EPEVER MPPT Solar Charge Controller 40A 12/24/36/48V 520W/1040W XTRA4415N-XDS2
EPEVER MPPT Solar Charge Controller 40Amp ,12V/24V/36V/48V DC auto work , Solar Panels Max PV 150V , Max input Power 520W / 1040W / 1560W / 2080W. Common negative grounding. Applicable battery types : Lead-acid (Sealed / Gel(AGM) / Flooded),Lithium-ion (LiFePO4, Li[NiCoMn]O2) and User-defined Technical Data: Model: XTRA4415N-XDS2(Upgraded version)Rated charge and discharge current :40 AmpNominal system voltage:12V/24V/36V/48V DC auto work (When selecting lithium battery type, you should choose BAT type by manual ,as the Li-ion bat voltage can’t be identied automatically)Max. PV input power: 520W charge for 12V battery or 1040W @ 24V or 1560W @ 36V or 2080W @ 48V . Max. PV open circuit voltage:150V(at minimum operating environment temperature) , 138V(at 25℃ environment temperature)Support Battery types : Sealed(default) ,Gel (AGM), Flooded, User ; LiFePO4 (4s/12V; 8s/24V;15s-16s/48V ); Li (NiCoMn)O2 (3s/12V; 6s-7s/24V ;13s-14s/48V) ; User Defined (9~68V)Battery voltage range : 8～68VMPP voltage range:V(BAT+2V)～108VGrounding : Common negative groundingRS485 interface: 5VDC/200mA (RJ45)Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%Working environment temperature : -25℃～+50℃Storage temp. range: -20°C — +70°C/-4°F — 158°FLCD backlight time : 60S (Default)Controller Terminals:#6AWG(16mm2) ; Recommended Wire cable:#6AWG(16mm2)Mounting hole size:Φ5mmDimension:255*189*83.2mm ; weight :2.47 KG EPEVER XTRA-N series mppt solar charge controller is new upgraded version than Tacer-AN series , Better functions and advanced design . Added Features : Adanced Display unit (XDS2) : Three LED Indicators + Bigger LCD display: PV/Battery/Load parametersAdd five buttons for parameters setting & monitoring Support Lead-Acid & Lithium-ion types batteries too , Upgraded new firmware and more safety protection functions. Package List: 1 X MPPT Solar Charge Controller 40A (XTRA4415N-XDS2)1 X Temperature sensor unit for controller（Model:RT-MF58R47K3.81A）1 X Manual (English) Protection function : Note : Our US warehouse in Chicago, our professional local team engineer supply solar system solutions and services support for you in time . •PV Over Current/power protection • PV Short Circuit protection • PV Reverse Polarity protection • Night Reverse Charging protection • Controller Overheating protection • Battery Reverse Polarity protection • Battery Over Voltage protection • Battery Over Discharge protection • Battery Overheating protection • Lithium Battery Low Temperature protection • Load Short Circuit protection • Load Overload protection •Controller overheating protection •TVS High Voltage Transients protection XTRA4415N controller could set battery types: Sealed; Gel(AGM); Flooded ; LiFePO4 (4s/12V; 8s/24V;15s-16s/48V ); Li (NiCoMn)O2 (3s/12V; 6s-7s/24V ;13s-14s/48V) . More details parameters setting ( User type: 9~68V) by EPEVER accessories : MT50 , WiFi adapter, BLE adapter, eLOG01, PC software;We have made Amazon listing videos about how to use the controller and how to set parameters , please watch video tutorials , More questions please feel free to ask vendor { Goland Century } first . Step: Connect solar system in the order of 1.battery–> 2. load–> 3.PV array ; and disconnect solar system in the reverse order 3. 2. 1. Battery must be connected with controller first ! Never connect soalr panel array to controller Without/Before connect battery.DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.)
30A MPPT Solar Charge Controller 12V 24V 390W 780W EPEVER XTRA3210N LCD USB
EPEVER MPPT Solar Charge Controller 30A 12V/24V , 400W/800W XTRA3210N-XDS2
EPEVER MPPT Solar Charge Controller XTRA series 30Amp 12V/24V DC auto work ,Max PV 100V , Solar Panels Max input 390W / 780W , Common negative grounding. Applicable battery types : Lead-acid (Sealed / Gel(AGM) / Flooded), User ; User-defined for Lithium(LiFePO4, Li[NiCoMn]O2) .Technical Data:Model: XTRA3210N-XDS2Rated charge and discharge current :30 AmpMPPT Tracking efficiency : ≥99.5% , Max. conversion efficiency :98%Nominal system voltage:12V/24V DC auto work (When selecting lithium battery , you should choose right system voltage for Lithium type)Max. PV input power: 390W for 12V battery system / 780W for 24V battery systemMax. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)Support Battery types : Lead-acid : Sealed(default) ,Gel (AGM), Flooded, User ; User Defined (9~34V) for Lithium : LiFePO4, Li[NiCoMn]O2 .Battery voltage range : 8～32VMPP voltage range:V(BAT+2V)～72VGrounding : Common negative groundingRS485 interface: 5VDC/200mA (RJ45)Working environment temperature : -25℃～+50℃Storage temp. range: -20°C — +70°C/-4°F — 158°FLCD backlight time : 60S (Default)Controller Terminals:#6 AWG(16mm2) ; Recommended Wire cable:#8 AWG(10mm2)Mounting hole size:Φ5mmDimension:230*165*63mm ;weight :1.31 KGNewest EPEVER MPPT solar charge controller XTRA series is new upgraded version than Tacer-AN series , added Features :Adanced Display unit (XDS2) : Three LED Indicators + Bigger LCD display: PV/Battery/Load parametersAdd five buttons for parameters setting & monitoring , More Safety Protection Functions.Package List:1 X MPPT Solar Charge Controller 30A ( XTRA3210N-XDS2)1 X Temperature sensor unit for controller（Model:RT-MF58R47K3.81A）1 X Manual (English)Electronic Protections :Note : Our warehouse located in Chicago, IL, US , we professional team and engineer supply solar system solutions and support services for you in time .•PV Over Current/power protection • PV Short Circuit protection • PV Reverse Polarity protection• Night Reverse Charging protection • Controller Overheating protection• Battery Reverse Polarity protection • Battery Over Voltage protection• Battery Over Discharge protection • Battery Overheating protection• Lithium Battery Low Temperature protection• Load Short Circuit protection • Load Overload protection•Controller overheating protection•TVS High Voltage Transients protectionApplicable battery types : Lead-acid (Sealed / Gel(AGM) / Flooded), User ; User-defined for Lithium(LiFePO4, Li[NiCoMn]O2) .Battery types: Sealed (default)/ Gel/ Flooded ,LiFePO4 (4s/12V; 8s/24V), Li (NiCoMn)O2 (3s/12V; 6s/24V),(default parameters);User (9～34V) could be setting by controller buttons ; more parameters setting need EPEVER accessories : MT50 , WiFi adapter , BLE adapter, eLOG01, PC software ;We have prepared video tutorials about how to use the controller and how to set parameters . More questions please feel free to ask vendor first .Step: Connect solar system in the order of 1.battery–> 2. load–> 3.PV array ; and disconnect solar system in the reverse order 3. 2. 1.Battery must be connected with controller first ! Never connect soalr panel array to controller Without/Before connect battery.DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.)