:Cut the pipe using a standard pipe cutter. If using a hacksaw – ream the pipe’s edges.Mark insertion depth using DT1234 tool or measuring tape (see chart below).Remove the PEX insert from the fitting using a disconnect clip and needlenose pliers.Fully insert pipe into the fitting and check the insertion depth. Pipe insertion depth chart:Pipe Size (CTS/Nominal)Pipe Size (OD)Insertion Depth1/4″3/8″13/16″3/8″1/2″15/16″1/2″5/8″15/16″3/4″7/8″1-1/8″1″1-1/8″1-5/16″ To disconnect: Use disconnect clip of size corresponding to CTS pipe size. Snap the clip over the pipe near the fitting and push it down on the innermost collar of the fitting (which comes in contact with the pipe), while simultaneously pulling the pipe and fitting apart. DO’s: Always pressure test the system after installation Cut the pipe gradually. With copper pipe especially, excessive force may deform otherwise round pipe shape. If using with copper pipe, reaming is a must – it will prevent damage to the O-ring from abrasive edges. PEX insert is required when installing the fitting on a PEX pipe. DONT’s: Do not sand the pipe or apply any kind of glue or sealing tape. Do not install in glycol containing systems (i.e. snow/ice melting systems). Do not re-use fittings on different connections. Do not use on soft and rolled copper – only hard drawn standard K, L, M copper pipes. Note: push fittings are not compatible with PEX-AL-PEX, PB (PolyButylene), PVC pipes and cannot be used for air/gas/oil applications. Buyer pays shipping and handling price as shown in eBay’s Shipping & Payment detail section.Some items we ship to US only, some of them to US, Canada and Worldwide. The larger items can be shipped to Canada and Worldwide (see info at the top of the listing for ‘Ships to’ locations).Item will be shipped to the shipping address you provide during checkout. If you wish to ship to a different address you must contact us by email right after making your payment (10 minutes).Items are normally shipped the same or next business day after receiving cleared payment (normally M-F except holidays).If paying by PayPal eCheck, we will ship as soon as funds clear the account.The estimated delivery date shown above is only an estimate inserted by eBay based on shipping methods. These are not guaranteed. We can not guarantee you will receive the item by that date, we can only guarantee that we will ship quickly. After that it is in the hands of the US Postal Service.US Addresses – Our Standard Flat Rate Shipping is normally by USPS Priority Mail (or 1st Class mail). We may also use FedEx for larger items at our discretion.Canada and Worldwide – We offer USPS First Class Mail International and Priority Mail International.Tracking is not available for abroad USPS First Class Mail shipments. We can provide only customs number for USPS First Class International. Please keep in mind that USPS First Class Mail can take several weeks to arrive.Packaging – some items may have their display removed and discarded for ease of shipping.Also we may remove an item from its original box/package and ship it in a new box/envelope (also for ease of shipping or to improve packaging). We accept PayPal only.We no reserve the items if payment is not received right after the auction ended.No local pick up service.Sales taxes would be charged for items shipped to NY (8.875%). Return PolicyIf defective upon receipt, please contact us by email within 14 days for refund or replacement arrangements.If you do not like the item, you may return it and we will refund the purchase price (shipping & handling is not refundable).The item must be returned in new condition within 14 days for a refund.Buyer pays return shipping costs. International Buyers – Please NoteImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up. Please, do not confuse them for additional shipping charges.

1 Set Dashboard Air Conditioner Vent – Round AC Air Outlet Vent for 3 Style 1

MATERIAL — This car air conditioning vent is made of quality ABS material, strong and durable, without odour. COMFORT — The honeycomb row of holes and louvered cover allow for even airflow to the air conditioner and you can adjust the angle that works best for you so that the airflow goes in the direction you want.

Custom Handmade Calvin & Hobbs Single Toggle Light Switch Cover

Im selling Custom Handmade Calvin & Hobbs Single toggle light switch cover. Many other types of light covers available. If interested in a different style contact me through Ebay and I will make a listing for the item for purchase. Shipping within the United States is included in price International order will pay additional shipping charge.