MPPT 100AMP Solar Charge Controller For USB 12V 24V 36V 48V DC Battery Regulator
Specifications
| Brand | Unbranded |
| Color | Black |
| Current Output | 100 a or greater |
| Current Rating | 100 A |
| Display Title In Boldface | off |
| Material | Plastic+Metal |
| Power Source | Solar |
| Recommended Environment | outdoor |
| Resistance Properties | Dustproof |
| System Configuration | off-grid |
| Type | Charger/Inverter |
| Wattage | 1000-4000 W |
Feature: LCD LIQUID CRYSTAL DISPLAY: Large LCD display, support battery working status display, solar panel working status display, mode control display, load output status and each parameter display, normal and fault status display. 7 OPERATION MODES：Charging mode, light control mode, light control + time delay control mode, general control mode, manual control mode, timing control mode and test mode, the test mode is only for factory test use. 4 KINDS OF VOLTAGES AUTOMATIC IDENTIFICATION：It will automatic identify DC12V/24V, DC36V, DC48V by itself. LARGE-SECTION WIRING PORT: use large-section, large-spacing wiring ports, can be installed 16mm wire, the wire spacing of 7mm increases the insulation performance and the reliability of installation.