MIDNITE SOLAR MNPV6-DISCO DISCONNECT/COMBINER FOR SOLAR, WIND TURBINE/GENERATOR
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 30 Days |
| Model | MNPV6-DISCO |
| MPN | MNPV6-DISCO |
| Brand | Midnite Solar |
MIDNITE SOLAR MNPV6-DISCO DISCONNECT/COMBINER FOR SOLAR, WIND TURBINE/GENERATOR Midnite Solar MNPV-DISCOMNPV Disconnecting Combiner Box MNPV6 DISCO COMBINERPlease Note: This is an enclosure only, circuit breakers must be purchased separately. The MNPV6 Disco combiner is rated for outdoor use. Designed for combining a max of 6 PV strings rated up to 150VDC, 120 amps total output. The MNPV6 Disco is very flexible. It is ETL listed for AC and DC this allows you to configure it for several different uses. It will work with 1-6 din rail mount, 150V DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect you can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick. FeaturesConvenient disconnect handleAll aluminum powder coated housing that won’t rustFlip up cover that can stay in the open position during installationPV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)Standard din rail to mount up to 6, 150V breakers120 Amp tin plated copper bus bar to combine breaker outputs - bus bar may be split in twoDead front cover snaps into place after wiring is complete for safety ApplicationsPV combiner up to six strings using MNEPV 150 VDC breakers with the MNPV6 DiscoAC Combiner for up to three strings for use with micro inverters using MNEAC 240 VAC BreakersDC load center using MNPV breakers Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSPaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. See our other itemsThank you for visiting our Ebay store!Midnite Solar MNPV-DISCO MNPV Disconnecting Combiner Box MNPV6 DISCO COMBINER Please Note: This is an enclosure only, circuit breakers must be purchased separately. The MNPV6 Disco combiner is rated for outdoor use. Designed for combining a max of 6 PV strings rated up to 150VDC, 120 amps total output. The MNPV6 Disco is very flexible. It is ETL listed for AC and DC this allows you to configure it for several different uses. It will work with 1-6 din rail mount, 150V DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect you can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick. Features ---Convenient disconnect handle ---All aluminum powder coated housing that won’t rust ---Flip up cover that can stay in the open position during installation ---PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14) ---PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14) ---Standard din rail to mount up to 6, 150V breakers ---120 Amp tin plated copper bus bar to combine breaker outputs - bus bar may be split in two ---Dead front cover snaps into place after wiring is complete for safety Applications ---PV combiner up to six strings using MNEPV 150 VDC breakers with the MNPV6 Disco ---AC Combiner for up to three strings for use with micro inverters using MNEAC 240 VAC Breakers ---DC load center using MNPV breakers MIDNITE SOLAR MNPV6-DISCO DISCONNECT/COMBINER FOR SOLAR, WIND TURBINE/GENERATOR Midnite Solar MNPV-DISCOMNPV Disconnecting Combiner Box MNPV6 DISCO COMBINERPlease Note: This is an enclosure only, circuit breakers must be purchased separately. The MNPV6 Disco combiner is rated for outdoor use. Designed for combining a max of 6 PV strings rated up to 150VDC, 120 amps total output. The MNPV6 Disco is very flexible. It is ETL listed for AC and DC this allows you to configure it for several different uses. It will work with 1-6 din rail mount, 150V DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect you can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick. FeaturesConvenient disconnect handleAll aluminum powder coated housing that won’t rustFlip up cover that can stay in the open position during installationPV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)Standard din rail to mount up to 6, 150V breakers120 Amp tin plated copper bus bar to combine breaker outputs - bus bar may be split in twoDead front cover snaps into place after wiring is complete for safety ApplicationsPV combiner up to six strings using MNEPV 150 VDC breakers with the MNPV6 DiscoAC Combiner for up to three strings for use with micro inverters using MNEAC 240 VAC BreakersDC load center using MNPV breakers Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSSee our other itemsPayment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Thank you for visiting our Ebay store! Midnite Solar MNPV-DISCOMNPV Disconnecting Combiner Box MNPV6 DISCO COMBINERPlease Note: This is an enclosure only, circuit breakers must be purchased separately. The MNPV6 Disco combiner is rated for outdoor use. Designed for combining a max of 6 PV strings rated up to 150VDC, 120 amps total output. The MNPV6 Disco is very flexible. It is ETL listed for AC and DC this allows you to configure it for several different uses. It will work with 1-6 din rail mount, 150V DC breakers. The combiner also works with 1 of our 600 volt DC breakers for a grid tie disconnect you can also install a 240 volt AC breaker with the 600 volt DC breaker to make a complete disconnect for a grid tie inverter. This configuration makes a compact Grid Tie disconnect for those applications where the built in switch won’t do the trick. FeaturesConvenient disconnect handleAll aluminum powder coated housing that won’t rustFlip up cover that can stay in the open position during installationPV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)PV Negative bus bar with 14 useable openings (10 #14-6 and 4#1/0-14)Standard din rail to mount up to 6, 150V breakers120 Amp tin plated copper bus bar to combine breaker outputs - bus bar may be split in twoDead front cover snaps into place after wiring is complete for safety ApplicationsPV combiner up to six strings using MNEPV 150 VDC breakers with the MNPV6 DiscoAC Combiner for up to three strings for use with micro inverters using MNEAC 240 VAC BreakersDC load center using MNPV breakers