EPEVER MPPT Solar Charge Controller 30A Tracer3210AN + Remote Meter MT50+RTS
☀Tracer3210AN 12V/24V battery system auto identifying. Max Input 100V. Max.PV input power:12V/390W,24V/780W. Note: Be sure to connect the battery first, pay attention to the positive and negative wiring. ☀The Tracer-AN charging process has been optimized for long battery life and improved system performance.It includes a 4-stage battery charging (Bulk, Boost, Float, and Equalization) and temperature compensation increase your battery life. Four load control modes: manual mode, light ON/OFF, light On+ Timer and test mode . ☀Support for 4 type Battery charging and dischargeing: Lead-acid (Sealed, Gel, Flooded), Lithium/lifepo4 and User-defined. Compatible with AGM batteries, User mode allow you set your own charging parameters. Battery temperature compensation function（only for Lead-acid battery). ☀Supports PC(only Windows) monitors and Remote Meter MT50 for real-time data viewing and parameter setting. ☀The wiring steps: 1.Battery>> 2.Load>> 3.Solar Panel. Pay attention to the positive and negative wiring.
EPEVER MPPT Solar Charge Controller 30A Tracer3210AN + Remote Meter MT50+RTS
☀Tracer3210AN 12V/24V battery system auto identifying. Max Input 100V. Max.PV input power:12V/390W,24V/780W. Note: Be sure to connect the battery first, pay attention to the positive and negative wiring. ☀The Tracer-AN charging process has been optimized for long battery life and improved system performance.It includes a 4-stage battery charging (Bulk, Boost, Float, and Equalization) and temperature compensation increase your battery life. Four load control modes: manual mode, light ON/OFF, light On+ Timer and test mode . ☀Support for 4 type Battery charging and dischargeing: Lead-acid (Sealed, Gel, Flooded), Lithium/lifepo4 and User-defined. Compatible with AGM batteries, User mode allow you set your own charging parameters. Battery temperature compensation function（only for Lead-acid battery). ☀Supports PC(only Windows) monitors and Remote Meter MT50 for real-time data viewing and parameter setting. ☀The wiring steps: 1.Battery>> 2.Load>> 3.Solar Panel. Pay attention to the positive and negative wiring.
EPEVER MPPT Solar Charge Controller 40A 12V/24V , 520W/1040W XTRA4210N-XDS2
Newest EPEVER MPPT Solar Charge Controller 40 Amp 12V/24V DC auto work ,Max PV 100V , Solar Panels Max input 520W charging for 12V battery system or 1040W charging for 24V battery system, Common negative grounding. Applicable battery types : Lead-acid (Sealed / Gel(AGM) / Flooded) ; Lithium(LiFePO4, Li[NiCoMn]O2) ; User . Technical Data: Model: XTRA4210N-XDS2 (Upgraded version)Rated charge and discharge current :40 AmpMPPT Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%Nominal system voltage:12V/24V DC auto work (When selecting lithium battery, recommend to set the system voltage as right Lithium type)Max. PV input power: 520W charge for 12V battery system or 1040W charge for 24V battery system Max. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)Support Battery types : Lead-acid battery :Sealed / Gel(AGM) / Flooded/User (AGM battery parameters default same as GEL , or setting more accurate as factory advice parameters by USER type ) ; Li-ion battery:LiFePO4 (4s/12V; 8s/24V) / Li (NiCoMn)O2 (3s/12V; 6s/24V) / User .Battery voltage range : 8～32VMPP voltage range:V(BAT+2V)～72VGrounding : Common negative groundingRS485 interface: 5VDC/200mA (RJ45)Working environment temperature : -25℃～+50℃Storage temp. range: -20°C — +70°C/-4°F — 158°FLCD backlight time : 60S (Default)Controller Terminals:#6AWG(16mm2) ; Recommended Wire cable:#8AWG(10mm2)Mounting hole size:Φ5mmDimension:255*185*67.8mm ; weight :1.70 KG EPEVER XTRA-N series mppt solar charge controller is upgraded version than Tacer-AN series , Better functions and advanced design . Added Features than Tracer-AN series : Applicable battery types : Lead-acid (Sealed / Gel(AGM) / Flooded) ; Lithium(LiFePO4, Li[NiCoMn]O2) ; User .Adanced Display unit (XDS2) : Three LED Indicators + Bigger LCD display: PV/Battery/Load parametersAdd five buttons for parameters setting & monitoring , More Safety Protection Functions.Battery types: Sealed (default)/ Gel/ Flooded ,LiFePO4 (4s/12V; 8s/24V), Li (NiCoMn)O2 (3s/12V; 6s/24V),(default parameters); or User (9～34V) could be setting by controller buttons ; more details parameters setting need EPEVER accessories : MT50 , WiFi adapter , BLE adapter, eLOG01, PC software ;We have prepared Amazon listing video tutorials about how to use the controller and how to set parameters . More questions please feel free to ask vendor { Goland Century } first . Step: Connect solar system in the order of 1.battery–> 2. load–> 3.PV array ; and disconnect solar system in the reverse order 3. 2. 1. Battery must be connected with controller first ! Never connect soalr panel array to controller Without/Before connect battery.DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.) Note: The following accessories are not included in controller box , you could check and purchase accessories separately .
EPEVER 20A MPPT Solar Charge Controller 12V 24V Auto Max PV 100V Tracer2210AN
(2022 Upgraded Version ) EPEVER MPPT Solar Charge Controller 20 Amp ,12V/24V DC auto work . Solar Panels Max PV 100V , Max input 260W for 12V battery or 520W for 24V battery , Common negative grounding. Suitable for Lead-acid (Sealed / Gel(AGM) / Flooded); Lithium(LiFePO4 (4s/12V; 8s/24V), Li (NiCoMn)O2 (3s/12V; 6s/24V)) and User-defined .Technical Data:Model: Tracer2210ANRated charge and discharge current :20 AmpNominal system voltage:12V/24V DC auto workMax. PV input power: 260W charge for 12V battery system / 520W charge for 24V battery systemMax. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)Battery type :Lead-acid: Sealed (default)/ Gel/ AGM/ Flooded / User (9～17V@12V; 18～34V@ 24V) , Lithium: LiFePO4 (4s/12V; 8s/24V), Li (NiCoMn)O2 (3s/12V; 6s/24V), User (9～34V) and User-defined. (AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type )Battery voltage range : 8～32VMPP voltage range:V(BAT+2V)～72VGrounding : Common negativeTracking efficiency : ≥99.5% , Max. conversion efficiency :98%Working environment temperature : -25℃～+50℃(100% input and output)Temperature: -20°C — +70°C/-4°F — 158°FLCD backlight time : 60S (Default)Controller Terminals:#6 AWG(16mm2) ; Recommended Wire cable:#10 AWG(6mm2)Dimension:220*154*52mm ; weight :0.94 KGPackage List:1 X 20A MPPT Solar Charge Controller (Model: Tracer2210AN )1 X Temperature sensor unit for controller（Model: RT-MF58R47K3.81A）1 X Manual (English)Note :Our warehous in RANCHO CUCAMONGA ,CA, our professional engineer local team supply solar system solutions and tech-support services for you in time .2022 EPEVER Tracer-AN series mppt solar charge controller is new upgraded version , Better funcations and advanced technology .Added Features :Blacklight LCD Display ; More Safety Protection Functions;Compatible with lead-acid and lithium-ion type batteries too ;2022 Upgraded version support choose Lithium types by controller buttons directly . users can modify them on the local controller when the battery type is “USE.” for the BCV, FCV, LVD, and LVR, You could also contact with vendor services about more tech support .Product Features:Based on common negative design and Advanced MPPT technology, with efficiency no less than 99.5%,Ultra-fast tracking speed and tracking efficiency ;With the adaptive three-stage charging mode based on digital control circuit, Tracer-AN series controllers can effectively prolong the life-cycle of battery and significantly improve the system performance. The load, utility or generator auto-control relays make it easy to compose the hybrid power system;All-around electronic protections, including overcharging, over discharging, PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for longer service time;The isolated RS485 interface with standard MODBUS communication protocol, easy for customer to monitor and set the parameters via mobile phone APP or PC software;This modular solar controller can be widely used for different applications, e.g.solar RV, Communication base stations, household systems, and field monitoring, etc.Protection function :•PV Over Current/power protection • PV Short Circuit protection • PV Reverse Polarity protection• Night Reverse Charging protection • Controller Overheating protection• Battery Reverse Polarity protection • Battery Over Voltage protection• Battery Over Discharge protection • Battery Overheating protection• Lithium Battery Low Temperature protection• Load Short Circuit protection • Load Overload protection•TVS High Voltage Transients protectionStep: Connect solar system in the order of 1.battery–> 2. load–> 3.PV array ; and disconnect solar system in the reverse order >3. >2. >1.Battery must be connected first ! Never connect soalr panel array to controller Without/Before connect battery.DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.)How to program for Lithium Battery parameters？Via Remote Meter (Accessories needed: MT50)Via Phone APP [ Android or IOS], (Accessories needed：WIFI adapter or BLE adapter )Via PC Software (Accessories needed RS485 cable :CC-USB-RS485-150U ) , Software download : EPEVER official website or read in manual .Please watch tutorial videos or contact vendor to get more tech-support .
30A MPPT Solar Charge Controller 12V 24V 390W 780W EPEVER XTRA3210N LCD USB
EPEVER 20A MPPT Solar Charge Controller 12V 24V Auto Max PV 100V Tracer2210AN
This item is in excellent condition and fully functional. What you see pictured is what you will receive.
EPEVER MPPT Solar Charge Controller 30A 12V/24V , 400W/800W XTRA3210N-XDS2
EPEVER MPPT Solar Charge Controller XTRA series 30Amp 12V/24V DC auto work ,Max PV 100V , Solar Panels Max input 390W / 780W , Common negative grounding. Applicable battery types : Lead-acid (Sealed / Gel(AGM) / Flooded), User ; User-defined for Lithium(LiFePO4, Li[NiCoMn]O2) .Technical Data:Model: XTRA3210N-XDS2Rated charge and discharge current :30 AmpMPPT Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%Nominal system voltage:12V/24V DC auto work (When selecting lithium battery , you should choose right system voltage for Lithium type)Max. PV input power: 390W for 12V battery system / 780W for 24V battery systemMax. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)Support Battery types : Lead-acid : Sealed(default) ,Gel (AGM), Flooded, User ; User Defined (9~34V) for Lithium : LiFePO4, Li[NiCoMn]O2 .Battery voltage range : 8～32VMPP voltage range:V(BAT+2V)～72VGrounding : Common negative groundingRS485 interface: 5VDC/200mA (RJ45)Working environment temperature : -25℃～+50℃Storage temp. range: -20°C — +70°C/-4°F — 158°FLCD backlight time : 60S (Default)Controller Terminals:#6 AWG(16mm2) ; Recommended Wire cable:#8 AWG(10mm2)Mounting hole size:Φ5mmDimension:230*165*63mm ;weight :1.31 KGNewest EPEVER MPPT solar charge controller XTRA series is new upgraded version than Tacer-AN series , added Features :Adanced Display unit (XDS2) : Three LED Indicators + Bigger LCD display: PV/Battery/Load parametersAdd five buttons for parameters setting & monitoring , More Safety Protection Functions.Package List:1 X MPPT Solar Charge Controller 30A ( XTRA3210N-XDS2)1 X Temperature sensor unit for controller（Model:RT-MF58R47K3.81A）1 X Manual (English)Electronic Protections :Note : Our warehouse located in Chicago, IL, US , we professional team and engineer supply solar system solutions and support services for you in time .•PV Over Current/power protection • PV Short Circuit protection • PV Reverse Polarity protection• Night Reverse Charging protection • Controller Overheating protection• Battery Reverse Polarity protection • Battery Over Voltage protection• Battery Over Discharge protection • Battery Overheating protection• Lithium Battery Low Temperature protection• Load Short Circuit protection • Load Overload protection•Controller overheating protection•TVS High Voltage Transients protectionApplicable battery types : Lead-acid (Sealed / Gel(AGM) / Flooded), User ; User-defined for Lithium(LiFePO4, Li[NiCoMn]O2) .Battery types: Sealed (default)/ Gel/ Flooded ,LiFePO4 (4s/12V; 8s/24V), Li (NiCoMn)O2 (3s/12V; 6s/24V),(default parameters);User (9～34V) could be setting by controller buttons ; more parameters setting need EPEVER accessories : MT50 , WiFi adapter , BLE adapter, eLOG01, PC software ;We have prepared video tutorials about how to use the controller and how to set parameters . More questions please feel free to ask vendor first .Step: Connect solar system in the order of 1.battery–> 2. load–> 3.PV array ; and disconnect solar system in the reverse order 3. 2. 1.Battery must be connected with controller first ! Never connect soalr panel array to controller Without/Before connect battery.DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.)