1/4″ Electric Solenoid Valve Brass 12V DC 24V 110/120 Volts AC Water Air Gas
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| MPN | RSSM-3 |
| Port Size: | 1/4'' NPT |
| Temp Range | 15 – 250F |
| Valve Material | Brass |
| Valve Type | 2-Way, Normally Closed |
Untitled Document Normally Closed – opens when power is applied Choose Your Own Voltage Function Normally Closed Connection 1/4” Inch FNPT Temperature Range 15 – 250F Pressure Range 0 – 115 PSI Power Requirements 10 Watts *Suitable Media Water – Air - Fuel Specifications Body Material Brass Components Stainless Steel Seal Material Viton® Diaphragm Operation Type Direct Acting Valve Coil Connection Lead Wires Orifice Size 3 mm Cv Value 0.40 *Duty Cycle 100% but not indefinitely Weight 10 oz Height 2.62" Length 1.60" port to port Width 1.20" Connection – No Polarity, + and – can be interchanged. The valve timing is uncertain, however it is very fast acting. Less than one second. *The Orifice size is 3mm and Cv value is 0.4. This valve is not recommended for gravity fed systems because of the small orifice size Mounting position is preferably coil up but can be mounted in any position. *Consult a chemical compatibility expert for correct seal and valve body material choice. *Duty Cycle – Like most solenoid valves the coil will become hot to the touch when left on continuously. The temperature will stabilize without failure. Leaving the valve powered on for long periods of time will reduce the life of the coil. Whenever possible the valve should be installed in a well ventilated are to increase the life of the coil. The valve is not intended to be left energized as a fail-safe for power outages. In this case please contact us for other options. A pre-filter is always recommended to keep the diaphragm free from debris and the valve functioning properly. Listing and template services provided by inkFrog