Ultra Custom Pools

Item Tag: 1 Gallon

1 Gallon Sherwin Williams Super Deck Exterior Solid Color Stain/ Medium Brown

1 Gallon Sherwin Williams Super Deck Exterior Solid Color Stain/ Medium Brown Provides durable, opaque protection for many exterior horizontal wood surfaces. It is recommended that you consult the manufacturer of your composite deck for staining procedures. Featuring Cool Feel™ Color Technology helps reduce the surface temperature by up to 20°F when compared to conventional color technology.

Crane Drop Ultrasonic Cool Mist Humidifier – Blue/White – 1gal

•VARIABLE SPEED SETTINGS: No matter the humidity level you would like to achieve we’ve got you covered. The Crane drop cool mist humidifiers offer variable output settings and an adjustable 360 degree mist lid making it easy to send the mist in any direction. The mist output is perfect for humidifying rooms up to 500 square feet, which is a standard medium to large sized room. •EASY TO CLEAN: Crane’s easy to clean humidifier design features a detachable bottom fill tank, which is recommended by health professionals for promoting clean humidifier habits. The water level sensor and cap also are removable, giving you access to clean the entire base. We recommend cleaning the humidifier based on frequency of use and provide many educational resources on how to clean your humidifier.

E28 Cool Life Deck Coating | Infrared Heat Reflective Technology in 12 Colors…

This 100% Heat Reflective Coating available in 12 colors is specially formulated to reflect infrared rays, and can reduce a colored deck’s surface temperature up to 25-30%! E28 Cool Life Deck Coating is also great for sealing concrete, masonry and wood to provide resistance against water, alkalis, acids, ultra-violet light and staining.

ProTech300 Outdoor Wood Boiler Water Treatment, 1 Gallon

The ProTech300. It’s been Improved! The ProTech300 is a new and improved formula with chemical detection technology.  We have taken it to the next level. It has the highest level of protection for the wood boiler than other brand-name boiler treatment. It has 3 levels of protection.  That means 3 Active ingredients in it. The 3 Protection “Levels” are: 1. Nitrite 2. Phosphonate 3. Anodic inhibitor. ProTech 300 provides protection for your wood boiler from rust, corrosion, and scale.  ProTech 300 Boiler Water Treatment has been designed to be used in Manufacturer’s Boiler Treatment Programs.  Adding 1 Gallon of ProTech300 to 300 gallons of boiler fill water will yield +/- 1000 ppm nitrite.  Suggested nitrite levels are 750 ppm = Adequate, 1000 ppm = Good, 1500 ppm = Great.  Dose the system accordingly to the required control levels set by your boiler manufacturer and your system’s nitrite needs based on test results. You can determine the needs of your system by testing your boiler water using our do-it-yourself test kit. See our 300Test kit.  The manufacturers can’t tell the difference if you are using their expensive brand or our ProTech300, so send it into their labs with confidence.  ProTech 300 Protects Cast Iron, Mild Steel, Titanium and Stainless Steel Our ProTech 300 Boiler Treatment will: Protect your wood boiler from rust, corrosion, and scale Balance pH and Alkalinity Exceeds all boiler treatments on the market with three levels of protection Reduces sludge & mineral deposits Best Oxygen Control in the business Dye Indicator for easy visual inspection Shaver Wood Furnace and many other companies recommend this product Only!

Professional concrete floor finish high gloss 1 Gal quick drying acrylic (520)

Normal 0 false false false EN-US JA X-NONE UBQ Industries – Active Elements™ Advance Protect and Shine Acrylic Floor Finish Active Elements™ – Protect & Shine is a high gloss long lasting and renewable maintenance coat for interior decorative concrete floors. Protect & Shine is a rapid return to service product making it ideal for retail and commercial floors where maintenance must be performed during after hours. It is also perfect for residential floors especially when there are pets present or the floors get heavy use. Active Elements™ – Protect & Shine should be applied over the top of a base sealer such as Active Elements™ – Advance Seal. Coverage 500 – 1000 square feet per gallon Coverage variations depend on concrete surface porosity and amount of material applied. Drying Time Dry to Touch. 5-15 minutes Recoat 30 minutes Light traffic 1 hour Full Cure 5 hours Surface PreparationPrior to the application of Active Elements – Protect & Shine, the floor must be clean and dry. A previously applied base sealer must be fully cured. Application Tools Finish mop or floor finish applicator. Application Completely dampen the finish applicator with Active Elements – Protect & Shine and apply a very thin coat. As Active Elements – Protect & Shine is being applied it should make the floor look wet but not milky. If you are seeing a milky haze, reduce the amount of material being applied per square foot. Each successive coat should be applied perpendicular to the previous coat in order to reduce lap marks. ***For interior use only.*** Initial application on a floor — apply 4-8 thin coats. As a maintenance application — apply 1-2 thin coats. Thinning Do not thin. Clean Up Tools can be cleaned with soap and water. Storage and Shelf Life Do not allow to freeze. Shelf life of unopened product is approximately one year. Slip and Fall Precautions Water or other foreign substances will cause a floor coated with Floor Finish to become slippery. ALWAYS use a “Wet Floor” sign when moisture is present. Safety Do not breathe vapors. When using in confined or limited ventilation areas, use appropriate respirator to protect against breathing vapors. Avoid contact with skin; wear protective gloves and clothing. Always use eye protection such as goggles, face shield or safety glasses. Read Material Safety Data Sheet before using. First Aid Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes while holding eyelids open. Seek medical attention. Skin Contact: Immediately remove contaminated clothing. Wipe excess from skin and wash with soap and water. Seek medical attention if irritation persists. Inhalation: Remove person to fresh air and provide oxygen if breathing is difficult. Seek medical attention. Moisture Vapor Emissions / Alkalinity Precautions All interior concrete floors not poured over an effective moisture vapor barrier/inhibitor are subject to possible moisture vapor transmission and related high levels of alkalinity that may lead to blistering and failure of the coating system. It is the coating applicator’s responsibility to conduct calcium chloride and relative humidity probe testing to determine if excessive levels of vapor emissions or alkalinity are present before applying any coatings. Warranty This warranty is made in lieu of all other warranties, either expressed or implied. Before application the User shall determine the suitability of the product for his/her intended use and User assumes all risks and liabilities whatsoever in connection therewith. Neither seller nor manufacturer has any knowledge or control concerning the purchaser’s use of this product and no warranty is made as to the results of any use. The Manufacturer and/or Seller warrants that if any goods supplied prove defective in material the sole obligation shall be to replace said product. Any claim of defective product must be received in writing within one (1) year from date of shipment. Neither Manufacturer nor Seller shall assume any liability for injury, loss, or damage resulting from use of this product. DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN.