Hoppe Mortise Lock Single Point Mortise Lock 1″ Deadbolt Throw 1-3/8″ Backset
We are an Authorized Distributor for Andersen, Larson, Marvin, Pella, GU Ferco, Hoppe, Emtek, Roto, Milgard, Peachtree, Weathershield, and many more. This is a single point lock and it is not interchangeable with the lock body on a HOPPE multipoint lock, nor can it be used to repair or provide parts for a multipoint lock.
Single Point Compression Latch for Underbody Truck Tool Box ， Gasket and Cyli…
Single Point Compression Latch for Underbody Truck Tool Box. Our Single Point Compression Latch combines strength, versatility, and style, making it the ideal choice for your underbody truck tool box.
Amesbury Truth P2000 Active Single Point Mortise Lock 45/92 European Cylinder
We are an Authorized Distributor for Andersen, Larson, Marvin, Pella, GU Ferco, Hoppe, Emtek, Roto, Milgard, Peachtree, Weathershield, and many more. Shop our store for your door and window hardware needs. Customer Service Hours Monday-Friday 8am-4pm CST Premier P2000 gear box for multipoint-locks with 1-3/4″ (45mm) backsetUsed on active doors with 5/8″ (16mm) or 25/32″ (20mm) faceplatesNO FACEPLATE, this is the gearbox only, used to repair or replace broken gearsBackset: 1-3/4″ (45mm)Handle to Cylinder spacing: 3-5/8″ (92mm)Cylinder Type: Euro / Profile VersionLockcase bodies are available in 3 backsets1-3/8 inch (35mm)1-3/4 inch (45mm)2-3/8 inch (60mm)
HOPPE Mortise Lock Single Point 1-3/4″ Backset With Satin Nickel Cylinder
HOPPE Mortise Lock, 1″ Deadbolt Throw, 45/92 Single Point Lock 1-3/4″ Backset With Satin Nickel Profile Cylinder IMPORTANT NOTICE: This HOPPE Single Point Mortise Lock can NOT be used to repair a multipoint lockThere are no interchangeable parts from this lock that can be used on other locks.Hoppe manual single point mortise lock (SPL)Used by Caradco, Norco, Weather Shield, Bilt Best, Shelter and many others, also replaces FUHR Single point locks.Backset: 1-3/4″ (45mm),
HOPPE Mortise Lock, 1″ Deadbolt Throw, 45/92 Single Point Lock 1-3/4″ Backset
IMPORTANT NOTICE: This HOPPE Single Point Mortise Lock can NOT be used to repair a multipoint lockThere are no interchangeable parts from this lock that can be used on other locks.Hoppe manual single point mortise lock (SPL)Used by Caradco, Norco, Weather Shield, Bilt Best, Shelter and many others, also replaces FUHR Single point locks.Backset: 1-3/4″ (45mm),
Peachtree Mortise Lock IPD French Mortise Lock Right Hand Single Point Door Lock
All links are at the bottom of this page. This IPD Lock is the hardest multipoint lock to install. Diagram:How to reverse the latch on a Peachtree IPD mortise lock. See Video:Reversing the Panic Release function on an IPD Mortise Lock.
Hoppe Mortise Single Point Lock Rotation Limiter 1 Inch Deadbolt Throw 60/92
We are an Authorized Distributor for Andersen, Larson, Marvin, Pella, GU Ferco, Hoppe, Emtek, Roto, Milgard, Peachtree, Weathershield, and many more. Shop our store for your door and window hardware needs. IMPORTANT NOTICE: This single point mortise lock CANNOT used to repair a multipoint lock There are no interchangeable parts from this lock that can be used on other locks. Hoppe manual single point mortise lock (SPL) Used by Caradco, Norco, WeatherShield, Bilt Best, Shelter and many others, also replaces FUHR Single point locks. 16mm Hoppe 45/92 Single Point Lock (SPL) 1″ Deadbolt, new style with locking handle Deadbolt Throw: 1 inch (25 mm). Face Plate Width: 5/8 (16 mm) Face Plate Length: 10-13/16 inch. Faceplate Screw Holes: 10-1/8 inch. Faceplate Material: Stainless Steel Backset: 1-3/4 inch (45 mm) – distance from edge of face plate to center of lock handle. All Current Model Single Point Locks from HOPPE w/ Rotation Limiter (Lever is fixed and does not move after door is locked) 11517475 – 35mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends 11517505 – 60mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends 11517517 – 70mm backset, 25.4mm deadbolt throw, 16mm faceplate with radius ends (Please contact office if needing one of the locks not currently linked to our site)Latch handing may be changed by pulling out or inserting small screwdriver into small hole in back of latch and pushing forward, twist latch and release. See linked article below. HOPPE Screws for Installation: 8785695 – Screw 1-3/8″ ( 35mm ) 8mm Head – Stainless Steel 8785687 – Screws, 3/4″ (20mm ) 8mm Head – Stainless Steel Helpful Articles How To Drill Out A HOPPE Mortise Lock If The Dead Bolt Doesn’t Retract How to Change the Handing (Reverse the Slope of the Latch) on a HOPPE Lock
Mortsie Lock Single Point Active 60mm Backset Marvin, Caradco, Jeldwen doors
We are an Authorized Distributor for Andersen, Larson, Marvin, Pella, GU Ferco, Hoppe, Emtek, Roto, Milgard, Peachtree, Weathershield, and many more. Shop our store for your door and window hardware needs. Customer Service Hours Monday-Friday 8am-4pm CST Single point active lock (SPL) for Marvin Ultimate and other inswing doorsmanufactured 1/17/2000 to present.For mortise lock faceplate, see part # 395040Lock Body Type: American cylinderHandle spacing: 3-5/8 inch (92 mm) Center of handle to center of cylinderBackset: 2-3/8 inch (60 mm) Measured from door edge to center of handleBackset without Face plate (measures 2-5/16 as shown in 2nd image)Deadbolt throw: 1 inch (25.4 mm) TaperedPatent NO. 6,209,931Single point locks used by Marvin, Caradco, Jeldwen and othersPriced and sold each.NOTE: Does Not include faceplate or Strike, lock body onlyScrew between Latch and Deadbolt is a # 6 Flat head, not includedChange Handing:1. Insert screw driver into slot behind latch2. Pull down on handing release, latch pops out3. Rotate latch and push back into lock caseALWAYS Check Function of lock before closing doorOperation:1. Lift handle to engage2. Turn Thumbturn or key to extend the deadbolt
Hoppe Mortise Single Point Lock 16mm Faceplate 14mm DeadBolt Throw 35/92 Gear
HOPPE 1-3/8 inch Backset, Single Point Lock (SPL) IMPORTANT NOTICE: This Single Point Mortise Lock can NOT be used to repair a multipoint lock. There are no interchangeable parts from this lock that can be used on other locks. PZ (Distance from center of handle to center of cylinder): 3-5/8 in. (92mm) Backset: 1-3/8 inch (35 mm) Deadbolt extends: 1/2 in. (14mm) Faceplate Width: 5/8 in. (16mm)
Hoppe Mortise Single Point Lock 16mm Faceplate 14mm Deadbolt Throw 45/92 Gear
IMPORTANT NOTICE: This HOPPE Single Point Mortise Lock can NOT be used to repair a multipoint lock There are no interchangeable parts from this lock that can be used on other locks. Hoppe manual single point mortise lock (SPL) Used by Caradco, Norco, WeatherShield, Bilt Best, Shelter and many others, also replaces FUHR Single point locks. Backset: 1-3/4″ (45mm), Deadbolt Throw:.55″ (14mm), Number of Screws: 2 Click here if the dead bolt will not retract Priced and sold each.