CRL 29″ Window Channel Balance – 2830 or 28-3 FA2830
Product detailsChannel Depth5/8 Channel Length29 Channel Width9/16 Guides AttachedNo Number Stamped on Channel2830 or 28-3 Vent Weight Range16 To 23Product OverviewMeasures 5/8″ (16 mm) Depth, but Referred to as 1/2″ (13 mm) in the Trade10, 20, 30, 40, and 50 Weight Range Balances in Lengths from 13″ to 43″ (330 mm to 1.09 m)Each CRL FA Series 3/30 Weight Range Sash Balances requires one of several types of nylon guides to be riveted onto the top and bottom of the channel. Customers can mount the guides using Cat. No. H3740 Rivet Set Tool (sold separately), which mushrooms the rivet, giving it a very strong set.Guide Options are:FS290B, FS291B, FS292B, FS293B, FS294B, FS295B, FS296B, FS297B, FS298B, and FS299BOrdering Tips for FA Series Sash BalancesRemove the existing Channel Balance from the window. Measure the length of the metal channel only. Do not include the Guides. This measurement should be at full inch increments.NOTE: There have been a few window manufacturers that have used special 1/2″ (12.7 mm) increment channel lengths. These Channel Balances are not stocked, however they can be special ordered.Always look for the stamped or laser etched number on the back of the Channel Balance. This number will either be four numbers or two numbers and a letter. For example: 2710 or 27-2.Using the numbers on the back of the Channel Balance, refer to the chart. If you have a full 18″ (457 mm) length channel, and the corresponding number on the back of the Channel Balance is 1710 or 17-1, the corresponding CRL Cat. No. is FA1710.If you have a full 27″ length channel, and the number on the back of the Channel Balance is 2610 or 26-1, the corresponding Cat. No. is FA2610. The chart also includes a vent weight range. This range indicates the amount of sash weight that a pair of Channel Balances will hold. This range does not account for any excessive weatherstrip friction.
CRL 2830 Window Channel Balance with FS291BA Guides Attached FA2830G
Product detailsChannel Depth5/8 Channel Length29 Channel Width9/16 Guides AttachedYes Number Stamped on Channel2830 or 28-3 Vent Weight Range16 To 23Product OverviewChannel Sash BalanceNon-Winged Guides Pre-InstalledCRL FA Series Sash Balance with FS291BA Guides pre-attached to the channel. No more waiting to have the guides riveted on. This balance is in stock with guides factory installed. This balance is also stock with Winged FS293BA Guides attached.