WIREOPTIM Ni200 Nickel Wire 22 24 26 28 30 32 AWG 25′ 50′ 100′ 250′ 500′ 1000′
Every WIREOPTIM spool of wire is precision wound via hands-off computerized machines, perfectly tensioned, and handled with care in a clean environment to ensure only the highest quality product lands in your hands. Say goodbye to tangles, oil, skin salts, and other debris or contaminants. Nickel 200 is a ferromagnetic, commercially pure (99.6%) wrought Nickel. It has good mechanical proper properties over a wide range of temperatures, great resistance to corrosives (particularly hydroxides), and has high ductility. Annealed Ni200 Nickel has approximately the strength of mild steel. It is preferred for uses such as: Maintaining Purity in: Food Handling Operations Synthetic Fibers Alkalies Cold Forming Operations Deep Drawing Spinning Coining Corrosion Resistant Equipment Caustic Evaporators Spun Anodes Combustion Boats Laboratory Crucibles Specifications: Nickel 200 (Ni200) Annealed (soft) Shape: Round Nickel 200 (99.6% commercially pure). Rated for temperatures up to 1446°C (2635°F) Excellent Thermal and electrical properites
Stainless Steel 316L Wire 22 23 24 25 26 27 28 32 34 36 38 40 AWG 25′ – 1000′
Every WIREOPTIM spool of wire is precision wound via hands-off computerized machines, perfectly tensioned, and handled with care in a clean environment to ensure only the highest quality product lands in your hands. Say goodbye to tangles, oil, skin salts, and other debris or contaminants. Stainless Steel 316L wire has excellent general corrosion resistance, generally more resistant than 304. Stainless Steel 316L is an extremely-low carbon that minimizes harmful carbide precipitation from welding. Good oxidation resistance in intermittent service to 870 °C and in continuous service to 925 °C. Grade 316L is more resistant to carbide precipitation and can be used in the above temperature range. Typical applications include: Applications: Food Preparation Equipment (especially in chloride environments) Chemical processing, equipment Laboratory benches and equipment Rubber, plastics, pulp & paper machinery Pollution control equipment Boat fittings, value and pump trim Heat exchangers Pharmaceutical and textile industries Condensers, evaporators and tanks Medical implants, including pins, screws and orthopedic implants like total hip and knee replacements Specifications: Shape: Round Rated for temperatures 1371-1399°C (2500-2550°F). Heat Treatment: Annealed (soft) Tensile Strength (Mpa) ≥ 480 Dimensions, Ohms/ft, Largest Spool Denominations: 22 AWG – 0.64mm – 0.90 – 100′ 23 AWG – 0.57mm – 0.88 – 100′ 24 AWG – 0.51mm – 1.21 – 100′ 25 AWG – 0.45mm – 1.50 – 200′ 26 AWG – 0.40mm – 1.78 – 250′ 27 AWG – 0.36mm – 2.40 – 250′ 28 AWG – 0.32mm – 3.47 – 250′ 32 AWG – 0.20mm – 7.33 – 1000′ 34 AWG – 0.16mm – 11.68 – 1000′ 36 AWG – 0.127mm – 18.55 – 1000′ 38 AWG – 0.1007mm – 29.33 – 1000′ 40 AWG – 0.0799mm – 46.75 – 1000′
Nichrome 80 AWG 16 18 20 22 24 26 28 30 32 Gauge 25′ 50′ 100′ 250′ 500′ 1000′
Nichrome 80 Wire Every WIREOPTIM spool of wire is precision wound via hands-off computerized machines, perfectly tensioned, and handled with care in a clean environment to ensure only the highest quality product lands in your hands. Say goodbye to tangles, oil, skin salts, and other debris or contaminants. Nichrome 80 is an alloy consisting of 80% Nickel, and 20% Chromium. It is ideally suited as a resistance wire heating alloy. It has a high melting point and fantastic resistance to high temperature oxidation. This alloy offers superior service life compared to other Nichrome wire types due to the excellent adhesion properties of its surface oxide. Typical applications include:Industrial:Heating element for furnaces and many consumer appliances like cookers, toasters, kilns, water heaters, flat irons, soldering ironsFoam / polystyrene cuttingCeramic working to assist internal support structureManufacturing of motorcycle silencersThermocouple positive endDetecting presence of trace metals in flamesSpecifications:Shape: RoundMelting Point: 1400°COperating Temperature: 900°CCorrosivity: HIGHLY resistant to corrosionOxidation: HIGHLY resistant to oxidation at room temperature AWG, Diameter(mm), Ohms/ft, Largest Spool Denomination: 16 AWG – 1.29mm – 0.259 – 50′ 18 AWG – 1.02mm – 0.418 – 100′ 20 AWG – 0.81mm – 0.652 – 50′ 22 AWG – 0.64mm – 1.036 – 50′ 24 AWG – 0.51mm – 1.64 – 100′ 26 AWG – 0.40mm – 2.657 – 250′ 28 AWG – 0.32mm – 4.08 – 250′ 30 AWG – 0.254mm – 6.76 – 500′ 32 AWG – 0.20mm – 10.58 – 1000′ 36 AWG – 0.127mm – 26 – 1000′ 38 AWG – 0.1007mm – 40.62 – 1000′ 40 AWG – 0.0799 mm – 67.63 – 1000′ 0.8×0.1mm – 4.15 – 100′ 0.5×0.1mm – 6.57 – 100′ 0.4×0.1mm – 8.45 – 100′
Kanthal A1 16 18 20 21 22 23 24 25 26 27 28 29 30 31 32 34 36 38 40 AWG 25-1000′
Every WIREOPTIM spool of wire is precision wound via hands-off computerized machines, perfectly tensioned, and handled with care in a clean environment to ensure only the highest quality product lands in your hands. Say goodbye to tangles, oil, skin salts, and other debris or contaminants. Kanthal A-1 is a ferritic iron-chromium-aluminum alloy. Kanthal A-1 in particular has high resistivity and excellent oxidation resistance. It is typically used in such applications as: Heating Elements Furnace Applications Electrical Heating Elements High Temperature Furnaces Heating Treatment Glass Steel Ceramics Electronics Specifications: Kanthal A-1 (22% Cr, 5.8% Al, Fe balance) Rated for temperatures up to 1400°C (2550°F) Excellent Oxidation Resistance Melting Temperature: 1500°C (2732°F) Tensile Strength: 680 n/mm² Magnetic properties: Magnetic up to approximately 600°C (Curie point). Emissivity – fully oxidized material – 0.70 AWG, Diameter (mm), Ohms/ft, Largest Spool Denomination: 16 AWG – 1.29mm – 0.33 – 250′ 18 AWG – 1.02mm – 0.67 – 250′ 20 AWG – 0.81mm – 0.81 – 50′ 22 AWG – 0.64mm – 1.31 – 100′ 24 AWG – 0.51mm – 2.04 – 100′ 26 AWG – 0.40mm – 3.21 – 250′ 28 AWG – 0.32mm – 5.27 – 250′ 30 AWG – 0.25mm – 8.36 – 500′ 32 AWG – 0.20mm – 13.75 – 1000′ 34 AWG – 0.16mm – 21.1 – 1000′ 36 AWG – 0.127mm – 33.4 – 1000′ 38 AWG – 0.1007mm – 52.92 – 1000′ 40 AWG – 0.0799mm – 84 – 1000′