Ultra Custom Pools

Item Tag: Solar Charge Controller

10/20/30/40/60A PWM Solar Panel Battery Regulator Charge Controller USB 12/24V

10A / 20A / 30A / 40A / 60A PWM Solar Panel Battery Regulator Charge Controller 12V or 24V Batteries with Dual USB Output – Blue CaseThis PWM Solar Battery Charge Controller automatically manages and regulates the voltage and current to the battery from the solar panel(s). It incorporates short-circuit, open-circuit, reverse polarity, and overload protection in order to ensure that the batteries are not overcharged and that power isn’t discharged from the batteries to the solar panels during shaded or dark conditions and drain the batteries. It comes with USB ports to charge your phone and other electronic devices directly from the controller.This solar charge controller is perfect for smaller home, cabin, RV and other remote and portable solar systems.FeaturesThis controller is designed for use only with 12V and 24V lead-acid batteries. It cannot be used with lithium-ion, nickel-cadmium or other battery types.Regulates the voltage from the solar panels going to the batteries.Built-in industrial master chip to control the charge and discharge process with adjustable parameters to prolong the battery life cycle and stabilize power to the load.3-stage PWM charge management with short-circuit protection, open-circuit protection, and reverse polarity protection.Dual USB outputs with 5V/2A maximum power (across both outputs) can charge mobile phones, tablets, and other USB-powered devices.LCD display with backlight function displays status and parameters.Dual MOSFET reverse current protection, low power dissipation.Easy to install and operate, suitable for home, industrial, commercial, remote and portable solar energy systems.Models for !0A, 20A, 30A, 40A and 60A maximum input currentSpecificationsSize: Approx. 13.3 x 7 x 3.5 cm/ 5.24 x 2.76 x 1.38 inch (LxWxH) (10A, 20A and 30A models) Approx. 18.8 x 9 x 4.7 cm/ 7.4 x 3.54 x 1.85 inch (LxWxH) (40A & 60A models)Battery Voltage: 12V/ 24V (Auto recognition)Input Charging Current: 10A / 20A / 30A / 40A / 60A dependent upon the model chosen. The maximum panel output current should be about 25% less than the controller’s maximum input current rating. For example, with a single 6A 100W panel, use the 10A model. Two 6A panels (12A total) should use the 20A model. If in doubt, use the higher current model, i.e. if the maximum panel output current is 9A, use the 20A model rather than the 10A model. Maximum Discharge Current: 10A (10A, 20A and 30A models) 20A (40A model) 30A (60A model)Internal power consumption: =10mAOver Charge Protection:B01 Sealed: 14.4V/28.8VB02 Gel: 14.2V/28.4VB03 Flood: 14.6V/29.2VOver Charge Float: 13.7V/27.4VCharge Recovery Voltage: 12.6V/25.2VOver-discharge Protection: 10.7V/21.4VOver-discharge Recovery: 12.6V/25.2VUSB output: 5V/2A12V batteries should be used with solar panels capable of generating 18V-25V With 12V batteries, the maximum panel voltage must not exceed 25V24V batteries should be used with solar panels capable of generating 36V-50V With 24V batteries, the maximum panel voltage must not exceed 50VMaximum Power Input:10A Model 12V: 120W (MAX), 24V: 240W (MAX)20A Model 12V: 240W (MAX), 24V: 480W (MAX)30A Model 12V: 360W (MAX), 24V: 720W (MAX)40A Model 12V: 520W (MAX), 24V: 1040W (MAX) 60A Model 12V: 780W (MAX), 24V: 1560W (MAX)Operating Temperature: -35 ~ +60CStorage Temperature: -35 ~ +60CPackage Includes:1X (1 Piece) 10A, 20A, 30A, 40A or 60A PWM Solar Charge Controller (Amperage selected at checkout) – Blue Case (10A, 20A, 30A and 40A models) or White Case (60A model) Link to online Installation and Operating InstructionsNOTE: The solar panel and battery in the photo are shown to illustrate the controller’s interconnections only. They are not included with the charge controllerWe also carry these PWM solar charge controllers with a BLACK faceplate rather than BLUE: 10/20/30A PWM Solar Panel Battery Regulator Charge Controller USB 12V 24V Black Faceplate.Get it faster! Stocks and ships from our US Colorado office for quick delivery.Contact us for quantity/OEM discounts.We provide FREE USPS First Class Shipping with Tracking – Not Economy Shipping

60A Solar Panel Battery Charge Controller 12V/24V LCD Regulator Auto Dual USB US

Product Description Features Thlevel solar charge controller is a kind of intelligent, multi-purpose solar charge and discharge controller. Solar Charge Regulator can fully meet your home Photovoltaic system (including home lighting system) requirements. Connection steps: Connect the battery to the charge regulator. Connect the solar panels to the charge regulator. Connect the consumer to the charge regulator. NOTE: The reverse order applies when deinstalling. The wrong connection sequence will damage the controller. Specifications Load: Light Control System Voltage: 12V 24V Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery) Max input power: 390W(12V system); 780W(24V system) Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood) Float charge: 13.7V(defaul,adjustable)，12.0-15.0V Discharge stop voltage: 10.7V(defaul,adjustable)，9.0-11.5V Discharge reconnect voltage:12.5V(defaul,adjustable)，11.0-13.0V Rated current: 60A Self-consume:(2)Solar panels —> (3)DC load. Disconnect order is (1)DC load —>(2)Solar panels —> (3) Battery Q: What battery type is this controller supported? A: Pay attention to this regulator is only suitable for lead acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, ions, or other batteries. Q: Why the LCD screen become blank? A: When the battery voltage is too low, the controller will stop to output ( ≦ 8V, controller turns itself off, LCD is blank, ≦ 10.7V (default), 12V output ports are not available); after the solar panels charging, it will re-output when the battery will return to 12.6V(default). Q: Why does the controller display 14.4V? A: If the solar charge controller is set to 12V, when the battery voltage reaches 14.4V or 14.5V, the solar charge controller will stop charging and play a protective role. If it does not enter the floating state, please don’t worry, the solar charge controller has a voltage limit value, will be not charge if the battery voltage reaches to 14.4V or 14.5V. Q:How is it set to charge battery during the day and turn on at dusk? A: Press the [DOWN]button to ON/OF load manully at main display （The load can’t be switched manually in the light control state.） There are 3 options for the working mode. Mode 1 : [24HR] >> Load output 24 hours Mode 2 : [1-23HR] >> Load on aftersunset and dosed after setting hours Mode 3 : [0H] >> Dusk to Dawn

Renogy 60A MPPT Solar Charge Controller 12V/24V/36V/48V For RV Refurbished

𝟑𝟏°𝐅 𝐭𝐨 𝟏𝟏𝟑°𝐅 𝐅𝐮𝐥𝐥 𝐋𝐨𝐚𝐝: Outlast Competitors in 𝐄𝐱𝐭𝐫𝐞𝐦𝐞 𝐂𝐥𝐢𝐦𝐚𝐭𝐞𝐬! Add Bluetooth 𝐁𝐓𝟐 (𝐦𝐨𝐝𝐮𝐥𝐞 𝐬𝐨𝐥𝐝 𝐬𝐞𝐩𝐚𝐫𝐚𝐭𝐞𝐥𝐲) for phone alerts and energy reports.

P30L LCD 30A Solar Panel Regulator Charge Controller 12V 24V 390W 780W

WindyNation P30L 30A Solar Charge Controller with LCD Digital Display Settings are user adjustable! Technical Specifications Physical Specifications Includes Battery Temperature Sensor (BTS) for optimal charging performance 11 different LCD Readouts provide user adjustable settings and also system information (amps, voltage, temperature, etc). The MODE and UP and DOWN buttons on the charge controller allow the user to toggle through the LCD Readouts and adjust the settings. See below.