1 PCS White Pella Storm Door 2 Point Bolt Mortise Lock Mechanism

Storm Door 2 Point Bolt Mortise Lock Body,Fit Pella Storm Door Handleset Part,White Face Plate. You need to open a 5-9/6″‘tall and 11/16″‘ wide mortise and tenon hole on the side of the door. If you need the lock body to be fully embedded in the door, at least 1-9/16 “.

Ashland Multipoint Lock XP25 3 point Shootbolt 60mm Backset 20mm Faceplate

This is the center section of the Sentinel Swing Multipoint XP25 3 point lock by Ashland. With the Shootbolt Extensions applied, this lock is adjustable and will fit on a variety of door sizes. This part of the multipoint lock is the gearbox with deadbolt and spring latch, it is 1 of 3 pieces.

elox Storefront Narrow Stile Mortise Door Lock Hookbolt, Sliding Bolt & Zinc All

US Aluminium Sliding Narrow Door Hook Lock, Designed for aluninum or steel entrance doors, Backset: 31/32″. Accepts 1-5/32″ mortise cylinder or thumbturn from either or both sides, Lock case: 1″ x 5-13/16″ x depth (case depth varies with brackset) Hook Bolt made of 5 ply laminated steel bolt with concealed hardened steel pin provides maximum security for any single leaf door or a typical installation where gap between door and jamb is greater than it should be.