Ultra Custom Pools

Item Tag: Windy Nation Inc

P30L LCD 30A Solar Panel Regulator Charge Controller 12V 24V 390W 780W

WindyNation P30L 30A Solar Charge Controller with LCD Digital Display Settings are user adjustable! Technical Specifications Physical Specifications Includes Battery Temperature Sensor (BTS) for optimal charging performance 11 different LCD Readouts provide user adjustable settings and also system information (amps, voltage, temperature, etc). The MODE and UP and DOWN buttons on the charge controller allow the user to toggle through the LCD Readouts and adjust the settings. See below.

12 AWG Solar Panel Extension Cable Wire 25 ft to 300 ft RV Boat

Normal 0 false false false EN-US X-NONE X-NONE 12 AWG Solar CableMade in the USA Sold in lengths ranging from 5 to 300 feet. Simply select the length you want from the tab at the top of this web page. Technical Specifications:Wire Thickness: 12 AWG Stranding: 19Insulation Thickness: 0.045 inchesNominal Outer Diameter: 0.188 inches Approximate Net Weight : 30 lbs/1M’Copper Weight : 20.20 lbs/1M’Ampacity 90ºC Wet/Dry: 30Conductors: Fully annealed stranded bare copper per ASTM B3. Class B Stranding Insulation Jacket: Chemically crosslinked polyethylene Industry Standards and Approvals:Listed as XLP USE-2 or RHH/RHW-2 RoHS Compliant Wet/Dry Temperature: -40C to 90CSunlight resistantDirect burial Solar panel cable is typically sold in 16, 14, 12 and 10 AWG sizes. The solar panel cable offered in this listing is 12 AWG which is the second largest diameter of the four. Using large diameter cable minimizes power loss in your solar panel system. WindyNation also sells 10 AWG solar cable on ebay (Look for it in our store).

2 Gauge AWG Battery Cable Wire Lugs- Solar Marine Power Inverter Car Pure Copper

Custom 2 Gauge Battery and Inverter Cableswith WindyNation Power-Flex 100% Pure Copper Cable 100% made in the USA pure copper battery cable. Our battery cables are assembled in Ventura, CA using automated 10 ton pneumatic crimpers producing an excellent quality crimp. WindyNation’s battery cables are manufactured using our Power-Flex Welding cable, which is a highly flexible industrial grade electrical copper cable. WindyNation’s battery cables are excellent for battery bank wiring, inverter cables, grounding cables, RV & car wiring applications, golf cart wiring, and any other application where a highly flexible pure copper conductor is required. Our battery cables are available with pre-attached cable lugs with 5/16″ or 3/8″ diameter mounting holes. Polyolefin heat shrink tubing is applied at the cable lug attachment point to form a protective seal. Simply choose your desired cable color(s), cable length, and cable lug stud size from the drop-down tabs. See below for Windy Nation’s 2 AWG Power-Flex Welding Cable specifications and Cable Lug specifications Power-Flex CableTechnical Specifications Conductor Material: Fully annealed bare stranded copper wireInsulation Material: EPDM (with polymer tape separator)Maximum Voltage: 600 VDCMaximum Amperage (2 gauge): 205 ampsOperating Temperature: -50°C to 105°CStandards: SAE J1127 Certified Battery Cable Cable Lug Technical SpecificationsClosed end design to keep environmental conditions (e.g. outdoor environment) away from the cable connectionCopper cable lugs are tinned for corrosion protection. Excellent for any outdoor installation and marine environment. Pure copper cable lug has excellent conductivity characteristics

8 Gauge 8 AWG Red & or Black Welding Battery Cable + Cable Lugs + Heat Shrink

8 Gauge WindyNation Power-Flex Battery & Welding Cable + Cable Lugs + Heat Shrink Tubing Combo Listing with 100% Pure Copper Cable Purchase your cable, heat shrink tubing and cable lugs all in one listing and save money! Every purchase includes 6 feet of appropriately sized heat shrink tubing, which is enough to heat shrink 30pcs of cable lugs Simply choose your desired length and color of 8 gauge cable, cable lug quantity and stud size, and heat shrink tubing using the drop-down tabs above. 8 Gauge Power-Flex Welding and Battery Cable Description:WindyNation’s Power-Flex Cable is a highly flexible industrial grade electrical cable. Power-Flex Cable is excellent for welding applications, battery cable applications, battery bank wiring (wind and solar), RV & car wiring applications, and any other application where a highly flexible pure copper conductor is required. See Technical Specifications Chart below.WindyNation’s PowerFlex cable is 100% PURE copper cable. It is NOT cheap copper clad aluminum (CCA) cable. Power-Flex 8 Gauge Cable Technical Specifications Conductor Material: Fully annealed bare stranded copper wireInsulation Material: EPDM (with polymer tape separator)Maximum Voltage: 600 VDCOperating Temperature: -50°C to 105°CStandards: IEC60245, RoHS 8 Gauge Part #’s are CBL-CSBL-08 (black) and CBL-CSRD-08 (red) 8 Gauge Cable Lug Technical SpecificationsClosed end design to keep environmental conditions (e.g. outdoor environment) away from the cable connectionCopper cable lugs are tinned for corrosion protection. Excellent for any outdoor installation and marine environment. Pure copper cable lug has excellent conductivity characteristics Heat Shrink Specifications Color: Solid black (no printing on tube)Size: Inner diameter = 3/8″ (fits 8 gauge cable) Material: Polyolefin thin wall cross-linked Shrink Ratio: 2:1Chemical and Heat Resistance: Treated with flame retardant compounds and resistant to most chemical solventsTemperature Rating: 125 CentigradeVoltage Rating: 600 VoltsHeat Shrink Industry ApprovalsCSA approved for up to 125 Centigrade and 600 VoltsRoHS Compliant

AGM Deep Cycle Battery Bank 12V 24V 48V Off Grid Solar Wind 100AH to 1000AH

WindyNation BattaMax 100 Amp-Hour AGM Deep Cycle Battery BankMaintenance Free AGM Sealed Lead Acid BatteriesSimply use the drop-down tab above to select (1) battery bank voltage (12, 24, or 48 volts) and (2) Amp-Hour CapacityThe BattaMax Owners Manual with detailed technical information can be downloaded or viewed on windynation’s website. What is included? The number of 100 Amp-Hour BattaMax batteries included with your purchase depends on what you select from the drop-down tab. For example, if you select “12 Volts at 400 Amp-Hours” from the drop-down tab, you will receive the following: Four pieces of 100 Amp-Hour Batteries + Three pairs of 2/0 Gauge Pure Copper Battery Interconnects with Tinned Copper Cable Lugs. All battery bank selections in the drop-down tab include heavy duty 2/0 Gauge Pure Copper Battery Interconnects with Tinned Copper Cable Lugs. Each battery bank configuration includes the correct amount of 2/0 Gauge Battery Interconnects to properly wire up the battery bank. BattaMax AGM Battery Product HighlightsAGM Deep Cycle Battery with full 1 year warrantySealed non-spillable constructionManufactured using 99.995% pure lead yields an extremely low self-discharge rateAGM batteries provide superior performance and longevity compared to standard lead acid batteriesIdeally suited for all off-grid, back-up power, and power supply applicationsNote: BattaMax Batteries are manufactured using Absorbent Glass Mat (AGM) technology. WindyNation’s BattaMax batteries arrive pre-charged, however, it is recommended that the battery is charged to approximately 13.8 VDC before initial use as batteries will slowly self discharge over time. Typical ApplicationsRV Power, Off-grid wind and solar, Offshore marine power, Telecommunications, Alarm and security systems, UPS, Emergency lighting, Communication power supply, DC power supply, Portable tools, Electric vehicles, golf carts, etc.

Welding Cable Red Black 6 AWG GAUGE COPPER WIRE BATTERY SOLAR LEADS

WindyNation 6 AWG Power-Flex Welding Cable WindyNation’s Power-Flex Welding cable is a highly flexible industrial grade electrical cable. WindyNation’s welding cable is excellent for welding applications, battery cable applications, battery bank wiring (wind and solar), RV & car wiring applications, and any other application where a highly flexible pure copper conductor is required. Simply choose the desired jacket color and cable length from the selections above. Please Note: The “50% Black + 50% Red” option above means half the cable in your order will have black insulation the other half will have red insulation. For example, if you order 100 feet of the “50% Black + 50% Red” option, you will receive 50 feet of black insulation welding cable and 50 feet of red insulation welding cable. Technical Specifications Conductor Material: Fully annealed bare stranded copper wire Insulation Material: EPDM (with polymer tape separator) Maximum Voltage: 600 VDC Operating Temperature: -50°C to 105°C Standards: IEC60245, RoHS

10 AWG and 12 AWG Solar Panel Extension Cable Wire Connectors PV

10 AWG or 12 AWG Solar Extension Cable with Connectors Sold in various lengths and package quantities. Simply choose the desired cable size (10 or 12 AWG), cable length, and quantity from the selections above. Solar Cable terminated with a Male Connector and Female Connector10 AWG Solar Cable Technical Specifications:Wire Thickness: 10 AWGStranding: 19Insulation Thickness: 0.075 inchesNominal Outer Diameter: 0.28 inchesApproximate Net Weight : 17.54 ft/lbsAmpacity 90ºC Wet/Dry: 40AConductors: Fully annealed stranded bare copper per ASTM B3. Class B StrandingInsulation Jacket: Chemically crosslinked polyethylene12 AWG Solar Cable Technical Specifications::Wire Thickness: 12 AWG Stranding: 19Insulation Thickness: 0.045 inchesNominal Outer Diameter: 0.188 inches Approximate Net Weight : 30 lbs/1M’Copper Weight : 20.20 lbs/1M’Ampacity 90ºC Wet/Dry: 30AConductors: Fully annealed stranded bare copper per ASTM B3. Class B Stranding Insulation Jacket: Chemically crosslinked polyethylene Industry Standards and Approvals (10 AWG and 12 AWG Cable):UL Listed as XLP USE-2 or RHH/RHW-2 RoHS CompliantWet/Dry Temperature: -40C to 90CSunlight resistantDirect burial

4/0 AWG WELDING CABLE WIRE RED BLACK GAUGE COPPER WIRE BATTERY CAR SOLAR LEADS

WindyNation 4/0 AWG Power-Flex Welding Cable WindyNation’s Power-Flex Welding cable is a highly flexible industrial grade electrical cable. WindyNation’s welding cable is excellent for welding applications, battery cable applications, battery bank wiring (wind and solar), RV & car wiring applications, and any other application where a highly flexible pure copper conductor is required. Simply choose the desired jacket color and cable length from the selections above. Please Note: The “50% Black + 50% Red” option above means half the cable in your order will have black insulation the other half will have red insulation. For example, if you order 100 feet of the “50% Black + 50% Red” option, you will receive 50 feet of black insulation welding cable and 50 feet of red insulation welding cable. Technical Specifications Conductor Material: Fully annealed bare stranded copper wire Insulation Material: EPDM (with polymer tape separator) Maximum Voltage: 600 VDC Operating Temperature: -50°C to 105°C Standards: IEC60245, RoHS