Ultra Custom Pools

Item Tag: Solar Charge Controller

4000W MPPT 100AMP Solar Charge Controller For 12V 24V 36V 48V Battery Regulator

Features: -With a large LCD display, it displays battery operating status, solar panel operating status, mode control, load output status and all parameters, normal and error status. -There are 7 operation modes: charging mode, light control mode, light control+time delay control mode, general control mode, manual control mode, time control mode and test mode. The test mode is intended for factory test use only. -With 4 kinds of voltages, automatic identification, DC 12V, DC 24V, DC 36V, DC 48V are automatically identified. -Use large cross section wiring connectors with large pitch, which can fit 16mm wires. The 7mm wire spacing increases the insulation performance and installation reliability, effectively reducing current and voltage drop while reducing losses.

EPEVER MPPT Solar Charge Controller 10A 20A 30A 40A Solar Panel Regulator

(2022 Upgraded Version) EPEVER MPPT Solar Charge Controller 10 20 30 40 Amp ,12V/24V DC auto work ,Max PV 100V ,Solar Panels Max input charging for 12V battery or 24V battery , Common Negative Grounded . Suitable for Lead-acid (Sealed / Gel(AGM) / Flooded); Lithium(LiFePO4 (4s/12V; 8s/24V), Li (NiCoMn)O2 (3s/12V; 6s/24V)) and User-defined .Note : Warehouse in USA, our professional engineer local team supply solar system solutions and Tech-support services for you in time .Technical Data:(MPPT 40A Tracer4210AN as example ,please choose right model Tracer1206AN, Tracer2210AN, Tracer3210AN, Tracer4210AN as you need)Model: Tracer4210ANRated charge and discharge current :40 AmpNominal system voltage:12V/24V DC auto workMax. PV input power: 520W charge for 12V battery system / 1040W charge for 24V battery systemMax. PV open circuit voltage:100V(at minimum operating environment temperature) 92V(at 25℃ environment temperature)Battery type :Lead-acid: Sealed (default)/ Gel/ AGM/ Flooded / User (9～17V@12V; 18～34V@ 24V) , Lithium: LiFePO4 (4s/12V; 8s/24V), Li (NiCoMn)O2 (3s/12V; 6s/24V), User (9～34V) and User-defined. (AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type )Grounding : Common negativeTracking efficiency : ≥99.5% , Max. conversion efficiency :98%Working environment temperature : -25℃～+50℃(100% input and output)Temperature: -20°C — +70°C/-4°F — 158°FLCD backlight time : 60S (Default)RS485 interface:5VDC/100mAController Terminals:#6 AWG(16mm2) ; Recommended Wire cable:#6 AWG(16mm2)Dimension:252*180*63mm ; weight :1.65 KGPackage List:1 X 40A MPPT Solar Charge Controller (Tracer4210AN )1 X Temperature sensor for controller（Model:RT-MF58R47K3.81A）1 X Manual (English)2022 EPEVER Tracer-AN series mppt solar charge controller is new upgraded version , Better funcations and advanced technology .Added Features ：Blacklight LCD Display ; More Safety Protection Functions ;Compatible with lead-acid and lithium-ion batteries too ;2022 Upgraded version support adjusting Lithium types by controller buttons directly .Product Features:Based on common negative design and Advanced MPPT technology, with efficiency no less than 99.5%,Ultra-fast tracking speed and tracking efficiency ;With the adaptive three-stage charging mode based on digital control circuit, Tracer-AN series controllers can effectively prolong the life-cycle of battery and significantly improve the system performance. The load, utility or generator auto-control relays make it easy to compose the hybrid power system;All-around electronic protections, including overcharging, over discharging, PV reverse polarity protection, effectively ensure the safer and more reliable operation of the solar system for longer service time;The isolated RS485 interface with standard MODBUS communication protocol, easy for customer to monitor and set the parameters via mobile phone APP or PC software;This modular solar controller can be widely used for different applications, e.g.solar RV, Communication base stations, household systems, and field monitoring, etc.Protection function :•PV Over Current/power protection • PV Short Circuit protection • PV Reverse Polarity protection• Night Reverse Charging protection • Controller Overheating protection• Battery Reverse Polarity protection • Battery Over Voltage protection• Battery Over Discharge protection • Battery Overheating protection• Lithium Battery Low Temperature protection• Load Short Circuit protection • Load Overload protection•TVS High Voltage Transients protectionCONNECTION DIAGRAMBattery must be connected first ! Never connect soalr panel array to controller Without/Before connect battery.DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.)How to program for Lithium Battery parameters ？Via Remote Meter (Accessories needed: MT50)Via Phone APP [ Android or IOS], (Accessories needed：WIFI adapter or BLE adapter )Via PC Software (Accessories needed RS485 cable :CC-USB-RS485-150U ) , Software download : EPEVER official website or read in manual .

100A 5200W 250VDC MPPT Solar Charge Controller 12V/24V/36V/48V Battery Regulator

Features: 【99.9% MPPT Efficiency】Advanced MPPT technology maximizes solar harvest for faster charging and higher energy output. 【True 100A Output】Delivers stable 100A continuous charging with intelligent cooling and reliable performance. 【250V PV Input】Supports up to 250VDC solar input and 5200W PV power for flexible panel configurations. 【Wide Battery Compatibility】Auto 12V/24V/36V/48V. Compatible with LiFePO4, Lithium-Ion, AGM, Gel, Flooded, SLA, and User batteries. Lithium activation supported. 【APP Monitoring】Monitor charging status, battery data, and system performance via optional Bluetooth module and SolarMate APP. 【Full Protection】LCD display, 5 load modes, RS485 Modbus communication, and protection against reverse polarity, overload, short circuit, overcharge, and over-temperature.