1′ – 500′ coil – BLUE Certified Non-Barrier PEX B Tubing Htg/Plbg/Potable Water
This listing is for one roll of 500′ of 1″ NSF Certified Non Oxygen Barrier PEX B Tubing For Heating, Plumbing and Direct burial. NSF Certified PEX tubing is made to the following specifications. *Made to ASTM specifications. *Rated at 100 psi at 180 degrees. *Rated at 80 psi at 200 degrees. *Rated at 160 psi at 73 degrees. * OD 1.125 ID .865 * Wall Thickness .130 * Weight per foot .16 * ASTM 876/877 * NSF Certified for Potable Water * Not to be installed in Direct Sunlight Made using the silane method (water bath). PEX Size Inside Diameter Outside Diameter Volume Gal/100 ft 3/8” .360 .500 .50 1/2” .485 .625 .92 3/4″ .681 .875 1.83 1” .875 1.125 3.03 NSF Certified Pex tubing is connected in 2 different ways. Crimp fittings are the most effective way of connecting. This is done with a barbed fitting and a copper crimp ring. The ring is compressed with the use of a crimp ring tool. This method is the cheapest and best way to a connection and is the least susceptible to leaks down the road. You can also use push-fit fittings. They are great for a quick repair, or a small installation project. They are however more expensive and more susceptible to leaks down the road. Do Not use pex tubing for any of the following applications. Anywhere the temperature could reach 230 F or more.Not for use with steam.Keep out of direct sunlight.Keep away from areas that are exposed to a flame or heat source.Not to be used with liquids -40 F or below ***We will ship to Alaska/e call for shipping quote***
1″ Female Sweat Pex-al-Pex Compression Fitting–Bag of 2
Pex-AL-Pex 1″ FS (Female Sweat) Compression Fitting, Bag of 2 We have over 300 pieces of this item in stock, and will always ship your order within 24 business hours after the order is placed. NOT for Pex B Tubing, Use with 1” Pex-AL-Pex tubing only Brass Construction Simple and Reliable: Radiant heat Pexalpex fitting system is as simple as it looks. All you need is a wrench to tighten the nut. Double O rings and a brass Compression ring insure a leak proof connection. Made out of solid brass these fittings are for long, trouble free service. Product Overview: Compression fittings are designed to only be used with Pexalpex tubing NOT Pex tubing, for radiant heat and snow melting application. The fittings are compatible with either water, or water/glycol solutions, fittings are available in a variety Compression x Sweat, or Compression x NPT connections. Warnings: When using sweat fittings, ensure that all O-rings and insulating inserts are removed prior to soldering. If connections must be made in Temperatures lower than 30 degrees, caution must be taken to for a proper seal.
5KW Plastic, titanium tube and shell for heating and refrigeration
Titanium Heat Exchanger for Spa Pool Heat Pump / Aquarium Chiller 17,000 BTU The internal heat exchanger is made of pure titanium, offering excellent corrosion resistance and high heat exchange efficiency. It is non-magnetic, non-toxic, and can withstand high temperatures. The outer barrel is made of injection-molded high-strength plastics, forming a secure seal. Corrosion resistant heat exchangers for swimming pool heaters, aquariums, aquaculture, waste heat recovery, water source geothermal heat exchange, and other non-potable water heating or heat transfer use with PVC compatible working fluids. Water Temp Range 32-113F Water Max Pressure 72 PSI Refrigerant Temp Range 58-248F Refrigerant Max Pressure 740 PSI All models use 6mm thick PVC shell with TA1 pure titanium seamless tube. · Compatible with all CFC, HCFC, and HFC refrigerants. · Designed for use with highly chlorinated water and salt water Its unique coil design features titanium and plastic with the added benefit of a fluted titanium construction that yields a 150% increase in efficiency over non titanium coils as well as providing erosion and corrosion once unheard of in the heat exchanger industry. Rather than stainless steel or other materials, only titanium can stand up to the corrosive effects of salts and chlorine in swimming pool water. By installing a Sppvx pool heater you modify the air conditioning systems condenser to a combination of air cooling and more effective water cooling for greater efficiency. When the pool calls for heat and the air conditioner is in operation, waste heat is transferred to the pool water via the water condenser and not dissipated into the air. By recycling waste heat you lower refrigerant temperatures, improve the a/c unit’s efficiency, which in turn lessens the unit’s workload, extending the life of your air conditioning system.