Ultra Custom Pools

Item Tag: Torsion Spring

Garage Door Torsion Springs PAIR .218 x 2″ ID x Select Length – USA MADE*

This Listing is for One Pair of .218 X 2″ (select the length) Quality, USA Made*, Oil Tempered and Coated Garage Door Torsion SpringsPlease Read The Complete Listing Below For Our Step By Step Instructions on How to Properly Measure Torsion Springs to Ensure the Proper Springs Are Ordered.Includes one Pair of Springs (1 Right Wound, and 1 Left Wound)1 Replacement Center Bushing or Bearing and Option to Buy Winding Rods are Available by Selecting From the Dropdown List.Wire size is .218, Inside Diameter is 2″, length is selected in the drop-down list (Additional Lengths are Available, Message Us for Quote)Springs are Made of Oil Tempered USA Made Spring Steel, and are coated to resist rust, and for longer lifeProperly sized and installed springs are rated minimum 10,000 cyclesThese Springs are manufactured by One of the Largest OEM Spring Suppliers, The Aluminum Winding And Stationary Cones are Included, And Are Pre-Installed. (*Cones are Imported)2 year Limited Warranty Against Premature Breakage **Cycle Rating is dependent on the springs being properly sized for the door and the correct amount of turns put on the springs for the door height. Technical and Installation Support is Available by Phone or Email. How to select the correct spring (Please Read the Below Instructions Entirely Before Placing an Order)First of all it is very important to have the correct spring for your door, if the spring is not matched correctly to the door, it will not work properly and can be dangerous or damage your operator. Make sure that you measure the spring correctly and if you have questions, please message us before ordering. Step 1. is to measure the wire diameter. To do this you will need to measure 10 coils then compare that measurement to the chart below to see the wire size. Double check by measuring 20 coils and compare to the 20 coil measurement. If the 2 measurements do not match, try measuring in a different area of the spring and also make sure the spring is not stretched (no gaps between the wires). Do not take your measurements on the ends where the wire goes over the cones are. The cones tend to stretch the wire apart causing gaps between the wires. Any gaps between the wires will not give an accurate measurement. 10-Coil Measurement 20-Coil Measurement Wire Sizeincmincm1 3/4″4.503 1/2″8.990.1771 7/8″4.763 3/4″9.530.1871 15/16″4.883 7/8″9.750.1922″5.084″10.160.2002 1/16″5.264 1/8″10.520.2072 3/16″5.554 3/8″11.110.2182 1/4″5.724 1/2″11.450.2252 5/16″5.954 5/8″11.900.234 2 7/16″6.194 7/8″12.380.2432 1/2″6.355″12.700.2502 5/8″6.675 1/4″13.340.2622 3/4″6.935 1/2″13.870.2732 13/16″7.195 5/8″14.380.283 Step 2 is to determine the spring inside diameter (ID). If the spring is broken you can simply use a ruler to measure the inside of the broken end. If the spring is still in one piece you can measure the outside and deduct the wire size X 2. You also may be able to find stampings on the cones which will help determine the ID; for instance P200 or P2000 will be stamped on the cones for a 2” ID and P175 for a 1 3/4″ ID. The most common sizes in residential springs are 1 3/4″ and 2″ (Raynor doors use a 2 ¼” ID). Step 3 is to measure the length of the spring. Measure the spring only; do not include the winding and stationary cones. If the spring is broken, measure each piece and add the two measurements together to get the total length. If the spring is still in one piece and still wound, it will be longer by 2-3” than when it is relaxed. The proper way to measure for the length is to unwind the spring and then measure. Step 4 is only important if ordering a single spring. You will need to determine the wind direction of the spring (right hand wind {RW}) or left hand wind {LW}). Look at the third photo on this listing for an example of the two different spring wind directions. This is probably the most confusing part of the spring ordering process, as The RW is normally on the Left side and the LW is normally on the Right side. Be sure to check the wind direction and not make assumptions. If you look at the end of the spring and compare to the third picture on the listing you will be able to determine the correct wind direction. We are a Pro Garage Door Installation and repair Company. We carry many repair parts for many different brands of doors. If you are looking for a part and we don’t have it listed, just message us through eBay and we’ll quote a price and set up a listing for you through eBay. CAUTION: Installing or repairing a garage door can be dangerous task. Garage door springs and cables are under extreme tension and require appropriate safety precautions. Working with garage doors and openers could result in personal injury or death. We recommend all installations, repairs, adjustments, and removals on garage doors be made by a qualified garage door technician. Any attempts to install, repair, replace, adjust garage doors or openers are done at your risk. In no event shall M. C. Overhead Door parts division be liable for damages of any kind, personal injury or death. User assumes all responsibility/risk for use of information and products purchased. By purchasing our products you agree to these terms. RETURN POLICY Returns are accepted within 30 days of the date that the item is received.We don’t offer exchanges. If a different item is needed, the item not needed can be returned and another item purchased. Buyer is responsible to pay for the return shippingIf an item is listed with ‘free shipping’, a 20% restocking fee will be deducted from the refund amount. All items MUST be returned in the same condition as they were when you received them. If an item is returned damaged or in any way visibly used, an additional deduction will be taken from the refund amount.

1 Pair High Quality Hex Commercial Garage Door Torsion Spring Winding Bars 24 In

High Quality Hex Commercial Garage Door Torsion Spring Winding Bars Set of Two (2) 24 InchesUsed to wind commercial garage door torsion springs 11/16″ hexed 24″ steel with 5/8″ and 1/2″ machined ends Will not roll off of ladder or platform Sold as a pairWARNING: Torsion springs, extension springs, and related door hardware can cause serious injury or death if not handled and installed properly. Professional installation is recommended. Do NOT attempt to install springs or hardware yourself unless you have the proper tools, reasonable mechanical aptitude and experience, and upper arm strength. Read and understand all instructions before you begin work. Extension and torsion springs, along with attached hardware, are under extreme tension at all times. All tension must be released from springs before any work is performed. About Us We are a garage door wholesaler. We carry a wide selection of parts for all brands. We are continually looking to add new parts to our inventory. If you need a part you do not see just ask. Contact Us Please feel free to contact us using eBay messages with any questions, comments or concerns. We will reply as soon as possible. Make sure to include as much information as possible like model numbers. Returns Your order may be returned within 30 days of the sale date. Shipping is not refundable. Returns with free shipping will have the actual shipping cost deducted from the refund. Shipping We pride ourselves with fast shipping. Most orders placed by 3PM CST ship the same day. Some products require additional prep time. Use the shipping and payments tab to see available shipping services and cost. We recommend picking Priority Mail and UPS services which are all insured. First class mail is not insured. Track Page Views With Auctiva’s Counter

Garage Door Torsion Spring Winding Bars Set of Two (2) 18 Inches

Garage Door Torsion Winding Bars Set of Two (2) 18 inches Description: Includes set of two (2) 18 inch long with 1/2 inch end and 7/16 inch machined end winding rods used to install most residential torsion springs. WARNING: Torsion springs, extension springs, and related door hardware can cause serious injury or death if not handled and installed properly. Professional installation is recommended. Do NOT attempt to install springs or hardware yourself unless you have the proper tools, reasonable mechanical aptitude and experience, and upper arm strength. Read and understand all instructions before you begin work. Extension and torsion springs, along with attached hardware, are under extreme tension at all times. All tension must be released from springs before any work is performed. About Us We are a garage door wholesaler. We carry a wide selection of parts for all brands. We are continually looking to add new parts to our inventory. If you need a part you do not see just ask. Contact Us Please feel free to contact us using eBay messages with any questions, comments or concerns. We will reply as soon as possible. Make sure to include as much information as possible like model numbers. Returns Your order may be returned within 30 days of the sale date. Shipping is not refundable. Returns with free shipping will have the actual shipping cost deducted from the refund. Shipping We pride ourselves with fast shipping. Most orders placed by 3PM CST ship the same day. Some products require additional prep time. Use the shipping and payments tab to see available shipping services and cost. We recommend picking Priority Mail and UPS services which are all insured. First class mail is not insured.

Garage Door Torsion Spring Winding Bars Set of Two (2) 18 Inches

Garage Door Torsion Winding Bars Set of Two (2) 18 inches Description: Includes set of two (2) 18 X 1/2 inch winding rods used to install most residential torsion springs. Spring cones must have 1/2 inch holes. WARNING: Torsion springs, extension springs, and related door hardware can cause serious injury or death if not handled and installed properly. Professional installation is recommended. Do NOT attempt to install springs or hardware yourself unless you have the proper tools, reasonable mechanical aptitude and experience, and upper arm strength. Read and understand all instructions before you begin work. Extension and torsion springs, along with attached hardware, are under extreme tension at all times. All tension must be released from springs before any work is performed. About Us We are a garage door wholesaler. We carry a wide selection of parts for all brands. We are continually looking to add new parts to our inventory. If you need a part you do not see just ask. Contact Us Please feel free to contact us using eBay messages with any questions, comments or concerns. We will reply as soon as possible. Make sure to include as much information as possible like model numbers. Returns Your order may be returned within 30 days of the sale date. Shipping is not refundable. Returns with free shipping will have the actual shipping cost deducted from the refund. Shipping We pride ourselves with fast shipping. Most orders placed by 3PM CST ship the same day. Some products require additional prep time. Use the shipping and payments tab to see available shipping services and cost. We recommend picking Priority Mail and UPS services which are all insured. First class mail is not insured.

High Quality Hex Garage Door Torsion Spring Winding Bars Set of Two 18 Inches

High Quality Hex Garage Door Torsion Spring Winding Bars Set of Two (2) 18 InchesUsed to wind residential garage door torsion springs1/2″ hexed 18″ steel with 7/16″machined end, other end slightly smaller.Will not roll off of ladder or platformSold as a pairWARNING: Torsion springs, extension springs, and related door hardware can cause serious injury or death if not handled and installed properly. Professional installation is recommended. Do NOT attempt to install springs or hardware yourself unless you have the proper tools, reasonable mechanical aptitude and experience, and upper arm strength. Read and understand all instructions before you begin work. Extension and torsion springs, along with attached hardware, are under extreme tension at all times. All tension must be released from springs before any work is performed. About Us We are a garage door wholesaler. We carry a wide selection of parts for all brands. We are continually looking to add new parts to our inventory. If you need a part you do not see just ask. Contact Us Please feel free to contact us using eBay messages with any questions, comments or concerns. We will reply as soon as possible. Make sure to include as much information as possible like model numbers. Returns Your order may be returned within 30 days of the sale date. Shipping is not refundable. Returns with free shipping will have the actual shipping cost deducted from the refund. Shipping We pride ourselves with fast shipping. Most orders placed by 3PM CST ship the same day. Some products require additional prep time. Use the shipping and payments tab to see available shipping services and cost. We recommend picking Priority Mail and UPS services which are all insured. First class mail is not insured. Track Page Views With Auctiva’s Counter

RIGHT Wind Garage Door Torsion Spring .225 x 2″ ID x Any Length Winding Bars

Torsion springs are the most common type of springs used on garage doors. It is critical to have the correct size springs in order to maintain a properly balanced garage door. Torsion Spring. WARNING: Torsion springs, extension springs, and related door hardware can cause serious injury or death if not handled and installed properly.

RIGHT Wind Garage Door Torsion Spring 225 x 1-3/4″ ID x Any Length

Torsion springs are the most common type of springs used on garage doors. It is critical to have the correct size springs in order to maintain a properly balanced garage door. Torsion Spring. WARNING: Torsion springs, extension springs, and related door hardware can cause serious injury or death if not handled and installed properly.

.262 x 2″ x 45″ LEFT Wind Garage Door Torsion Spring w/wo Winding Bars

Torsion springs are the most common type of springs used on garage doors. It is critical to have the correct size springs in order to maintain a properly balanced garage door. Torsion Spring. WARNING: Torsion springs, extension springs, and related door hardware can cause serious injury or death if not handled and installed properly.